Tender For Misc Repair/Maint Of Ms Shed, Roof Sheet, Kerb Stone, Rolling Shutter Etc To Various Labs At Kwc Under Ge(I)R&D Delhi.
Tender Value
48 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
3 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Misc Repair/Maint Of Ms Shed, Roof Sheet, Kerb Stone, Rolling Shutter Etc To Various Labs At Kwc Under Ge(I)R&D Delhi.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-Nov-2026 |
| 2 | 10-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings etc not exceeding 15cm thick above or below ground level complete all as specified and directed. |
| 2 | M&L for PCC (1:2:04) type B1 (using 20mm graded agg) in lintels upto 1.5m clear span, sills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneeler apexstone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 3 | S&F factory made prepolished chequered cement concrete prepolished coloured tiles (300x300/ 250x250) x 22mm to 25mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 4 | M&L for 100mm thick cement concrete (1:4:8) type D-2 (40mm graded stone aggregate) as in sub base concrete all as specified and directed. |
| 5 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed. |
| 6 | M&L for machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed. Including 20mm thick screed bed or bedding laid in CM (1:6) complete all as specified and directed. |
| 7 | M&L machine cut Granite slab 16mm to 18 mm thick fixed as in repairs for dado, wall cladding, garden walls, staircase, steps, pillars, skirting/dado, window cills, cooking platforms and like and including 10mm thick (avg thickness) CM (1:4) screeding and setting coat in CM (1:2), 3mm thick, set and jointed with white/coloured cement to match the shade of slab including cutting, waste, rubbing and polishing etc complete all as specified and directed. Note:- (i) The rate of granite stone shall be deemed to include for full rounded off corner/edges including all cutting to make it square or rectangular. (ii) The rate shall also be deemed to include for cutting and polishing machine and granite polishing to achieve the desired granite finish all as specified and directed. |
| 8 | M&L for machine made prepolished Rubber moulded precast concrete interlocking paver block (coloured), pre polished of any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60mm thickness M-35 Grade, over and including 25mm average thickness sand cushioning complete all as specified and directed. |
| 9 | M&L for machine made prepolished Rubber moulded precast concrete interlocking paver block (coloured),pre polished of any shape and size with grey cement and pigment conforming to IS 15658-2006 of 80mm thickness M-40 Grade, over and including 25mm average thickness sand cushioning complete all as specified and directed. |
| 10 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. |
| 11 | M&L for brick work straight or curved on plan exceeding 6m mean radius in CM (1:4) with Sub class ‘B’ brick including manhole raising, footpath, etc complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Taking down cement plaster/grit plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 13 | M&L 15mm thick rendering in CM (1:6) on fair faces of new or old brick works or concrete work finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M&L 15mm thick rendering in CM (1:4) on other than fair faces of new or old brick work or concrete work, finished even & smooth without using extra cement complete all as specified and directed. |
| 15 | M&L 5mm thick rendering in CM (1:3) on ceiling new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and as directed. |
| 16 | M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster (1:1/2:2) (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including using white cement in place of grey cement for grit wash complete all as directed.Note:- This item includes use of necessary scaffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate. |
| 17 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions of Engineer-in-Charge.Note:- This item includes use of necessary scaffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate. |
| 18 | M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed. |
| 19 | M&L for preparation of newly plastered or unplastered wall surfaces and applying two coats of acrylic emulsion exterior quality over and including a coat of water based primer complete all as specified. Note:- This item includes use of necessary scaffolding and safety net up to G+5 storey building |
| 20 | M&L preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper(white or tinted) over a coat of alkali resistant primer, complete all as specified and as directed. |
| 21 | M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls including pilasters and cornices etc. including washing, rubbing down and stopping the previously treated surfaces and applying two coats of oil emulsion distemper of approved shade/tint over and including one coat of 1mm thick birla wall care putty to achieve smooth finish complete all as specified and directed. |
| 22 | M&L for preparation of old decorated surfaces of wall (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots etc and applying one coat distemper oil bound emulsion (white or tinted) on walls complete all as specified and directed. |
| 23 | M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls including pilasters and cornices etc. including washing, rubbing down and stopping the previously treated surfaces and two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm including necessary putty work to achieve smooth finish whereever required complete all as specifieda and directed. Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building. |
| 24 | M&L complete removal of existing treatment on wall surfaces with sand paper, iron patti or grinder, including pilasters and cornices etc.and applying two coats of interior acrylic emulsion paint over a coat of 1mm thick birla wall care putty to achieve smooth finish complete all as specified and directed. |
| 25 | M&L complete removal of existing treatment on ceiling surfaces with sand paper, iron patti or grinder, including pillasters and cornices etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots etc and applying two coat of white wash complete all as specified and directed.Note:- This item includes use of necessary scaffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate |
| 26 | M&L preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of tint / shade as approved complete all as specified and directed. |
| 27 | M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of tint as approved complete all as specified and directed. |
| 28 | M&L preparing old painted concrete surfaces and similar surfaces over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 29 | M&L preparation of old plastered outer wall surfaces and applying one coat of cement base paint complete all as specified and directed. |
| 30 | M&L for cement concrete (1:3:6) type C1 (using 20mm stone graded aggregate) as in plinth courses, copings, parapets, saucers drain, kneelers, apex stones, bed blocks, kerbs, water troughs including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 31 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete |
| 32 | M&L preparing newly concrete surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 33 | Excavation in post holes (or similar holes) in soft/loose soil not exceeding 0.50 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil all as specified and directed. |
| 34 | M&L cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete and sub floors etc. complete all as specified and directed. |
| 35 | Dismantling wrought iron or mild steel work of any description not otherwise provided for work including doors, gates, angle post etc. complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F Framed work as in Mild Steel Gate of angle or other section with gusset plate, rails, braces, stair case, barreled iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills and similar work etc Fe.290. Grade-E-165 complete drilled for fixing of steel sheeting or other covering including welding work, PCC (1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks, hinges, necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8m height complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F Mild Steel work in tubular trusses with round/square/rectangular hollow tubular pipes as in rafters, purlins, columns etc for Shed work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge. |
| 38 | M&L mild steel work for flat iron fillets as in wind ties for roof coverings including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed. |
| 39 | Dismantling of Asbestos cement (corrugated semicorrugated etc) sheets in roof covering complete all as specified and directed. |
| 40 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges etc. fixed all as per manufacturer's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhallar) as directed at site fixed all as per manufacturer's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified and directed by Engineer-in-Charge. |
| 42 | M&L for Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, fixed complete all as specified and directed. |
| 43 | Demolition of Reinforced cement concrete work of any description and in any position not otherwise specifically provided. |
| 44 | M&L RCC, (1:2:4) type B-0 (using 12.5mm graded stone aggregate) for slabs supports on walls, drain covers, drain slabs, shelves and similar work complete all as specified and directed. |
| 45 | S&F of TMT bars 10mm diameter and over cut to length bend to shape required including cranking bending, binding with GI wire, placing in position complete all as specified and directed. |
| 46 | Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified and directed. |
| 47 | Use & waste of form work to edge of concrete flats etc exceeding 10cm but not exceeding 20cm wide/thick for fair finished surface of concrete all as specified and directed. |
| 48 | S&F Factory made precast perforated heavy duty drain/ manhole covers including MS frame plate and including reinforcement as per IS 12592 : 2002 with size 1.00m x 0.50m x 75mm thickness complete all as specified and directed by Engineer-in-Charge. |
| 49 | Repairing of rolling shutter push type with necessary repair work of defective parts i.e, re posting of laths, riveting to old defective rivets, tightening nuts and bolts, replacement of spring, greasing to movable parts and at guide channel including taking out and re-fixing rolling shutter for smooth functioning size of rolling shutter not exceeding 6Sqm each all as directed by Engineer-in-Charge. |
| 50 | S&F in repairs mild steel plain sheets covering to door shutter and top cover of rolling shutter cover cut to size, edges beaded as directed, holes punched complete all as specified and directed. |
| 51 | S&F Steel rolling shutters, without ball bearing, with lath thickness 1mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated : push, pull or manual type complete all as specified and directed. |
| 52 | M&L for preparation of old painted steel or iron surfaces as in railing, rolling shutters etc of any description over 10cm width or girth and applying two coat of synthetic enamel paint of tint as approved complete all as specified and directed. |
| 53 | Removing Debris/ demolished materials by mechanical means including loading, transporting, unloading to outside MoD land from 5Km upto 20Km lead at municipal dumping ground complete as per direction of Engineer-in-Charge. |
| 54 | S&F in repair vertical venetian blinds consisting of Aluminium head rail with vanes/louvers 100mm wide of approved tint and travers cord complete fixed in position all as specified and directed by Engineer-in-Charge. |
| 55 | S&F in repair Double roller Zebra venetian blinds consisting of Mounting pelmet assembly of approved tint/shade and traverse cord complete as per manufacturer instruction fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 56 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 57 | M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed by Engineer-in-Charge. |
| 58 | M&L PCC (1:3:6) type C-2, (using 40mm graded stone aggregate) as in plinth protection 75mm thick laid in bays and surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 59 | M&L for joint free glazed coloured ceramic coloured tiles of (300mm x 450mm/ 300mm x 600mm) x 7mm to 8mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM (1:4), all as specified and directed by Engineer-in-Charge. |
| 60 | M&L non-skid, ceramic coloured tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15mm thick average in CM (1:6) complete all as specified and directed. |
| 61 | M&L for Vitrified Ceramic light shade tiles 8mm to 9mm thick polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry, over and including 15mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match complete all as specified and directed. |
| 62 | S&F as in repair vitreous china squatting pan \\"Orissa\\" pattern size 580mm x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed. |
| 63 | S & F in repairs Vitreous China pedestal pattern, \\"EWC\\" white with connection to trap, and to flushing pipe anti-syphonage pipe and including sheet cover and CP jet etc. complete all as specified and directed. |
| 64 | S&F in repairs Vitreous China urinals, bowl type(back or corner wall type) of size 465mm x 355mm x 265mm, complete including providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. complete all as specified and directed. |
| 65 | S&F in repair complete Urinal sensor kit infrared type based on inbuilt motion sensor including battery/Li ion AA duracell cells suitable for sensor type urinal pot of required size complete fitting for proper functioning all as specified and directed. |
| 66 | S&F in repairs vitreous china Urinal, Half stall type white including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and directed. |
| 67 | S&F in repair urinal spreader CP coated for fixing with 15mm diameter PVC connection pipe complete all as specified and directed. |
| 68 | S&F as in repair PVC valveless syphonic action type flushing cistern low level white with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm diameter PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified and directed. |
| 69 | S&F as in repair vitreous china wash hand basin, white flat back, size 550mm x 400mm including pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm diameter, with fly nuts, pvc waste pipe and MS brackets 25mm x 25mm x 5mm thick including cutting for and pinning in ends of brackets, fixed as in repairs complete all as specified and directed. |
| 70 | S&F 15mm diameter PVC connection with brass nut, of length 450mm, fixed as in repairs, complete all as specified and directed. |
| 71 | S&F as in repairs 15mm bore pillar tap fancy type, quarter turn, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 72 | S&F long body Bib taps, fancy type, quarter turn, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 73 | S&F angle stop valve,fancy type ,quarter turn, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 74 | S&F in repairs 15mm diameter stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling portion of the wall as required including making good to match with existing complete all as specified and directed. |
| 75 | S&F as in repairs Chromium plated shower roses 125mm size fixed with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 76 | S&F in repair Toilet paper holder with flat recessed type stainless steel box type fixed to wall, with chromium plated brass screws, complete all as specified and directed. |
| 77 | S&F as in repairs 100mm diameter mild steel chromium plated grating fixed as in repairs complete all as specified and directed. |
| 78 | S&F as in repairs chromium plated waste coupling fitting 100mm / 75mm bore pipes to kitchen sinks complete all as specified and directed. |
| 79 | S&F as in repair 32mm diameter CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed all as specified. |
| 80 | S&F as in repair 40mm diameter CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed all as specified. |
| 81 | S&F in repairs 32mm diameter PVC waste pipe for WHB 60cm long with union complete all as specified and directed. |
| 82 | S&F as in repairs CP Health faucet with 1.50m flexible chromium plated tube and hook fixed to angle valve 15mm bore with accessories complete all as specified and directed. |
| 83 | S&F as in repairs Chromium plated jet spray with CP connection pipe for EWC, 15mm bore with fittings, complete all as specified and directed. |
| 84 | S&F in repairs brass chromium plated tubular towel rail 20mm diameter 60cm long between flanges, fixed to walls with necessary screws complete all as specified. |
| 85 | S&F in repairs brass chromium plated tubular towel ring having diameter of ring not less than 150mm fixed to walls with necessary screws complete all as specified and directed. |
| 86 | S&F in repairs CP brass bottle trap 32mm diameter including joining to waste fitting and waste pipe complete all as specified and directed. |
| 87 | Taking down chowkhats or frames with shutter (without taking off shutters from the frame) of size exceeding 1.5 Sqm but not exceeding 4 Sqm and making good to disturbed surface without any extra cost complete all as specified and directed. |
| 88 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm and making good to disturbed surface without any extra cost complete all as specified and directed. |
| 89 | S&F pressed steel frames for doors with one or more rebates of size 105mm x 60mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25mm thick MS sheet complete all as specified and directed. |
| 90 | M&L for pressed steel frames for doors of size 125mm x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock, strike plates welded with frame and making arrangement for fixing of door spring etc made out of 1.25mm thick MS sheet complete all as specified. |
| 91 | S&F factory made solid PVC door frame size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and directed. |
| 92 | M&L PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in filling hollow of pressed steel frame complete all as specified and directed. |
| 93 | S&F factory made solid panel PVC door shutter 30mm thick stiles consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side and as gap insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and directed. |
| 94 | S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides all as specified and directed. |
| 95 | M&L preparation of new or previously untreated surfaces of wood or based materials of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint coat complete all as specified and as directed. |
| 96 | S&F 100mm size butt hinges, medium weight cold rolled mild steel all as specified and directed. |
| 97 | S&F 150 mm long aluminum anodized barrel tower bolt of extruded section all as specified and directed. |
| 98 | S&F 150mm size aluminum handles cast type, anodized all as specified and directed. |
| 99 | S&F 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy all as specified and directed. |
| 100 | S&F aluminium section powder coated (powder coating not less than 50 micron thick) grill of size 6mm x 4.5mm thick section 10cm centre to centre spacing fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles complete with U-channel all around fixed in window with screws complete all as specified and directed. |
| 101 | S&F anodised aluminium powder coating aluminium section weighing not less than 0.55Kg/m (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified |
| 102 | S&F anodised aluminium Powder coating door shutters aluminium section weighing not less than 0.55Kg/m (minimum thickness of powder coating 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, anodised aluminium snap beading screws, all necessary builders hardware etc complete all as specified. |
| 103 | S&F anodised aluminium Powder coating window and ventilator shutters, side hung type/ sliding type shutter without sash bars aluminium section weighing not less than 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150mm long (1No), hinges type B-21 100mm long (2 No.) suitable handle (1 No) including all necessary builders hardware complete all as specified. |
| 104 | S&F 12mm thick particle board exterior grade with decorative prelaminated both sides of approved shades fixed to aluminium shutters/ partitions complete all as specified and directed. |
| 105 | S&F 4.8mm thick sheet glass ordinary quality in Square/rectangle fixed with glazing pins and rubber beading etc in aluminium door/window/partitions etc complete all as specified and directed. |
| 106 | S&F in repair aluminium anodised fully glazed partly panelled partitions and fixed glazing made out of anodised aluminium section 63.50mm x 38.10mm x 1.60mm including necessary jointing cleats glazing clips, rubber packing anodised alum snap beading screws etc, frame work fixed to walls , floor and ceiling with rawl plug wherever required complete all as specified and directed by Engineer-in-Charge (Sheet glass and particle board shall be measured and paid for separately) Note : Area of each panel shall not be exceeding 01 Sqm. |
| 107 | S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 108 | S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 109 | S&F in repair 110mm bore PVC (SWR) bends with rubber ring joints complete all as specified and directed. |
| 110 | S&F 75mm diameter PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as specified and directed. |
| 111 | S&F 75mm diameter PVC (SWR) bends with rubber ring joints fixed as required complete all as specified and directed. |
| 112 | S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851mm to 1000mm in width and of weight between 61Kg to 80 Kg and fixed complete all as specified and directed. |
| 113 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete all as specified and directed. |
| 114 | S&F in repair 4mm thick sheet glass in squares/rectangle in each pane fixed with oil putty or epoxy in metal/wooden frames etc complete all as specified and directed. |
| 115 | S&F in repair Mortice lock assembly vertical type with one set of lock Handles for fixing on both sides of wooden flush door, including 4 lever lock of required size complete all as specified and directed. |
| 116 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 117 | Providing and fixing tiled false ceiling of specified materials of size 595mmx595mm in true horizontal level, suspended on inter locking GI metal grid of hot dipped galvanized steel sections consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24mmx38 mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross \\"T\\" of size 24mm x 25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main \\"T\\" at 600mm center to center to form a grid of 1200mm x 600mm and secondary cross \\"T\\" of length 600mm and size 24mm x 25mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.3mm and laying false ceiling tiles of approved texture having 8mm to 10mm thick square edge PVC Laminated Gypsum board Tile of size 595mm x 595mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27mm x 37mm x 25mm x 1.6mm fixed to ceiling with 12.5mm diameter and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85mm x 30mm x 0.8mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-Charge. |
| 118 | M&L for decorative wall panelling with PVC louvered/Fluted/Plain 2D/3D wall panels with plastic and silicate mixture as the core material within and surface with PVC foil on the top with thickness of panel 10mm to 20mm, width of 150mm to 200mm and length of 2.74/3.05 (9' or 10') meters of polywood or equivalent brand Wt of PVC panel is 4.5 Kg/Sqm and PVC percentage in wall panels is more than 40% including necessary L/H/U corner profile and fillets. WPC Wall panel are termite proof , water proof and usable on the damp walls, fixed to wall/ ceiling surface as per manufacturer instruction complete all as specified and directed by Engr-in-charge. |
| 119 | M&L for decorative solid Wooden Flooring classic series having HDF (high density fiberboard) wood Plank rectangular shape with interlocking pannels with plastic and silicate mixture as the core material with Plank size 1215mm x 195mm x 8mm kiln dried and finished with UV coating for durable finish of approved wooden texture and shade over and including laying of necessary foam/fiber on floor fixed as per manufacturer instruction complete all as specifed and directed by Engr-in-charge. |
| 120 | S&F L/H/U profile and corner profile molding with fillet at top, bottom and corner to hold the wooden flooring and wall panelling with exactly the same shade as that of the flooring planks as per manufacturer instruction complete all as specified and directed. |
| 121 | M&L preparing old painted concrete surfaces such as chequered tiles, paver blocks etc and similar surfaces over 10cm width or girth and applying two coats of lndigo floor paint over a coat of primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 16, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender