Tender For Advertized Rate List/Bill providing fixing Quantity For Balance Work Of Ntphc Warpora Sopore....................Advertized Cost Rs.192.40 Lacs
Tender Value
1.92 Crore
Estimated cost
Bid Submission
04 Nov 2026
18 days left
EMD
3.84 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Advertized Rate List/Bill providing fixing Quantity For Balance Work Of Ntphc Warpora Sopore....................Advertized Cost Rs.192.40 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil |
| 2 | Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete |
| 3 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level uoto floor five level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages. |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages. |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams,plinth beams, girders, bressumers and cantilevers including all carriages. |
| 8 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately).Kiln seasoned and chemically treated hollock wood with carriage. |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20mm nominal size) including curing complete including all carriages. |
| 11 | 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement:6 coarse sand) including all carriages complete. |
| 12 | Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood including all carriages. |
| 13 | Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS 14616 and as per TADS 15:2001( Part B) using galvanized wire gauze with average width of aperture 1.4mm in both direction with wire of dia 0.63mm as per IS: 1568 for doors, windows and clerestory windows, including ISI marked MS pressed butt hinges bright finished of required size with necessary screws, as per direction of engineer in charge with carriage. |
| 14 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages. |
| 15 | Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications.Painting wood work with deluxe multi surface paint ofrequired shade. Two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture with carriage. |
| 16 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete.On steel work with carriage. |
| 17 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick with carriage. |
| 18 | Distempering with oil bound washable distemper ofapproved brand and manufacture to give an even shade on New work (two or more coats) over and inluding priming coat with water thinnable cement primer including all carriages. |
| 19 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm), including all carriages. |
| 20 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with .1 4.0mm thick glass panes with carriage. |
| 21 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages. |
| 22 | Providing Color coated Hi RIB GS Sheet Roofing fixed Polymer Coated Jor L Hooks Bolts AND NUTS 8 mm dia with Bitumen and GI Implet Washers upto A Pitch of 60 Degrees Excl of Purlins ,Rafters ,Trusses.0.50 MM Thick with zalll other acessories incld carriage. |
| 23 | Providing color ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2 with carriage. |
| 24 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2, including all carriages. |
| 25 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works with carriage. |
| 26 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.) with carriage. |
| 27 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer with carriage. |
| 28 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4) with carriage. |
| 29 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 20mm OD(SDR-7.4)with carriage. |
| 30 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) with carriage. |
| 31 | Providing and fixing PPR Unions PPR Union 20mm with carriage. |
| 32 | Providing and fixing PPR Unions PPR Union 25mm with carriage. |
| 33 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.20 mm nominal bore with carriage. |
| 34 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.20 mm nominal bore with carriage. |
| 35 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank with carriage. |
| 36 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms with carriage. |
| 37 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 with carriage. |
| 38 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg with carriage.. |
| 39 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc all complete for all depths as per direction of Engineer-in-charge.150 mm nominal size dia with carriage. |
| 40 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc all complete for all depths as per direction of Engineer-in-charge. 100mm nominal size dia with carriage. |
| 41 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc all complete for all depths as per direction of Engineer-in-charge. 75 mm nominal size dia with carriage. |
| 42 | Providing and fixing of 1.5 HP Motor Having Unidirectional Flow of Kirloskar /Crompton or Equivalent Make as per relevant IS Specifications including all fittings viz inlet and outlet connections and Electric fittings complete as directed by the site Engineeer with crraige complate. |
| 43 | Provision for Waterproofing of washrooms with water Proofing material in Cement concrete Brick walling @1kg /50 Kg of cement. |
| 44 | Constructing masonry Chamber of specified size, in brick work withcommon burnt clay (non modular) bricks of class designation 7.5 incement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.For water meter complete with C.I. double flap surface box400x200x200 mm (inside) with locking arrangements.Chamber 60x45x50 cm with carriage. |
| 45 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with carriage.. |
| 46 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.W.C. pan with ISI marked black solid plastic seat and lid with carriage. |
| 47 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required.White Vitreous China Wash basin size 630x450 mm with a pairof 15 mm C.P. brass pillar taps with carriage. |
| 48 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets ofthe same materials with snap fittings of approved quality and colour, weighing not less than 105 gms with carriage. |
| 49 | Septic Tank:Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil . |
| 50 | Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete |
| 51 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) with carriage. |
| 52 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages. |
| 53 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) with carriage. |
| 54 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages. |
| 55 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms with carriage complete. |
| 56 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages. |
| 57 | Sokage Pit:Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil. |
| 58 | Dry random rubble masonry with hard stone in foundation and plinth With bond stone.Quarry with carriage. |
| 59 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) with carriage. |
| 60 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages. |
| 61 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages. |
| 62 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete.Size of tile 600x600 mm with carriage. |
| 63 | Providing and laying Ist class Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:3 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown, including all carriages. |
| 64 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(Area of slab upto 0.5 sqm) 16 mm with carriage. |
| 65 | Providing and fixing of Hardware acessories all complete as specified and as directed by the Engineer incharge.Concealed Locks. |
| 66 | Providing and fixing of Hardware acessories all complete as specified and as directed by the Engineer incharge.Handles 150 mm Long. |
| 67 | Providing and fixing of Hardware acessories all complete as specified and as directed by the Engineer incharge.Handles 100 mm Long. |
| 68 | Providing and fixing of Hardware acessories all complete as specified and as directed by the Engineer incharge.Tower Bolt 150 mm. |
| 69 | Providing and fixing of Hardware acessories all complete as specified and as directed by the Engineer incharge.Tower Bolt 100mm. |
| 70 | Providing and fixing of Hardware acessories all complete as specified and as directed by the Engineer incharge.Air Hook 100 mm. |
| 71 | Providing and fixing of Hardware acessories all complete as specified and as directed by the Engineer incharge.Door Stopper 150 mm. |
| 72 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern, including all carriages |
| 73 | Electrifcation:Wiring for light point / exhaust fan point with (P+N) 3X1.5 sq.mm FRLS-H PVC insulated copper conductor single core cable in surface / recessed Conduits , with 6Amp .Modular switch, Modular plate, cover in front and suitable GI box of approved quality and make ISO/IEC/BIS Certified (quality of wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) job including cost of Circuit Wire in 2.5Sqmm Multi strand Copper wire from Switch board to D.B complete. excluding cost of Conduits(wire shall be approved before execution of wok by SITE In-charge Engineer strictly incld carriage. |
| 74 | Supplying and fixing of Two module Stepped type Electronic Fan Regulator on the existing Modular Plate etc as required ISO/IEC certified of Havells /Legrand/Anchor/Schneider/ABB/Eq Make & Shall be approved before execution of work by SDO. |
| 75 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PV C Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit along with 1 x 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop Earthing of approved quality and ISI marked as required. With . 1NO. 16Amp .Modular switch, Modular 1NO.3-PIN . 16 Amp. Socket , Modular plate, cover and suitable GI box etc as required (wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) complete excluding cost of Conduits incld carriage. |
| 76 | Supply and fixing of Suitable size GI Box with Modular Plate and cover in front on surface or in recess including providing and fixing of 6 Pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular Switch ,connections etc as required ISO/IEC certified /Legrand/Anchor Roma plus/Scheider/ABB/Eq Make & Shall be approved before execution of of work by SDO. |
| 77 | Wiring for 6 Amp Plug ( Computer Point) with (P+N+E) 3x2.5 sq.mm FRLS -H PVC insulated Multi standed copper conduit Single Core cable in surface /Recessed conduit (Havells/Anchor/Eq.Make) including all carriages. |
| 78 | Supply and fixing of Suitable Size GI box with modular plate and cover in front on surface or in recess including providing and fixing 2 nos.3 pin 5/6 A modular socket poutlet and 2 nos.5/6 A Modular Switch ,connection etc as required (For Lighting Plugs to be used in non residentail buildings),ISO/IEC certified Hevells /Legrand /Anchor roma Plus/schneider/ABB/Eq.Make & shall be approved before executon of work. |
| 79 | Supply and fixing of Modular Blanking Plate on the existing modular plate and switch box excluded modular plate as required of schneider Liva/Havells/Legrand Myris/Anchor Roma Plus /Eq/Make. |
| 80 | Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/ Recessed medium class PVC conduit as required. [including . Conduites] .(wire shall be approved before execution of wok by SITE In-charge Engineer strictly incld carriage.2x10 sq.mm +1x6 sqmm earth wire. |
| 81 | Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/ Recessed medium class PVC conduit as required. [including . Conduites] .(wire shall be approved before execution of wok by SITE In-charge Engineer strictly incld carriage.2x6 sq.mm +1x6 sqmm earth wire. |
| 82 | Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/ Recessed medium class PVC conduit as required. [including . Conduites] .(wire shall be approved before execution of wok by SITE In-charge Engineer strictly incld carriage.2x4 sq.mm +1x4 sqmm earth wire. |
| 83 | Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/ Recessed medium class PVC conduit as required. [including . Conduites] .(wire shall be approved before execution of wok by SITE In-charge Engineer strictly incld carriage.2x2.5sq.mm +1x2.5 sqmm earth wire. |
| 84 | Supplying and fixing following rating, Double pole, (P +N) 240 V, C* Curve 10 k, Miniature circuit breaker (MCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as reqd. incld carriage.63Amp. Legrand /Havells or L&T /Schneider/ABB/Siemens |
| 85 | 40Amp. Legrand /Havells or L&T /Schneider/ABB/ Siemens |
| 86 | 32Amp. Legrand /Havells or L&T /Schneider/ABB/ Siemens |
| 87 | Supply and fixing of MCB 8 way -way (4+24) ,horizontal typed sheet steel,double Door Distribution Board,TPN 240 V /415 V on surface recess complete with tinned copper bus bar,neutral bus bar ,earth bar ,Din bar ,interconnection,powder painted including earthing erc as required (L& /Siemens/Legrand/Schneider/ABB/Eq make) including all carriages. |
| 88 | Supply and fixing of MCB way 6 -way (4+18) ,horizontal typed sheet steel,double Door Distribution Board,TPN 240 V /415 V on surface recess complete with tinned copper bus bar,neutral bus bar ,earth bar ,Din bar ,interconnection,powder painted including earthing erc as required (L& /Siemens/Legrand/Schneider/ABB/Eq make) including all carriages. |
| 89 | Supply and fixing of MCB way 4-way (4+12) ,horizontal typed sheet steel,double Door Distribution Board,TPN 240 V /415 V on surface recess complete with tinned copper bus bar,neutral bus bar ,earth bar ,Din bar ,interconnection,powder painted including earthing erc as required (L& /Siemens/Legrand/Schneider/ABB/Eq make) including all carriages. |
| 90 | Supply installation testing and commissioning of 18 W + LED Surface Mounted Panel light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India authorised lab . The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips or Havel's or Wipro or Jaguar orBajaj or H.G LUKEER make [Various Locations ] incld carriage. |
| 91 | Providing and fixing of 1k08 IP-66 Protected High Power LED 50 Watt Flood Light system with single piece Pressure diecast Almunium housing, toughened glass diffuser with suitable lenses on LED to achieve various beams angles of High Power LED 3 to 5 watt each intergrated potted driver as a unique BIS R number having effiency more than 85% and in compliance to BIS certified and trade mark certificate. The System Level Luminaire efficiency >=15 Im/wt.LED driver input voltage AC 120 to 270 V AC With High voltage cutt off @>=3000 V AC and Auto resulting safety.Power Factor >0.95,THD(l) <10%,driver current <=750 ma,driver should be phase to phas protection of 440 v for 4 Hrs. Electrical Connector,Surge Protection Minin.>=4kv internal and 10 Kv external but inside driver compartment .System life of 50000 Burning hours with 70% of initial Lumens maintained,CRI>70 and CCT 5700 K,355 k.Manufactirers word Mark /Name Engraved/Embossing /screen Printing on die cast housing to allow traceability/authenticity.Fixtures Shall be IS 10322 complianced.OEM must haave its own in house NABAL lab setup for all testing facilities for LED fixtures (LM79/LM80) certificte /report with liable Warrenty of product / accessories from OEM shall be submitted.All as per pre approved by site Engineer.For additional technical parameters of product /work ,refer BSR -High Power LED Flood Light Minimium Lumen output 6200 IM of Havells /crompton /Philips Make as approved and to be installed on outside block including S/F of suitable size of Gyser bolt.The Job further includes replacement warrenty of fixtures (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successfull commissioning /handling over of site to intending Depertment. |
| 92 | Supply,installing ,testing and Commissioning of 18 W ,4 ft LED tube light complete with CRCA-Sheet Powder coated batten housing (surface mounted) 220-240 V,50 HZ,LED Driver included, suitable for commercial /industrial use as required of Havells /Phillips/Wipro/Halonix/Eq make. |
| 93 | Supply ,Installation,Testing and Commissioning of Decorative 1200 mm Sweep Ceiling Fan with 3 No.Almunium Blades ,30 Cm long down rod, 2 nos.Canopies,Shackle kit, Power factor not less than 0.9, service value including safety Pin,nut bolts,washers ,temperature rise =75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz and including Iron Hook complete.USHA striker /Havells Oyster metalic /Crompton Aura/Equivalent make as directed by Site Engineer. |
| 94 | Supply/Installation/Testing and Commissioning of 225-250 mm Shutter Typed,320 Cu.m/Hr AC 220-240 volts,50 HZ Exhaust Fan Made out of ABS Plastic Material with inbuilt thermo cut off protection and Noise Level not exceeding 37 db of following sized including connection etc USHA/Havells/Crompton/Eq.Make (Min 1-star). |
| 95 | Supply, Installation, Testing and Commissioning of CPRI Approved Main Control Panel conforming to IS/IEC 61439, fabricated from heavy gauge CRCA sheet steel with powder coated finish, dust protected construction, epoxy mounted earth terminals, digital voltmeter, ammeter with selector switch, CTs of suitable ratio, bus bar system, internal wiring and all associated accessories complete.The panel shall comprise:Incoming:200 Amp, 4 Pole, 35 kA, C-Curve MCCB with extended terminals – 01 No.400 Amp TPN Aluminium Bus Bar Set – 01 Set.Digital Voltmeter, Ammeter, Selector Switch, CTs and phase indication lamps – 01 Set.125 Amp, 4 Pole Changeover Switch with bypass arrangement between mains and generator supply – 01 No.Outgoing Feeders:63 Amp DP MCB for Heating Sub-Mains – 06 Nos.40 Amp DP MCB for Lighting/Machine Sub-Mains – 06 Nos.32 Amp DP MCB for Inverter and AC Sub-Mains – 16 Nos.ncluding all interconnections, earthing, testing, commissioning and making complete in all respects as approved by Engineer-in-Charge. |
| 96 | Supply, laying Connecting and commissioning of 70 Sq-mm 3-5 Core PVC insulated and steel armored 11 KV grade Almunium cable of Havells or equivalent make with required size of thumbles dully crimped with hydraute cramping tool including providing and fixing of clips with making of connection and partially to be load undergrounf through DWC High Density Poly enthylene pipe having corrugation on outer wall and plan surface inner wall conforming to IS 14930 Par-l and 2 complete with acessories for protection of 1.1 KV Grade under Ground cable Directly in Ground at a depth of 50 CM including excavation and refilling the trench (Material to be approved before execution). |
| 97 | Providing, Installation, Testing and Commissioning of Environmentally Safe Maintenance Free Copper Rod Earthing System comprising 75 mm dia copper pipe electrode filled with crystalline conductive mixture and eco-friendly GEM backfill compound (2 bags), complete with earth pit chamber (300 mm × 300 mm) and heavy-duty manhole cover. The item includes necessary soil treatment for achieving desired earth resistance, providing and laying 20 mm wide copper strip from earthing rod up to Main Control Panel through DWC HDPE pipe, complete with brass nuts, bolts, spring washers and all accessories required for proper earthing system, complete as directed by Engineer-in-Charge. |
| 98 | Supply, installation, testing and commissioning of 63A, 415V, 5-pin (3P+N+E) industrial type socket outlet conforming to IEC/IS 60309, IP67 protection, heavy-duty wall mounted type, with impact-resistant polyamide housing, brass terminal contacts, suitable for three-phase industrial loads, including all accessories, connections, and labour as required at site. Of Havells/Legrand/L&T/ABB/Eq. make. |
| 99 | Supply and fixing of PVC ceiling rose (2/3 pin), ISI marked, suitable for connection of light/fan point, complete with necessary accessories, including connections and testing as required of Havells/Anchor/Legrand/Eq. make. |
| 100 | Supply and fixing of Hylum sheet (phenolic laminated sheet), 3 mm / 6 mm / 10 mm thick (as specified), duly cut to required size and shape, fixed with necessary nuts, bolts, screws, washers, spacers etc., including finishing and making good the surface, complete as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender