Tender For Providing Internal Water Supply System At Sipcot Industrial Park, Sivagangai
Tender Value
2.71 Crore
Estimated cost
Bid Submission
29 Oct 2026
2 days left
EMD
1.46 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sivaganga → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Internal Water Supply System At Sipcot Industrial Park, Sivagangai
BOQ
| Sl. No. | Item Description |
| 1 | Distribution Pipe line arrangements |
| 2 | Earth Work Excavation and refilling |
| 3 | Earth work excavation other than loose soil ie. ordinary soil.SS20B and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and refilling the earth as directed by SIPCOT officers for different size of O-PVC Pipes |
| 4 | 250mm Dia PN12.5 Class |
| 5 | 200mm Dia PN12.5 Class |
| 6 | 160mm Dia PN12.5 Class |
| 7 | 110mm Dia PN12.5 Class |
| 8 | Pipe line |
| 9 | Supply and delivery of 250 mm, 200 mm, 160 mm and 110 mm dia. PN 12.5, Class 500 O-PVC pipes for water supply with socket and spigot ends, conforming to IS 16647:2017 (latest revision), suitable for Tyton joints with rubber gasket (D-jointing), supplied in standard working lengths, complete in all respects, including loading, unloading and all incidental charges, complying with the standard specifications and as directed by the SIPCOT Officers. |
| 10 | 250 mm dia OPVC PN 12.5 Pipes |
| 11 | 200 mm dia OPVC PN 12.5 Pipes |
| 12 | 160 mm dia OPVC PN 12.5 Pipes |
| 13 | 110 mm dia OPVC PN 12.5 Pipes |
| 14 | Supply & Delivery of Moulded (or) Fabricated O- PVC Fitting compatible with O- PVC Pipes including transportation to site of work. |
| 15 | 250mm dia 90 Degree Elbow |
| 16 | 250mm dia 45 Degree Elbow |
| 17 | 250mm dia 22.50 Degree Elbow |
| 18 | 250mm dia 11.25 Degree Elbow |
| 19 | 200mm dia 90 Degree Elbow |
| 20 | 200mm dia 45 Degree Elbow |
| 21 | 200mm dia 22.50 Degree Elbow |
| 22 | 200mm dia 11.25 Degree Elbow |
| 23 | 200x200 mm A/S Tee Reducer |
| 24 | 200x160 mm A/S Tee Reducer |
| 25 | 160x110 mm A/S Tee C Reducer |
| 26 | 200x160 mm D/S Reducer |
| 27 | 160x110 mm D/S Reducer |
| 28 | 160mm dia 90 Degree elbow |
| 29 | 160mm dia 45 Degree elbow |
| 30 | 160mm dia 22.50 Degree elbow |
| 31 | 110mm dia 90 Degree elbow |
| 32 | 110mm dia 45 Degree elbow |
| 33 | 110mm dia 22.50 Degree elbow |
| 34 | 200mm End Cap |
| 35 | 160mm End Cap |
| 36 | 110mm End Cap |
| 37 | Lowering O-PVC pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste. and as directed by the SIPCOT Officers. |
| 38 | 250mm Dia |
| 39 | 200mm Dia |
| 40 | 160mm Dia |
| 41 | 110mm Dia |
| 42 | Testing of OPVC pipes for water supply with hydraulic testing equipment by filling with water (including cost of water) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes. |
| 43 | 250mm Dia |
| 44 | 200mm Dia |
| 45 | 160mm Dia |
| 46 | 110mm Dia |
| 47 | Valves |
| 48 | Supply, Delivery and fixing of following sizes of Sluice valves as per standard specification including necessary pipies,specials and other joining materials etc. complete comnplying with standard specifications. CI D/F SLUICE VALVE WITH CAP/WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING |
| 49 | Sluice Valve |
| 50 | 250mm Dia |
| 51 | 200mm Dia |
| 52 | 150mm Dia |
| 53 | 100mm Dia |
| 54 | Scour Valve |
| 55 | 100mm Dia |
| 56 | 80mm Dia |
| 57 | Double Air Valve - C.I. DOUBLE AIR VALVE AS PER ISI 14845/2000 AND WITH 5 YEARS WARRANTY |
| 58 | 80mm Dia |
| 59 | 50mm Dia |
| 60 | Valve Chambers & Civil work |
| 61 | Construction of following Brick valve chambers for Sluice valves , scour Valve and DAV including cost and conveyance of all materials, labour charges including seignorage charges and as directed by the Engineer-in-charge of the work etc. complete comnplying with standard specifications |
| 62 | Sluice valves 1500x900mm |
| 63 | 250mm Dia Valuve |
| 64 | 200mm Dia Valuve |
| 65 | 150mm Dia Valuve |
| 66 | Sluice valves 1200x750mm |
| 67 | 100mm Dia Valuve |
| 68 | Scour valves 900x750mm |
| 69 | 100mm Dia Valuve |
| 70 | 80mm Dia Valuve |
| 71 | Air valve 1350 x900mm |
| 72 | For 80 mm Double Air Valve |
| 73 | Air valve 1200 x900mm |
| 74 | For 50mm Double Air Valve |
| 75 | Water Meter |
| 76 | Supply and delivery of Woltman model with removal mechanism water meters, (No domestic use) conforming to ISO 4064 part I, II, III Class B and IS-2373 with life cycle test certificate from FCRI/ NABL accredited lab. The watermeter shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointers of the meter shall be as per ISO 4064 specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates. 150mm |
| 77 | Construction of Pump room |
| 78 | Earth work excavation for foundation by manual means for RR/Brick and Other step type footings for Load bearing structures in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT officers |
| 79 | Supplying and filling in foundation, basement, etc with filling Stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT officers. |
| 80 | Cement Concrete 1:4:8 (One cement, Four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken jelly for footing,flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by SIPCOT Officers. - Mixing by Manual means |
| 81 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed by SIPCOT Officers |
| 82 | For Below Plinth surfaces |
| 83 | For Above Plinth surfaces :Beam,Slab and Lintel |
| 84 | For Below Plinth surfaces : Square column ,Rec Column |
| 85 | For Above Plinth Surface |
| 86 | Supply, fabricating and placing in position mild steel or ribbed tor steel bars high strength deformed bars like RTS bars for reinforcement for all reinforced cement concrete works including cost and conveyance of steel, binding wire to work site, cost of fabrication, labour charges for cleaning the rods, straightening, cutting, bending, tying grills, hoisting and placing the reinforcement in position before concreting, cost of binding wire, provision of space bars, cover blocks and all other incidental charges etc., Complete as per standard specification and as directed by SIPCOT Officers. |
| 87 | Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and 10-1 nu down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials)Complete and as directed by SIPCOT officers |
| 88 | In Foundation and Basement |
| 89 | Above G.L. ( Ground floor) |
| 90 | Brick work in CM 1: 5 using best quality of second class ground moulded chamber burnt bricks of size 9\\"x 4 3/8\\"x 2 3/4\\" including cost and conveyance of all required materilas at site and all labour charges etc., complete. |
| 91 | For basement |
| 92 | For Ground floor |
| 93 | Plastering with cement mortar 1:5 (one cement and five p.sand), 12 mm thick for all wall surfaces neatly finishing to line including cost and conveyance of all required materilas at site and all labour charges, proper curing etc., complete complying with standard specifications and as directed by SIPCOT officers. |
| 94 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used, hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers. |
| 95 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement the size of outer frame type (open) from the profile 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 96 | UPVC Window - 1.50m x 1.20m |
| 97 | Supplying and erecting manually operated pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheets. The shutter shall be painted with red oxide primer and rate inclusive of hood covers, transportation charges etc., complete complying with standard specification and as directed by SIPCOT officers. (size is 2.40mx2.40m) |
| 98 | For Rolling Shutter |
| 99 | Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.as directed by SIPCOT officers. |
| 100 | Painting two coats of newly plastered wall surface with ready mixed exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers. |
| 101 | Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRL copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TWswitch box and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil) - SD 17 |
| 102 | For Light Points |
| 103 | For fan Points |
| 104 | Supply and fixing of 3 Nos.5A (3 pin and 2pin )combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) |
| 105 | For 5A switch/Socket Points |
| 106 | Supply and fixing of single box type 4' 36 W flu. Fitting complete with electronic ballest with TW round blocks on wall or ceiling with flu. Tube with PVC unsheathed copper leads from terminals to the fitting and as directed by SIPCOT Officers. |
| 107 | Painting the SIPCOT Emblum and writing the slogon in accordance with size and specification as approved by SIPCOT Officer with approved colour and quality of paint on exterior surface of Service Reservoir etc., complete and as directed by SIPCOT Offciers. |
| 108 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 109 | Finishing the top of roof with one course of machine pressed tiles of following size of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 110 | Supply, Erection, Testing and Commissioning of 2 Nos. Horizontal Centrifugal Pump Sets (50 LPS, 35 m Head, 30 HP) with allied Civil, Mechanical and Electrical Works. |
| 111 | Civil works |
| 112 | Supplying and erecting steel centering for sides and soffits including supports and strutting for all concrete works in all floors using mild steel BG 10 sheets of size 90 cm x 60 cm stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10 cm to 13cm dia spaced at 75cm centre to centre etc., complete complying with standard specification and as directed by SIPCOT officers. Below plinth Plane surfaces |
| 113 | Supply, fabricating and placing in position mild steel or ribbed tor steel bars high strength deformed bars like RTS bars for reinforcement for all reinforced cement concrete works including cost and conveyance of steel, binding wire to work site, cost of fabrication, labour charges for cleaning the rods, straightening, cutting, bending, tying grills, hoisting and placing the reinforcement in position before concreting, cost of binding wire, provision of space bars, cover blocks and all other incidental charges etc., complete complying with standard specification and as directed by SIPCOT officers. |
| 114 | Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (In foundation basement) |
| 115 | Providing and fixing M24 × 600 mm foundation bolts with nuts, washers and templates for pump base frame etc., complete complying with standard specification and as directed by SIPCOT officers. |
| 116 | Mechanical works |
| 117 | Supply and delivery of Horizontal split casing centrifugal pump conforming to IS 1520 and as amended thereafter with CI casing and split glands, stainless steel shaft, hydraulically and dynamically balanced bronze impellers capable of discharging required quantity of water against a total head noted below due to all causes and with the accessories such as G.M air release cock, Grease cup, G.I priming funnel, M.S lifting hook, drip water G.I pipe connections, leading to the outside of pump house rubber water deflector, double flap foot valve, G.M strainer including unique tyre type coupling, common M.S fabricated base to mount pump and motor and other standard fittings etc complete. Pump shall be capable of discharging the specified quantity at the head noted at the minimum NPSH at site conditions. The shut off head shall be atleast 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase, 415 V, 50 Hz, 1500 RPM. |
| 118 | Unique code - WD -MI1813 /3000 of Head 35m |
| 119 | Supply and delivery of AC three Phase 4 pole Horizontal squirrel cage Induction motor confirming to IS 325/1996 and as amended thereafter with Class F insulation to suit the speed of pump and suitable for operation with continuous S1 rated, 415 V +/- 10 %, 50 HZ +/- 5%, TEFC (upto 20 HP), SPDP (above 20 HP). The motor offered should be of energy efficient motors. |
| 120 | 30 HP, 415 V, IE3 Induction Motor TEFC, 3 Phase |
| 121 | Flexible pin-bush/tyre type coupling suitable for 30 HP motor and pump, complete with two hubs, rubber bushes/tyre element, keys, bolts, nuts, and 3 mm thick MS coupling guard, including erection, alignment and commissioning charges etc., complete complying with standard specification and as directed by SIPCOT officers. |
| 122 | Providing, fabricating, supplying, painting, erecting and fixing heavy-duty Mild Steel base frame fabricated from IS 2062 structural steel channels and plates, suitable for mounting one 50 LPS horizontal centrifugal pump and one 30 HP, 415 V induction motor. The base frame shall be adequately designed to withstand static and dynamic loads without vibration and shall include cross members, stiffeners, machined mounting pads, slotted holes for alignment, foundation bolt holes, lifting lugs, and anti-vibration mounting pads wherever required. The frame shall be cleaned, one coat of red oxide zinc chromate primer applied followed by two coats of synthetic enamel paint. The item shall include all welding, drilling, grinding, nuts, bolts, washers, erection, alignment and fixing complete as per manufacturer's drawing and Engineer-in-Charge's approval. Approximate overall size: 2000 mm × 800 mm × 250 mm. Approximate fabricated weight: 180–220 kg. charges etc., complete complying with standard specification and as directed by SIPCOT officers. |
| 123 | Labour Charges for erection of Horizontal shaft, centrifugal pumpset (Coupled/ Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days includingsigning of completion of reports as required by EB authorities. |
| 124 | Above 30 HP to 40 HP |
| 125 | Suction System |
| 126 | Providing, laying, jointing and testing 150 mm dia DI K9/sacket /Spigot pipe as per IS 8329 including flanges, gaskets, nuts, bolts, cutting, welding, supports and painting complete |
| 127 | Supplying and fixing 150 mm dia resilient seated butterfly valve, PN 1.6, CI body, SS disc and shaft, EPDM/NBR seat, gear operated, with companion flanges, nuts, bolts and gaskets complete. |
| 128 | Fabricating and supplying 150 mm × 125 mm MS eccentric reducer, 6 mm thick, flanged at both ends, shop fabricated, painted and erected complete. |
| 129 | Providing 150 mm dia EPDM/NBR rubber expansion joint, flanged type with MS backing flanges, suitable for vibration isolation and thermal movement, complete. |
| 130 | Providing and fixing 150 mm dia flanged Y-type strainer, CI body with SS304 perforated screen, suitable for pump suction, complete with drain plug and gaskets. |
| 131 | Fabricating and fixing MS pipe supports, clamps, anchor fasteners, inserts and structural members including primer and two coats of enamel paint. |
| 132 | Delivery Pipe Works |
| 133 | DI/MS Delivery Pipe - Providing, laying, jointing and testing 150 mm dia DI K9/MS Class-B flanged delivery pipeline, including flanges, rubber gaskets, nuts, bolts, welding, cutting, supporting, painting and hydraulic testing complete |
| 134 | Non-return Valve - Supplying and fixing 150 mm dia double flanged swing check Non-Return Valve, PN 1.6, cast iron body with stainless steel hinge pin and renewable bronze seat, complete with companion flanges, nuts, bolts, gaskets, erection and testing |
| 135 | Butterfly Valve - Supplying and fixing 150 mm dia resilient seated butterfly valve, PN 1.6, CI body, SS316 disc and shaft, EPDM seat, gear operated, complete with companion flanges, nuts, bolts, gaskets, erection and testing. |
| 136 | Electromagnetic Flow Meter - Supplying, installing, testing and commissioning 150 mm dia electromagnetic flow meter, accuracy ±0.5%, IP68 sensor, remote digital indicator, PTFE lining, SS316 electrodes, complete with cables, calibration certificate and mounting accessories with warrenty. |
| 137 | Pressure Gauge 0–6 kg/cm² - Providing glycerine-filled 100 mm dial pressure gauge, range 0–6 kg/cm², SS bourdon tube with gunmetal isolating cock, siphon tube and mounting accessories, complete. |
| 138 | Kinetic Air Release Valve 50 mm dia - Supplying and fixing 50 mm dia double orifice air release valve, CI body, SS float mechanism, complete with isolation valve, flanges, bolts and gaskets with 5 years warrenty. |
| 139 | Pipe Specials - Fabricating and fixing MS bends, tees, reducers, puddle flanges, companion flanges, bolts, nuts, rubber gaskets and other specials, including welding, drilling, painting and testing complete. |
| 140 | Pipe Supports & Clamps - Fabricating and fixing heavy-duty MS pipe supports, saddles, anchor clamps and structural supports, complete with foundation bolts, primer and two coats of enamel paint. |
| 141 | Electrical works |
| 142 | Floor Mounted MCC Control PanelProviding, supplying, erecting, testing and commissioning floor-mounted, cubicle type MCC panel fabricated from 2.0 mm CRCA sheet, powder-coated, IP54 protection, complete with 160 A MCCB incomer, copper busbars, digital voltmeter, ammeter, selector switches, CTs, indicating lamps, control transformer, space heater, cable alleys, internal wiring and earthing terminals, suitable for operating 2 Nos. 30 HP pump motors (1W+1S). |
| 143 | Automatic Star-Delta StarterProviding and fixing Automatic Star-Delta Starter suitable for 30 HP, 415 V, 3-phase motor, complete with MCCB, contactors, timer, overload relay, push buttons, indication lamps and all control wiring. WDM 1944 |
| 144 | Power CableProviding, laying, testing and commissioning 4 Core × 25 sq.mm XLPE insulated, PVC sheathed, armoured Aluminium cable (1100 V grade) in trench/cable tray including excavation, sand cushioning, protective bricks, warning tape, termination with glands and lugs. |
| 145 | Cable Tray Providing and fixing GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height |
| 146 | Earthing ElectrodeProviding 40 mm dia × 3.0 m long GI pipe earthing complete with charcoal, salt, masonry inspection chamber, CI cover, watering arrangement and GI earth lead as per IS 3043. |
| 147 | GI Earthing StripProviding and fixing 25 mm × 6 mm GI earth strip including clamps, saddles, welding, painting and connection to all electrical equipment. |
| 148 | Cable Glands & Lugs for 4C X 25mm2 Supplying and fixing double compression brass glands, aluminium/copper lugs, ferrules, heat shrink sleeves and complete cable termination accessories. |
| 149 | Motor Junction Box Connections Providing all internal wiring from control panel to motor terminals using copper control cable including PVC conduit, glands, lugs and accessories |
| 150 | Testing & Commissioning - Testing of insulation resistance, continuity, phase sequence, earth resistance, starter operation, protection settings, no-load and full-load trial run of the complete electrical installation. |
| 151 | Testing & Commissioning |
| 152 | Testing, commissioning and performance testing of the complete pumping system comprising 2 Nos. Horizontal Centrifugal Pumps (50 LPS × 35 m Head, 30 HP, 1 Working + 1 Standby), including checking of pump alignment, motor rotation, coupling alignment, suction and delivery pipelines, valves, flow meter, pressure gauges, electrical control panel, starters, power cables, earthing system, insulation resistance test, earth resistance test, hydrostatic testing of pipelines, no-load trial, full-load trial, performance test at the rated discharge and head, vibration and noise level checks, leakage rectification, submission of test certificates, and handing over the system in satisfactory working condition, complete as directed by the Engineer-in-Charge. |
| 153 | Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate) |
| 154 | Added GST of 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender