Tender For Special Rep Of Bldg No P-626 (Single Jco Living) Of Certain Units In Jamnagar Mil Stn Under Ge(A) Jamnagar.
Tender Value
39.62 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
15 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
79300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Rep Of Bldg No P-626 (Single Jco Living) Of Certain Units In Jamnagar Mil Stn Under Ge(A) Jamnagar.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down all existing roof treatment incl wire brushing and cleaning loose dust etc from surfaces of RCC roof incl flashing and juntion of parapet complete all as specified and as directed. |
| 2 | Demolition of cement concrete (un-reinforced) in any position not otherwise specifically provided complete all as specified and as directed. |
| 3 | Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc incl brushing neat cement slurry with 3.0 kg of cement per sq metre complete all as specified and as directed. |
| 4 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed. |
| 5 | M&L for water proofing treatment to non assessible RCC roofs by providing 10mm thick rendering in CM 1:3 mixed with & including water proofing compound @3% by weight of cement & applying one coat of bitumenous primer @ 0.30 kg/Sqm and laying APP based polymeric modifed membrane with polyster non woven reinforced of weight not less than 3kg/Sqm of 3 mm thick with polythene finished sealing with side overlaps of 75mm & 100 mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint (0.20 litre per sqm) complete all as specified and directed.(Note:- Water proofing compound shall be measured and paid saperately.) |
| 6 | Supply only liquid waterproofing compound complete all as specified and as directed. |
| 7 | M&L 25 mm thick PCC 1:2:4, type B0 (using 12.5mm size stone aggregate) using integral WPC as per manufacturer instuctions will compacted with V shaped groove of 10mm deep filled with mastic bitumen size of PCC panel with groove shall not exceeding 0.4 sqm complete all as specified and as directed. |
| 8 | M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggegate) as in copinges, plinth band, parapets, ralinges and outer wall upto 60 cm in height etc complete including necessary form work complete all as specified and as directed. |
| 9 | M&L 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in plinth protection complete all as specified and as directed. |
| 10 | M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A complete all as specified and as directed. |
| 11 | Taking down of cement plaster of any description on brick/stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 12 | M&L for rendering 10mm thick on fair faces on brick masonary or concrete surfaces in cm 1:6 finished complete all as specified and as directed. |
| 13 | M&L for Prepration of newly plastered on walls by hand held sander / long handle sander including cornices, pilasters etc complete all as specified directed and applying two coat of oil bound distemper over one coat of acrylic water based interior grade primer @ 0.7 ltr(undiluted )/10sqm diluted with water in 1:1 ratio (Minmum ) or as per approved manufacturers instructions to be applied on prepared and wall (interior) surface, over a coat 1 mm thick wall care waterproof cement based putty on walls complete as specified Notes:-(i)Filling cracks in wall using crack seal compound Asian smart crack seal or equivalent.Notes:- (ii) make -BergerHomeshield waterproof putty ,Asain paint smartcare waterproof putty , Nerolac prema waterproof putty ,Berger Homeshield waterprrof putty ,(iii) Approved OEM equipment to be used as per technical & site requirement and as mentioned above. |
| 14 | M&L 15 mm thick rendering on other than fair faces of external wall of brick masonary or concret surfaces in two layers Ist layer shall be 10mm in cm 1:6, secound and final layer shall be 5mm thick in CM 1:4 finished fair and even without using extra cement mixed with integral water proofing compound |
| 15 | M&L Prepration of newly plastered surface of wall by hand held sander / long handle sander including cornices, pilasters etc and appliying with Airless spray two or more coats of Anti fungal Weather proof grade exterior acrylic emulsion paint @ 0.2 lt (undiluted) /10 sq mtrs diluted with water in 1:1 ratio (Minimum) of approved tint as per approved manufacturers insttruction over prepared and primed surface of external wall over and including one coat of acrylic water based Exterior grade rpimer @0.9 ltr (undiluted)/10 sq mttr diluted with water in 1:1 ratio (minium) as per approved manufacturer's instructions to be applied on prerated and wall (external) surfaces. complete all as specified and directed. |
| 16 | M&L 5 mm thick rendering on ceiling or concrete surfaces in cm 1:3 finish even and smooth complete all as specified and directed. |
| 17 | M&L for Prepration by hand held sander / long handle sander including cornices, pilasters etc of newly plastered on ceiling complete all as specified directed and applying three coat of white wash, complete all as specified and as directed. |
| 18 | M&L complete removal of existing tretment by hand held sander / long handle sander washing down with Jet washer and appliying Airless spray two or more coats of Anti fungal Weather proof grade exterior acrylic emulsion paint @ 0.2 lt (undiluted) /10 sq mtrs diluted with water in 1:1 ratio (Minimum) of approved tint as per approved manufacturers insttruction over prepared and primed surface of external wall over and including one coat of acrylic water based Exterior grade rpimer @0.9 ltr (undiluted)/10 sq mttr diluted with water in 1:1 ratio (minium) as per approved manufacturer's instructions to be applied on prerated and wall (external) surfaces. complete all as specified and directed. |
| 19 | Complete removal of existing treatment of old surfaces of wall including preparation of surfaces by hand held sander / long handle sander including cornices, pilasters etc and applying two coats of oil bound distemper over one coat of acrylic water based interior grade primer @ 0.7 ltr (undiluted) /10sqm diluted with water in 1:1 ratio (Minmum ) or as per approved manufacturers instructions to be applied on prepared and wall (interior) surface, over a coat 1 mm thick wall care waterproof cement based putty on walls complete as specified Notes:-(i)Filling cracks in wall using crack seal compound Asian smart crack seal or equivalent.Notes:- (ii) make -BergerHomeshield waterproof putty ,Asain paint smartcare waterproof putty , Nerolac prema waterproof putty ,Berger Homeshield waterprrof putty ,(iii) Approved OEM equipment to be used as per technical & site requirement and as mentioned above. |
| 20 | M&L Preparation of old surfaces of wall removing nails including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) , filling undulation and holes with putty and applying one coat of oil bound distemper with roller finish complete all as directed.on walls etc.complete as specified and as directed by Engineer-In-Charge. |
| 21 | M&L for preparation of old plastered surfaces of ceiling by hand held sander / long handle sander including cornices, pilasters etc and applying one coat of white wash complete all as specified and as directed. |
| 22 | M&L preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 23 | S&F coloured aluminium anodised sliding window of 3 track, frame of section 92mm X 32mm X 1.47 mm or appropriate equivalent section and shutters of section 18 mm X 44 mmX 1.35 mm or appropriate equivalent section ,aluminium sections weighting 0.55 Kg/m, fixed with 4.80/5mm thick tinted glass with rubber gasket, handles, locking arrangement and SS wire mesh,aluminium powder coated any colour (powder coating not less than 50 micron) incl making good jambs, cills etc including taking down old iron window complete all as specified and directed by the Engr-in-Charge.(make: Hindalco/Indal/Jindal or equvalent)Note : rate shall include all glazing/SS wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc |
| 24 | S&F in powder coated aluminium fixed louvered ventilator, frame of section 63.5mm X 38.1mm X 1.01 mm or appropriate equivalent section with 4 mm thick figured/frosted sheet glass with rubber gasket,Aluminium wire mesh, handles, locking arrangement etc incl making good jambs, cills etc and including taking down old iron ventilator complete all as specified and directed by the Engr-in-Charge.(make: Hindalco/Indal/Jindal or equvalent) |
| 25 | S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 26 | M&L preparation of new untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and directed. |
| 27 | M&L preparation of old treated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint and red oxide primer complete all as specified and directed. |
| 28 | S&F in repair SS Curtain Rod Decorative pattern as approved by Engr-in-Charge complete all as specified and as directed. |
| 29 | S&F in repair SS Curtain Rod Bracket decorative type all as approved by Engr-in-Charge complete all as specified and as directed. |
| 30 | Demolition of brick work or stone/boulder masonry built in cement mortor or cement lime mortar incl all quoins,arches,pillars etc complete all as specified and as directed. |
| 31 | M&L for brick work with sub class `B' old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed. |
| 32 | Removal of all loose/unsound/bad/damaged concrete or plaster existing RCC structure of slab/beams/walls/chajja by using chesel/hammar .Cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement . clean loose rust from bars manually with brush . fixing new supplymentary bars if required,either by tying it with existing bars or by welding on it. Applying epoxy bonding agent and making good with polymer modified plaster/micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface in ground floor including formwork complete all as specified and directed. |
| 33 | M&L for racking of cracks upto 5 mm wide ,preparation and crack filling with ready to use crack fiber reinforced filler /chemical based crack fillers by approved manufacturer and filling as per manufacturer instructions in walls,roofs of any type or size complete all as specified and directed. (Make: Pidilite/dr fixit,fosroc, or equivalent) |
| 34 | M&L for racking of cracks exc 5 mm but not exc 10mm wide ,preparation and crack filling with ready to use crack fiber reinforced filler /chemical based crack fillers by approved manufacturer and filling as per manufacturer instructions in walls,roofs of any type or size complete all as specified and directed. (Make: Pidilite/dr fixit,fosroc, or equivalent) |
| 35 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed. |
| 36 | Taking down shutters of any description exc 1 sqm but n exc 2 sqm and refixing after easing and adjusting in size as required to site complete all as specified and directed |
| 37 | S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,Size of frame 110X60 MM complete all as specified and directed. |
| 38 | S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,Size of frame 125X60mm complete all as specified and directed. |
| 39 | S&F 35 mm thick Flush shutters, solid core constuction, with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed. (Make: M/s Goel Brothers/M/S Jain Doors/ M/s India woo or equvalent) |
| 40 | S&F factory made 35mm thick 2nd class hard wood glzed & skeleton door shutters,open rebated and prepared to recieve gauge etc(without sash bars) edgs of framing plain, chamfered or etc,size of members of shutters as specified in SSR Pt-I, Sec-8 Clause 8.20 (a) without sash bar etc all as specified and directed. |
| 41 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with second class hard wood beadings in any type of door as per directed |
| 42 | S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150mm complete all as specified and directed. |
| 43 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long complete all as specified and directed. |
| 44 | S&F in Aluminium handles, cast type, anodised 150mm long complete all as specified and directed. |
| 45 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, 140 mm with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 46 | S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 47 | M&L preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 48 | M&L preparation of old untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed |
| 49 | Demolition for reinforcement cement concrete of any description in any position complete all as specified and as directed. |
| 50 | M&L for precast RCC 1:2:4 type B1 using 20mm graded stone aggregate in in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs, mangers, shelves and similar articles with plain faces etc Set in cement mortar 1:4 complete all as specified and as directed. Note:-reinforcement measured seperately |
| 51 | M&L for TMT bars 6 to 8mm dia and over cut to length bent to shape required including bending and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 52 | M&L use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) with rough finished surfaces of concrete in flat complete all as specified and directed. |
| 53 | M&L for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide with rough finished surfaces of concrete in flat complete all as specified and as directed. |
| 54 | Dismantling water tank 500 ltr capacity removing to store complete all as specified and as directed. |
| 55 | S & F 500 liters rotaional moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996 and PTMT 20mm ball valves/ float valve high pressure with epoxy aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gms) , hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc, complete as specified in SSR Part-I complete all as directed by Engr -in-charge. |
| 56 | S&F in Repairs angular cock valves regular body with adjustable wall flange 15 mm dia screwed down fixed and joint with adhesive , taflon tape.(Make: Jaquar,Cera or equivalent) CAT NoPR 544 and as selected,specified and directed by Eng-in-charge. |
| 57 | Taking down steel tubing and connections including cleaning for refixing or removal to store of 20 mm dia complete all as specified and as directed. |
| 58 | Taking down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 59 | Cutting chases,pinning in, in stone concrete block or slab walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc and cutting chases for concealed water tubing etc and making good cuttong not exc 10 cm girth complete all as specified and as directed. |
| 60 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass cpvc fittings and cutting grooves, filled with CM1:6 complete all as specified and as directed. |
| 61 | Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors iincluding all connected brass cpvc fittings and cutting grooves, filled with CM1:6 complete all as specified and as directed. |
| 62 | M&L for 40 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate mixed with liquid water proofing compound @ 3% of cement in bottom of sunken floors complete all as specified and as directed. |
| 63 | M&L Cleaning vertical and horizontal surfaces of sunken slab using wire brushing followed by sanding with emery paper for loose materials/dust and applying two coats of epoxy resin component (Dr. Fixit DAMPGUARD or equivalent) solution/mix using nylon brush pouring Base part in appropriate container followed by the Hardner part and mix thoroughly to attain homogeneous smooth paste and dilute the mixed compound with water in ratio 1 part Base: 1 part Hardner: 1 part water by slow addition and mix thoroughly until a brushable consistency is obtained, first coat will be allowed to dry for 6 to 8 hrs before application of second/final coat) incl curing treated surface for 24 hrs complete incl applying evenly a coat of blown bitumen @ 1.5kg/sqm over entire treated surfaces incl spout holesbefore filling lean concrete complete and all as specified as per manufacturer instruction. |
| 64 | M&L 15mm thick rendering in cement plaster 1:3 with WPC on bottom and side walls of sunken floor incl finished even and smooth w/o using extra cement complete all as specified and as directed. |
| 65 | M&L filling PCC type E-2 1:5:10 (40 mm graded stone aggr) as in sunken floor after applying appropriate treatment to side walls complete all as specified and as directed. |
| 66 | S&F in repair Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed. |
| 67 | S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 68 | S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', double socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 69 | S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 70 | S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', double socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 71 | S&F in repairs 110mm PVC (SWR) single T equal or unequal complete all as specified and as directed. |
| 72 | S&F in repairs PVC(SWR) bend any radius, 110 mm dia complete all as specified and as directed. |
| 73 | S&F in repairs PVC(SWR) bend any radius, 75 mm dia complete all as specified and as directed. |
| 74 | S&F in repairs PVC(SWR) Tee any radius, 75 mm dia complete all as specified and as directed. |
| 75 | S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and as directed. |
| 76 | S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed. |
| 77 | S&F in repairs110 mm dia PVC (SWR) vent cowl complete all as specified and as directed. |
| 78 | S&F in repair fancy type CP bib taps fancy type , 15 mm bore with crutch or , screwed down complete all as specified and as directed. |
| 79 | S&F in repairs Pillar taps fancy type 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe/cpvc pipe and fixed complete all as specified and as directed. |
| 80 | S&F in repairs stop valve chromium plated with 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 81 | S&F in repairs corner glass shelf 300mm and as approved by engineer in charge complete all as specified and as directed. |
| 82 | S&F in repairs glass shelf 300mm as approved by Eng-in-charge complete all as specified and as directed. (Make:Prayag, Jaquar,Cera or equivalent) |
| 83 | S&F decorative type ( cup board type) Mirror of 5/6 mm thick with beveled /grind without beading and CP screw with plugs complete all as specified and as directed. |
| 84 | S&F in repairs Brass CP wall Mixer for mixing hot & Cold water screwed down for iron pipe and fixed.make and joint with adhesive , taflon tape series Mist Cat No:6775Prayag (Make: Prayag,Jaquar,Cera) |
| 85 | S & F in repairs brass chromium plated over head shower with arm 255 mm with flange size fency type with or without swival joints any size including fixing to steel pipe 15mm bore union sand joint with adhesive , taflon tape.make:Series:Tranquil Code No: BS-73 Prayag (Make: Prayag,Jaquar,Cera) |
| 86 | S&F in Repairs Soap Dish. (Make: Prayag,Jaquar,Cera or equivalent) Cat No BA-05and as selected,specified and directed by Eng-in-charge. |
| 87 | S&F in repairs toilet paper holder fancy type .(Make:Prayag, Jaquar,Cera or equivalent) Cat No BA-08 and as selected,specified and directed by Eng-in-charge. |
| 88 | S&F s/s peg set hangers for wall & behined door fixed with screws complete .all complete as per the direction of Engineer-in-charge. |
| 89 | S&F in repairs Towel ring with Round flange (medium) dimension 20LX20WX20H centimeters .(Make:Prayag, Jaquar,Cera or equivalent) Cat No BEA -43 and as selected,specified and directed by Eng-in-charge. |
| 90 | S&F in repair stainless steel towel rail long (Make:Prayag, Jaquar,Cera or equivalent) Cat No BA -01and as selected,specified and directed by Eng-in-charge. |
| 91 | S&F in Repairs Towel Rack .(Make: Prayag,Jaquar,Cera or equivalent) Cat No BA-03and as selected,specified and directed by Eng-in-charge. |
| 92 | S & F vitreous china squatting pan `Orissa` pattern size 580x440mm white with P or S trap front or back inlet and with intergal foot rests . complete all as directed. |
| 93 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, white (excluding fixing bolts, flushing cistern and flush pipe).(Make : Cera / Prayag/Parryware or equivalent) |
| 94 | S & F plastic water closet seat for pedestal pan,black(coloured) closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and complete all as specified |
| 95 | S&F Stop cock two way 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed all ends for iron pipe or for unions and taking down old stop cock.(Make: Prayag,Jaquar,Cera or equivalent) |
| 96 | S&F CP Health Faucet with 1.50mtr tube & Hook any description including flexible attachment as,specified and directed by Eng-in-charge(Make: Prayag,Jaquar,Cera) |
| 97 | S&F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals etc all as specified and directed. |
| 98 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 99 | S/F in repairs PVC valveless syphonic action type ,flushing cistern Low level white,with,with inlet ball valve ,float and handle 10 Ltr capacity including brackets complete all as specified and as directed. |
| 100 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed. |
| 101 | M&L for machine cut kota stone slab flooring 20-25mm thick over 20 mm thick CM 1:4 bedding layer laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 102 | M&L for machine cut kota stone slab 20-25 mm thick in riser of step ,skirting, dado,vertical partition and pillar laid over cement screed etc, piece machine polished laid over and jointed in cement slurry and pointed in grey cement and pigment to match the colour of slab,10mm thick rendering as in backing coat for skirting/dado in CM (1:3) with on wall surfaces complete all as specified and as directed. |
| 103 | M&L for mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed. |
| 104 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm screed bed in CM 1:4 complete all as specified and as directed. |
| 105 | S&F Non-skid ceramic coloured tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thck screed bed in CM 1:4 complete all as specified and as directed. |
| 106 | M&L Glazed ceramic coloured designer tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 0ver 10mm thick plaster in cement mortar (1:3) complete all as specified and as directed.(Make: Somany/Johnson/Orient Bell or equivalent) |
| 107 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and as directed. |
| 108 | Removing excavated materials to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m from starting point complete all as specified and as directed. |
| 109 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and as directed. |
| 110 | Demolition and breaking up sewage drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (Internal dia of pipe in 150 mm) complete all as specified and as directed by the Engineer-in-Charge. |
| 111 | M&L Reinforced concrete pipes 150mm ,class NP 2 laid and jointed complete with collars complete all as specified and as directed. (Make Everest/ Hume pipe/Himalya or equvalent) |
| 112 | M&L for cement concrete bedding and haunching against the sides of pipes after they are laid to 150 mm bore drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) laid to falls including packing under, and tested, complete all as specified and directed. NOTE :- Pipe shall be measured and paid separately). |
| 113 | M&L for guniting/shotcrete using shrinkage controlled, polymer modified fiber reinforcement cementitious mortar ( Fosroc rendroc SP-40 or equivalent) using guniting / shotcrete pumps and allied equipment as required including taking out all loose material from repairable surface cleaning and exposing reinforcement etc where required and applying a coat of epoxy bonding agent to existing concrete surface and rust proof primer to reinforcement before shotcrete/ guniting complete all as repair complete all as specified and as directed. |
| 114 | M&L for providing and laying flowable self-compacting micro concrete (Roff Crete repair of Pidilite or equivalent) having ability to penetrate into the recases of concrete members and behind the reinforcement of the member to be repaired, blend of selected portland cement and specially graded micro fine aggregate, fillers and a range of fluidifiers. Surface to be repaired shall be made clean of loose materials /concrete, dust, oil, paint, grease etc and reinforcement be exposed fully where corroded and scales/corrosion deposit be removed (wherever required supplementary reinforcement shall be fixed and paid under Ser Item Nos 95 and including appling rust removal primer on reinforcement and coat of bonding agent (Roff concrete Bond Gp or equivalent) to repair substrate before pouring of micro concrete. Note:- Rates shall be including necessary impermeable framwork where ever required |
| 115 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 116 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 117 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 118 | Taking down ceiling fan/ Exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Jamnagar complete all as specified and as directed. |
| 119 | M & L for Point wiring for one light point controlled by one, one way switch 5 Amps using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed |
| 120 | Description all as per item No 120 above but for One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed by Engr-in-Charge. |
| 121 | Description all as per item No 120 above but for one light point controlled by two way switch complete all as specified and directed by Engr-in-Charge. |
| 122 | Description all as per item No 120 above but for one 3pin 5Amp switch socket outlet point controlled by one switch on same board complete all as specified and directed by Engr-in-Charge. |
| 123 | Description all as per item No 120 above but for one 3pin 5Amp switch socket outlet point controlled by one switch on independent board complete all as specified and directed by Engr-in-Charge. |
| 124 | Description all as per item No 120 above but for one bell point controlled by one bell switch 5 Amp complete all as specified and directed by Engr-in-Charge. |
| 125 | Description all as per item No 120 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed by Engr-in-Charge |
| 126 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and,cutting chases for concealed water,tubing or concealed conduit wiring,,etc., and making good, cutting not,exc 10 cm girth ®(stone massonary) complete all as specified and as directed by Engineer -in-Charge. |
| 127 | S & F for modular switch piano flush type, single pole, one way, and 5/6 Amp single module two way complete all as specified and as directed by Engineer -in-Charge. |
| 128 | S & F for modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified and as directed by Engineer -in-Charge. |
| 129 | S & F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and as directed by Engineer -in-Charge. |
| 130 | S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and as directed by Engineer -in-Charge. |
| 131 | S & F for modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and as directed by Engineer -in-Charge. |
| 132 | S & F for modular step type fan regulator (BLDC) 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 133 | S & F for bell push modular , 6 Amp single module complete all as specified and as directed. |
| 134 | S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and as directed. |
| 135 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 136 | S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 137 | S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 138 | S & F for MCB Tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 139 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 140 | Taking up/down GI tubing and connections 40mm size of pipes including all fittings complete all as specified and directed. |
| 141 | S&F tube GI medium grade 25mm dia with all fittings laid in trenches complete all as specified and directed. |
| 142 | S&F tube GI medium grade 40mm dia with all fittings laid in trenches complete all as specified and directed. |
| 143 | S&F gun metal valvs with iron wheel head ,screwed both ends for iron pipe and fixed of size 25 mm complete all as specified and directed. |
| 144 | M&L for filling dry and clean sand in trenches for cable cushioning 8cm below and 15 cm above complete all as specified and directed. |
| 145 | M&L for un reinforced precast concrete cable cover, LV low voltage type-I flat size 250mmx150mmx40mm complete all as specified and directed. |
| 146 | M & Lfor XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 Volts grade cross sectional area of 25 Sqmm 4 core laid in trenches under floor/road/hard standing, along poles etc complete all as specified and as directed by Engineer-in-charge. |
| 147 | S&F GI pipe light grade 40mm bore for cable protection fixed to poles/along wall/floor/under road/acrossthe drain or nallah including taking down old unservuceable GI pipe complete all as specified and as directed by Engineer-in-charge. |
| 148 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 149 | S & F for ceiling fan, 230 Volts, 1200 mm sweep with mian air delivary 210 CFM, service value of the fan shall be greater than 6.1 (5 star rated) as per BIS with blades, down rod & other necessary accessories with brushless direct current motor (BLDC) with out remote system and electrical connections from ceiling rose to fan teriminal complete all as specified and as directed |
| 150 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 151 | S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted). |
| 152 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 153 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender