Tender For Supply Of Electrical And Electronics Items

Sharing tender

Tender For Supply Of Electrical And Electronics Items 1 Digital Earth Tester With Range Of 2000 Ohm Lsd: 0.01 To 1Ώ Earth Resistance & 200 V Earth Voltage, Lcd Display (1999 Counts) Along With The Calibration Certificate. 2 Compact Wide-Range Dc Power Supply, Output Voltage 80V, Output Current 40A, Output Power 800W, Lan, Usb, Rs232C As Standard Interface Along With Calibration Certificate. 3 Ultra-Compact Industrial Pc- 24 V Dc Power Supply, Microsoft Windows 10 Iot Enterprise 2021 Ltsc, 64 Bit, 640 Gb M.2 Ssd, Processor 11Th Generation Intel® Core Tm I5-11500He, 2.6 Ghz Base Frequency, 6 Cores, 16 Gb Ddr4 Ram With Battery-Backed Uninterruptible Power Supply (Ups), 220 W Metal Housing For Mounting On Din Rail: Nimh (Battery) - Power Supply: 24 V Dc (-15%/+20%) - Output Voltage: 24 V Dc (Min. 23 V Dc) . 4 License-Key-Terminal (Dongle) For Twincat 3.1 License-Key-Terminal (Dongle) E.G., Tc1200-0180 5 License For Usage Of Twincat 3 Plc/Nc Ptp 10 Axes License Activated Dongle License For One Single Computer System. 6 Multitouch Built-In Control Panel With Dvi/Usb Extended Interface - 15.6-Inch Display 1366 X 768 Aluminum E6/Ev6 Housing With Glass Front, Front Side Ip 65, Rear Side Ip 20 7 Connecting Kit For Cp29Xx-0000 And Cpx29Xx-0000 Including C9900-K781 Displayport Cable, C9900-K570 Usb 3.0 Cable (3.00 M) - 3.00 M 8 Pre-Assembled Industrial Ethercat / Ethernet Patch Cable 2 X Rj45 Connector, Cat5 Sf/Utp, 4X2Xawg26, Pur, Length 1M 9 Ethercat Coupler For E-Bus-Terminal (Elxxxx) 10 Ethercat Based, Surge Filter System And Field Supply With Up To 10 A 11 Ethercat Based 16-Channel Digital Input Terminal 24 V Dc, Filter 3.0 Ms, Type 3 12 Ethercat Based 16-Channel Digital Output Terminal 24 V Dc, 0.5 A, 1-Wire System 13 Ethercat Based 8-Channel-Analog-Input Terminal 4...20 Ma, Single-Ended, 12 Bit 1-Wire System 14 Ethercat Based 2-Channel-Analog-Input Terminal 0...10 V, Single-Ended, 12 Bit 15 Ethercat Based 2-Channel Analog Input Terminal 4.20 Ma, Differential Input, 12 Bit 16 Ethercat Based 4-Channel Analog Output Terminal 0...10 V, 12-Bit, 4 X 2-Wire System 17 Ethercat Based Power Supply Terminal For E-Bus, 24 V Dc, 2 A With Diagnostics 18 Ethercat Based 4-Channel Input Terminal Pt100 (Rtd) For Resistance Sensors, 16 Bit, 2-Wire System 19 Ethercat Based 2-Channel Thermocouple Input Terminal, Preset To Type K With Wire Breakage Detection, 16 Bits 20 Bus End Cap 21 Twinsafe-Plc Ethercat-Terminal, Communications-Interface, Twinsafe, Twinsafe Logic Safety Controller For The Realization Of Safety-Related Applications Up To En 61508:2010 Sil 3, En Iso 13849-1:2015 (Cat 4, Pl E). 22 8-Channel- Safety Digital Input Terminal, 24 V Dc, Safety-Related Applications Up To En 61508:2010 Sil 3, En Iso 13849-1:2015(Cat4, Pl E) 23 4-Channel Digital Output Terminal, Twinsafe, 24 V Dc, 0.5 A, Safety-Related Applications Up To En 61508:2010 Sil 3, En Iso 13849-1:2015 (Cat 4, Pl E) 24 Power Supply Ps3000; Output: 48 V Dc / 20 A; Input: 3 Ac 380-480 V, 3-Phase 25 Ethercat Cable, 5.0M, Ip67/Ip20, Pur, Drag Chain Suitable, Awg26, M8, Plug, Angled, Male, 4-Pin, A-Coded - Rj45, Plug, Straight 26 Ethercat Cable, 2.0M, Ip67, Pur, High Flex, Awg26, M8, Plug, Angled, Male, 4-Pin - M8, Plug, Angled, Male, 4-Pin 27 7/8 Power Lead, Ip67, Pur, Socket Angled, Open End, 5-Pin, 5 X 1,5 Mm², 5.00 M 28.00 Power Distribution Box, 8-Channel, M12 L-Coded, 1 X 7/8” Input 29 Compact Integrated Servo Drive Solution Designed For Decentralized Automation Tasks. It Integrates A Synchronous Servomotor, Servo Amplifier, And Ethercat Fieldbus Interface In A Single Unit, Operating Within A 24–48 V Dc Voltage Range. The Motor Provides A Standstill Torque Of 0.78 Nm, Rated Speed Of 4500 Min⁻¹ (Rpm), And Features An F2 (58 Mm) Flange, M8 Power And M12 Communication Connectors, As Well As An Absolute Battery-Free Multi-Turn Encoder. The Integrated Sto (Safe Torque Off) Safety Function Meets Sil 3 / Pl E Requirements. 30 Integrated Servo Drive System 48 V Dc, Mo=0.7Nm, Io=8.0A, Nn=4500 Rpm Ethercat Twinsafe: Sto/Ss1, Twinsafe Logic Integrated Smooth Shaft Feedback Multi-Turn, 17Bit Encoder Without Holding Brake 31 Planetary Gearbox 2 Stage Ratio = 25 Max. Acceleration To Rque Ma = 64Nm Nominal Output Torque Mn = 40Nm Shaft With Feather Key Backlash <12 Arcmin The Compatibility Of Gearbox To The Named Motor Is Based On A Mechanically Check Only! The Combination Has To Be Verified Related To The Required Performance Data Of Application 32 Integrated Ami8122 Servo Drive Combines Servomotor, Output Stage And Fieldbus Connection In A Space-Saving Design In The Voltage Range Of < 48 V Dc. It Is Suitable For All Motion Requirements In The Power Range Up To 400 W. The Standstill Torque Of The Motor Is 0.7 Nm. The Integrated Servo Drive With Flange Code F2 (58 Mm) And Motor Length 2 Has A Shaft Diameter B = 9 K6 And A Free Shaft End Of D = 20 Mm. 33 Integrated Servo Drive System 48 V Dc, Mo=0.7Nm, Io=8.0A, Nn=4500 Rpm Ethercat Twinsafe: Sto/Ss1, Twinsafe Logic Integrated Smooth Shaft Feedback Multi-Turn, 17Bit Encoder With Holding Brake 34 Planetary Gearbox 2 Stage Ratio = 16 Max. Acceleration Torque Ma = 70Nm Nominal Output Torque Mn = 44Nm Shaft With Feather Key Backlash <12 Arcmin The Compatibility Of Gearbox To The Named Motor Is Based On A Mechanically Check Only! The Combination Has To Be Verified Related To The Required Performance Data Of Application 35 Power Cable, Pur, 5 X 1.5 Mm², Drag-Chain Suitable, M12, Plug, Straight, Male, 5-Pin, L Coded -M12, Socket, Straight, Female, 5-Pin, L Coded, 2.00 M 36 Linear Actuator Emc-080-Nn-2Om-Emc; Mechanical Component Without Motor With Following Configuration: Length Screw Assembley-496Mm, 330 Mm Maximum Travel; T5 Precision With A 23 Μm/300 Mm Tolerance, Light 3-C1 Preload, Standard Piston Rod And Housing, A 32 Mm Nominal Diameter Lead Screw With A 5 Mm Lead, Standard Lss Lubrication, No Motor Mount, No Motor Attachment, No Motor, And Two Pnp-No Switches (122). 37 Z Axis Linear Actuator Type: Vkk-100-Nn-1 Series Axis Linear Actuator (Axis)Length Screw Assembly: 276 Mm; Lead: 5.0 Mm; Maximum Speed: 0.32 M/Drive Torque Max: 12.64 Nm (Cw); Motor: (Likely None Or Separately Specified) Mounting, Feedback, Lubrication, Preload: As Per Standard For The Vkk-100 Series; Maximum Speed (Vₘₐₓ): 0.32 M/S); Drive Direction: D-Cw (Clockwise) 38 2 Hp Blowers, Helium Gas Tight Note: Helium Gas Tight Blower Are Different Operating Voltages, Blower Customization With Flp Motor; Air Filter, Air Knife, Silencer (Vibration Generated By The Pressure Pulse); Features: Die Cast Impeller, Thermal Protector Builter-In, Dust Proof Shaft Seal, Double Shielded Shaft Bearing, Improve Cooling Fan Design, Air Filter Range- 0.75 To 4 39 Variable Frequency Drive - Vfd Ambient Temp. Is-10°C To +50°C Altitude Up To 1000 M (Without Derating) Forced Air Cooling, Rs-485 Serial Port External Filters (For Emc Noise Reduction) Protection And Cooling Spec Dimensions & Weights; Option Cards & Accessories