Tender For Providing Borewell And Supply & Erection Of Submersible Pumpset At Ward No 10 Anna Nagar In Madukkarai Municipality
Tender Value
6.60 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
7 days left
EMD
6600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Borewell And Supply & Erection Of Submersible Pumpset At Ward No 10 Anna Nagar In Madukkarai Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Hydrogeological survey charges for locating borewell drilling etc., complete as per standard specifications. |
| 2 | Drilling of 150 mm Dia Vertical Borewell in Hard Rock area including all incidental charges, transportation etc., Complete as per standard specification. |
| 3 | Up to 150M Below G.l |
| 4 | 151M Upto 180M |
| 5 | 181M to 210M |
| 6 | 211M to 240 |
| 7 | 241M to 270 |
| 8 | 271M to 300M |
| 9 | Supply,delivery and erection of antiplasticied plain 150mm dia PVC casing pipes in 6m length with screwed and socked as per ISI 2818/1992 and as amended from time to time to suit deep borewell upto 80m depth (CS) for delivery at site including loading, unloading freight charges and insurance etc complete. |
| 10 | Supply and delivery of LT Three phase wet type 10.00 HP submersible motor pump suitable for 150mm dia bore well conforming to IS 8034/2002 specification MER 10/40 and as amended time to time suitable for installation. Pumps should control panel board from MS sheet 18 gauge with suitable DOL starter. MCB, dry run preventor, 16 Amps conductor, Voltameter up to 250V 1 No. overload relay on off push button indicator lamps with suitable capacitor. 50 Lpm / 225M.H without panel board |
| 11 | Supplying and delivery of the following water supply materials with ISI specification |
| 12 | Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale,Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating,Single phasing preventor, dry running preventor and On/Off Push button switches,wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). Three Phase panel board for 10.00HP Motor |
| 13 | PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER 4sqmm |
| 14 | Supply and fixing of 50mm UPVC Column Pipes which includes all labour charges etc,.complete |
| 15 | Supply and fixing of G.I. SPECIALS AS PER IS 1239/PART II 40mm G.I union |
| 16 | Supply and fixing of G.I. SPECIALS AS PER IS 1239/PART II 40mm G.I. Bend |
| 17 | Supply and fixing of G.M GATE VALVES AS PER IS BS 5154 and related IS Specifications 40mm Gate valve |
| 18 | 90mm PVC Pipe 6 Kg/cm2 |
| 19 | Lowering PVC rigid pipes, GI Pipes specails to trench and laying to proper grade and alignment jointing with PVC couplers with cement paste and testing to the required pressure including conveyance of water for filling during testing. |
| 20 | 90mm PVC Pipe 6 Kg/cm2 |
| 21 | Refilling excavated earth after laying pipes as directed by departmental officers |
| 22 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 23 | Labour charges for the erection of submersible pump set in bore well /open well including fixing and jointing submersible cable with proper clamps up to the starter to require depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days. |
| 24 | 10.00 HP Submersible motor |
| 25 | Earth work excavation in all soils and sub-soils to a full depth as may required except hard rock requiring blasting with an initial lead and lift of 10m and 2m respectively |
| 26 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means |
| 27 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). |
| 28 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification -Mixing by manual means |
| 29 | Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2\\" x 1-1/2\\" x 1/4\\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\\" x 1/4\\" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete (SD-133) |
| 30 | Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD-65) |
| 31 | Supply and run of 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD-69) |
| 32 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender