Tender For Repair And Maintenance (Civil, Plumbing And Carpentry) Works Of Quarter No. 1(Level-1) Of Koutilya Marg And Chankaya Marg At Smvdu, Kakryal, Katra
Tender Value
20.93 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
5 days left
EMD
42000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance (Civil, Plumbing And Carpentry) Works Of Quarter No. 1(Level-1) Of Koutilya Marg And Chankaya Marg At Smvdu, Kakryal, Katra
BOQ
| Sl. No. | Item Description |
| 1 | Repair and maintenance of Civil, Plumbing and Carpentry works of Quarter no. 1 (Level-1) Koutilya Marg at SMVDU, Kakryal, Katra |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead |
| 3 | Of area of 3 sqm. and below |
| 4 | Of area beyond 3 sqm |
| 5 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : |
| 6 | Of area of 3 sqm. and below |
| 7 | Half brick masonry with common burnt clay (non-modular) bricks of class designation7.5 in foundations and plinth including curing in : |
| 8 | Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 9 | Extra for half Brick masonry in superstructure above plinth level upto floor V level |
| 10 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorophriphos/Lindane emulsifiable concentrate of 20% |
| 11 | Along the external wall below concrete or masonry apron using chemicalemulsion (Chloropyriphos / Lindane E.C. 20% with 1% concentration)@ 2.25 litres/ linear meter including drilling & plugging holes etc. |
| 12 | Treatment of existing masonry using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration)@ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement :2 coarse sand) to the full depth of hole: |
| 13 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead |
| 14 | With cement mortar 1:4 (1 cement : 4 fine sand |
| 15 | 12mm Cement plaster of mix: |
| 16 | 1 : 4 ( 1 cement : 4 fine sand ) |
| 17 | Frames and trusses Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Sal wood |
| 18 | Sal wood |
| 19 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) |
| 20 | Second class deodar wood (35mm) |
| 21 | Second class deodar wood (30mm) |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 23 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : |
| 24 | Second class deodar wood |
| 25 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows(Area ofopening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm |
| 26 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. |
| 27 | With Galvanized M.S. Wire gauge with wire of dia 0.63 mm |
| 28 | Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete |
| 29 | Sample shall be approved by engineer incharge |
| 30 | Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete. |
| 31 | 100X60X2.50mm |
| 32 | 75x50x2.50 mm |
| 33 | Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. |
| 34 | providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 35 | 200x10 mm |
| 36 | 100x10 mm |
| 37 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete |
| 38 | 250x16 mm |
| 39 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 40 | 125 mm |
| 41 | 100 mm |
| 42 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 43 | Twin rubber stopper |
| 44 | Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to |
| 45 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 46 | 25 mm thick (for cupboard) including ISI marked nickel plated brightfinished M.S. Piano hinges IS: 3818 marked with necessary screws. |
| 47 | Extra for providing and fixing flush doors with decorative veneering instead of non-decorative ISI marked flush door shutters conforming to ISI: 2202 (Part-I) |
| 48 | On one side only |
| 49 | Providing and fixing chromium plated brass curtain rod having wall thickness 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :25 mm dia. |
| 50 | Providing and fixing special quality chromium plated brass cupboard locks of approved quality with six levers including necessary screws etc. complete : |
| 51 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. |
| 52 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Dismantling steel work in single sections including dismembering and required colour or shade with necessary screws etc. complete |
| 53 | KOTA STONE FLOORINGKota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 54 | Rubbing and polishing of old chips laid on the flooring of rooms,lobby etc. by engaging labour and machinary including polishing on existing floor. |
| 55 | Rubbing and polishing of kota stone and marble flooring of steps and existing floor etc. by engaging labour and machinary including polishing on existing floor. |
| 56 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 57 | Applying priming coat: |
| 58 | With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 59 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade |
| 60 | Two or more coats on new work |
| 61 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 62 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 63 | Finishing walls with Acrylic smooth exterior paint of required shade: |
| 64 | Old work (one or more coats applied @ 0.90 liters/ 10sqm) |
| 65 | Water proofing treatment of RCC sunshade with Zycosil/equivalent water proofing Solution (1 litre of Zycosil/equivalent & 20 litres of water stirred first & 2 litres of Zycoprime/equivalent added and stirred (total 23 litres)) till it meets the saturationlevel and testing as per RILEM or by water drops test in which water drops do not absorb but drops remain or rolls. |
| 66 | CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12mm Cement plaster finished with a floating coat of neat cement of mix 1 : 4 ( 1 cement : 4 fine sand |
| 67 | Repair and maintenance of Civil, Plumbing and Carpentry works of Quarter no. 1 (Level-1) Chankaya Marg at SMVDU, Kakryal, Katra |
| 68 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead |
| 69 | Of area of 3 sqm. and below |
| 70 | Of area beyond 3 sqm |
| 71 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : |
| 72 | Of area of 3 sqm. and below |
| 73 | Half brick masonry with common burnt clay (non-modular) bricks of class designation7.5 in foundations and plinth including curing in : |
| 74 | Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 75 | Extra for half Brick masonry in superstructure above plinth level upto floor V level |
| 76 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorophriphos/Lindane emulsifiable concentrate of 20% |
| 77 | Along the external wall below concrete or masonry apron using chemicalemulsion (Chloropyriphos / Lindane E.C. 20% with 1% concentration)@ 2.25 litres/ linear meter including drilling & plugging holes etc. |
| 78 | Treatment of existing masonry using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration)@ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement :2 coarse sand) to the full depth of hole: |
| 79 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead |
| 80 | With cement mortar 1:4 (1 cement : 4 fine sand |
| 81 | 12mm Cement plaster of mix: |
| 82 | 1 : 4 ( 1 cement : 4 fine sand ) |
| 83 | Frames and trusses Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Sal wood |
| 84 | Sal wood |
| 85 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) |
| 86 | Second class deodar wood (35mm) |
| 87 | Second class deodar wood (30mm) |
| 88 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 89 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : |
| 90 | Second class deodar wood |
| 91 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows(Area ofopening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm |
| 92 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. |
| 93 | With Galvanized M.S. Wire gauge with wire of dia 0.63 mm |
| 94 | Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. (Sample shall be approved by engineer incharge ) |
| 95 | Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete. |
| 96 | 100X60X2.50mm |
| 97 | 75x50x2.50 mm |
| 98 | providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 99 | 200x10 mm |
| 100 | 100x10 mm |
| 101 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete |
| 102 | 250x16 mm |
| 103 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 104 | 125 mm |
| 105 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 106 | Twin rubber stopper |
| 107 | Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to |
| 108 | Providing and fixing panelling or panelling and glazing in panelled or panelled Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 109 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 110 | 25 mm thick (for cupboard) including ISI marked nickel plated brightfinished M.S. Piano hinges IS: 3818 marked with necessary screws. |
| 111 | Extra for providing and fixing flush doors with decorative veneering instead of non-decorative ISI marked flush door shutters conforming to ISI: 2202 (Part-I) |
| 112 | On one side only |
| 113 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). |
| 114 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) |
| 115 | Providing and fixing chromium plated brass curtain rod having wall thickness 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :25 mm dia. |
| 116 | Providing and fixing special quality chromium plated brass cupboard locks of approved quality with six levers including necessary screws etc. complete : |
| 117 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. |
| 118 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 119 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Dismantling steel work in single sections including dismembering and required colour or shade with necessary screws etc. complete |
| 120 | KOTA STONE FLOORINGKota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 121 | Rubbing and polishing of old chips laid on the flooring of rooms,lobby etc. by engaging labour and machinary including polishing on existing floor. |
| 122 | Rubbing and polishing of kota stone and marble flooring of steps and existing floor etc. by engaging labour and machinary including polishing on existing floor. |
| 123 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 124 | Applying priming coat: |
| 125 | With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 126 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade |
| 127 | Two or more coats on new work |
| 128 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 129 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 130 | Finishing walls with Acrylic smooth exterior paint of required shade: |
| 131 | Water proofing treatment of RCC sunshade with Zycosil/equivalent water proofing Solution (1 litre of Zycosil/equivalent & 20 litres of water stirred first & 2 litres of Zycoprime/equivalent added and stirred (total 23 litres)) till it meets the saturationlevel and testing as per RILEM or by water drops test in which water drops do not absorb but drops remain or rolls. |
| 132 | CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12mm Cement plaster finished with a floating coat of neat cement of mix 1 : 4 ( 1 cement : 4 fine sand |
| 133 | Providing and fixing OVER HEAD SHOWER of approved quality conforming to IS standards. |
| 134 | Providing and fixing SHOWER ROD 9” of approved quality conforming to IS standards. |
| 135 | Providing and fixing P.V. CONNECTORS 18” of approved quality conforming to IS standards. |
| 136 | Providing and fixing Jet Spray with tube of approved quality conforming to IS standards. |
| 137 | Providing and fixing GEYSER 35 LTR of approved quality conforming to IS standards. |
| 138 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 139 | Providing and fixing 600x450mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 140 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete. |
| 141 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 142 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank per liter capacity 8.7 |
| 143 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender