Tender For Provision Of Cooling Appliances, Cable Tray & Cable Tray Cover For Layout Of Cable In Radar, Power Plant & Signal At 257 Su Of 17 Fbsu Af & Special Repairs/Replacement Of Ber Cooling Appliances At Hq Sac(U)
Tender Value
37.82 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
17 days left
EMD
75640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Cooling Appliances, Cable Tray & Cable Tray Cover For Layout Of Cable In Radar, Power Plant & Signal At 257 Su Of 17 Fbsu Af & Special Repairs/Replacement Of Ber Cooling Appliances At Hq Sac(U)
BOQ
| Sl. No. | Item Description |
| 1 | Provision of Cooling appliances in certain locations at 257 SU |
| 2 | M&L for submain wiring in PVC conduit with two runs of 4 Sq mm and one run of 4 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded drawn through and including 25 mm dia PVC rigid conduit including accessories such as bends, supports etc all as specified and directed |
| 3 | M&L for submain wiring in PVC conduit with two runs of 2.5 Sq mm and one run of 2.5 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded drawn through and including 25 mm dia PVC rigid conduit including accessories such as bends, supports etc all as specified and directed |
| 4 | S&F in repairs for 20 Amp miniature circuit breaker SPN rating 240V, 10KA 'C' in the MCB existing DB complete with connection testing and commissioning all as specified and directed |
| 5 | M& L for AC box modular socket type with MCB SP 20 amps 10 KA operating on 240 volts AC all as specified and directed. Make : Havells 25 A DBOXX MCB Socket, DHDMCSN0251025 or Equivalent |
| 6 | Supply and install testing, commissioning of Split AC with inverter type, Variable speed compressor which adjusts power depending on heat load, convertible/adjustable with 6-in-1 multi-mode operation through remote control to operate in different tonnages for different cooling needs, comprising of indoor unit with dust Filter, Anti-bacterial Filter & outdoor unit with Copper Condenser Coil, single phase 230V, 50Hz complete with cordless remote control unit of high EER rated BLDC compressor, including inter connection cable of suitable size, necessary fixing arrangement complete unit shall be placed at suitable position and height inside the room and outdoor unit at suitable place outside the room on plinth height / on wall or roof as suitable and metallic bracket with fixing bolts for outdoor unit, insulated copper piping etc., Refrigerant R410-A/R32 of capacity 1.5TR (copper type) 5-star rated complete all as specified and directed.Note: 1 Year Comprehensive Warranty on the Product, 10 Years on Compressor & 5 years PCB Warranty.The 6-in-1 multi-mode operation typically includes features like:- Auto mode- Cooling mode- Dehumidify mode- Fan mode- Turbo mode- Sleep modeTo facilitates greater flexibility and energy efficiency. |
| 7 | Supply and install testing, commissioning of Split AC with inverter type, Variable speed compressor which adjusts power depending on heat load, convertible/adjustable with 6-in-1 multi-mode operation through remote control to operate in different tonnages for different cooling needs, comprising of indoor unit with dust Filter, Anti-bacterial Filter & outdoor unit with Copper Condenser Coil, single phase 230V, 50Hz complete with cordless remote control unit of high EER rated BLDC compressor, including inter connection cable of suitable size, necessary fixing arrangement complete unit shall be placed at suitable position and height inside the room and outdoor unit at suitable place outside the room on plinth height / on wall or roof as suitable metallic bracket with fixing bolts for outdoor unit, insulated copper piping etc., Refrigerant R410-A/R32 of capacity 2.0TR (copper type) 5-star rated complete all as specified and directed.Note: 1 Year Comprehensive Warranty on the Product and 10 Years on Compressor.The 6-in-1 multi-mode operation typically includes features like:- Auto mode- Cooling mode- Dehumidify mode- Fan mode- Turbo mode- Sleep modeTo facilitates greater flexibility and energy efficiency.Note :All Air conditioning units shall be installed exclusively by authorized company personnel, and the contractor shall facilitate the installation process. |
| 8 | Supply, installation, testing and commissioning of 5 kVA voltage stabilizer suitable for 1.5 & 2 Ton AC, microprocessor controlled, with digital display, copper wound transformer, wide input range, and protections (high/low voltage, overload, surge, thermal, time delay), including wiring, earthing, mounting and accessories, complete all as specified and directed. make V-Guard / Havells or equivalent. |
| 9 | Supply and fixing of GI bracket stand suitable for 1.5 Ton, 2.0 Ton, 3 Ton and 4 Ton air conditioner outdoor units, fabricated from heavy duty GI steel, powder coated for corrosion resistance, of adequate load bearing capacity, complete with nuts, bolts, anchor fasteners and mounting hardware, including proper alignment and drilling for firm and stable installation of outdoor unit, with all accessories and minor works, complete all as specified and directed |
| 10 | S & F Digital timer for AC, Programmable 24-hr clock, allows for automatic on/off switching of 2-AC unit at present times, enhancing energy efficiency and convenience complete all as specified and directed . Make : L&T/SIEMENS/CARRIER |
| 11 | PROVN OF CABLE TRAY & CABLE TRAY COVER FOR LAYOUT OF CABLE IN RADAR, POWER PLANT & SIGNAL AT 257 SU OF 17 FBSU AF |
| 12 | Supply, installation and fixing of 375 mm wide × 62.5 mm deep × 2.0 mm thick Stainless Steel (SS) perforated cable tray, complete with SS covers/lids, bends, offsets, tees, reducers, clamps, brackets, supports and all other accessories required for complete installation. The cable tray shall be securely mounted/fixed along the required route, including on walls, hard rock, hard dense soil or other site conditions, as applicable, using suitable approved fixing/support arrangements strictly in accordance with the AF Signal cable-route requirements, approved drawings/layout and site conditions complete all as specified and directed. Note : All materials, supports, fixing arrangements, drilling/excavation, anchoring, cutting, fabrication, installation, alignment, levelling, finishing,, tackles and all other incidental works required for complete and satisfactory execution shall be deemed included in the quoted item rate. Bolts, nuts and washers covered under Item Nos. 3 and 4 shall be measured and paid separately. The contractor shall strictly comply with the User's requirements, approved specifications/drawings and directions of the Engineer-in-Charge. Make/Manufacturer: Legrand / OBO Betterment / Schneider Electric / equivalent approved make by CAM , subject to availability of the specified size and technical compliance complete all as specified and directed. |
| 13 | Supply, installation, testing and commissioning of Stainless steel Cable Cover of size 380 mm wide × 62.5 mm deep, suitable for the 375 mm wide SS perforated cable tray specified under Item No. 1, complete with necessary cover clamps/clips and all accessories required for proper fitting and securing of the cover. The cover shall be properly aligned and securely fixed throughout the cable tray route, including all cutting, adjustment, labour, tools, tackles and incidental works required for complete installation. All materials and fixing arrangements required for satisfactory completion shall be deemed included in the quoted item rate complete all as specified and directed.. Make/Manufacturer: Legrand / OBO Betterment / Schneider Electric / equivalent approved make by CAM , subject to availability of the specified size and technical compliance complete all as specified and directed. |
| 14 | Supply and fixing of 8 mm diameter × 20 mm long Hot Dip Galvanized (GI) Hex Head Nut, Bolt and Washer set, complete with all accessories, for joining cable tray sections, covers, coupler plates and supporting accessories as required complete all as specified and directed. |
| 15 | Supply and fixing of Stainless Steel (SS) Coupler Plate suitable for 375 mm wide stainless steel perforated cable tray, complete with SS nuts, bolts and washers for joining tray sections and ensuring mechanical strength and continuity complete all as specified and directed. |
| 16 | Supply, fabrication and erection of Y-shaped elevated cable tray holders/supports, fabricated from MS angle, channel and flat of suitable approved size, designed to adequately support the fully loaded stainless steel perforated cable trays, including cutting, bending, welding, drilling and fixing in position with suitable approved anchor fasteners, nuts, bolts and washers. Supports shall be provided at a maximum spacing of 2.0 m centre-to-centre, or as per approved layout, ensuring proper height, alignment and rigidity. The supports shall be provided with suitable anti-corrosive primer and camouflage finish painting, complete with all materials, labour, fasteners and accessories required for proper installation and completion in all respects. Cable tray coupler plates, nuts, bolts and washers for joining tray sections shall be measured and paid separately under Item No. 15 complete all as specified and directed. |
| 17 | Special Repairs/Replacement of BER cooling appliances at HQ SAC(U) |
| 18 | M&L for submain wiring in PVC conduit with four runs of 6 Sq mm and one run of 6 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI Marked(IS 694) drawn through and including 25 mm dia PVC rigid conduit including accessories concealed in wall / celling as bends, supports etc incl taking down unserviceable submain wiring and complete all as specified and directed. Note - Job including cutting / chasing of Exiting wall and making good the disturbed surface and painting to match the existing surface/ wall. |
| 19 | M&L for submain wiring in PVC conduit with four runs of 10 Sq mm and one run of 10 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI Marked(IS 694) drawn through and including 25 mm dia PVC rigid conduit including accessories concealed in wall / celling as bends, supports etc incl taking down unserviceable submain wiring complete all as specified and directed. Note -Job including cutting / chasing of Exiting wall and making good the disturbed surface and painting to match the existing surface/ wall. |
| 20 | Supply & Fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN of 32A current carrying capacity in the complete in existing DB complete with connecting testing and commissioning complete all as specified and directed. |
| 21 | Disconnecting all electric connection carefully with safety measures, taking down old Unserviceable AC, Water cooler , Deep freezer, voltage stabilizer of any capacity in any location of unit fitted on any height from the bldg and deposit to MES store complete all as specified and directed. |
| 22 | Taking down unserviceable submain wiring and M&L for submain wiring in PVC conduit with two runs of 4 Sq mm and one run of 4 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded drawn through and including 25 mm dia PVC rigid conduit including accessories concealed in wall / celling such as bends, supports etc complete all as specified and directed. |
| 23 | Taking down unserviceable submain wiring and M&L for submain wiring in PVC conduit with two runs of 2.5 Sq mm and one run of 2.5 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded drawn through and including 25 mm dia PVC rigid conduit including accessories concealed in wall / celling as bends, supports etc complete all as specified and directed. |
| 24 | M& L for AC box modular socket type with MCB TPN 32 amps 10 KA operating on 440 volts AC complete all as specified and directed. |
| 25 | Supply, installation, testing and commissioning of 3 Ton capacity inverter type high wall split air conditioner (mega split), suitable for 3-phase, 415V, 50Hz AC supply for outdoor unit and single-phase, 230V, 50Hz supply for indoor unit, complete with indoor and outdoor units, having DC inverter technology for energy efficient operation, high ambient working capability, self-clean function, and wide angle air flow with long air throw, complete with all standard features. Including necessary copper refrigerant piping with insulation, drain piping, interconnecting control cabling, earthing, vibration isolators, cutting/drilling and making good of walls/floors, complete all as specified and directed.The unit shall be suitable for uniform cooling of large spaces and capable of continuous operation under site conditions complete all as specified and directed. Note : Only BEE higher star rated models (latest available in market at the time of supply) shall be provided. |
| 26 | Supply, installation, testing and commissioning of 4 Ton capacity inverter type floor standing (Tower air conditioner, suitable for 3-phase, 415V, 50Hz AC supply, complete with indoor and outdoor units, having Smart DC Inverter Technology for energy saving, self-clean technology for improved air quality, and 3D air flow with wide angle air circulation, complete with all standard features. Including necessary copper refrigerant piping with insulation, drain piping, control cabling, earthing, vibration isolators, cutting/drilling and making good of walls/floors, complete as required. The unit shall be suitable for uniform cooling of large spaces and continuous operation under site conditions, with high reliability for operation in high ambient temperatures complete all as specified and directed. |
| 27 | Supply and fixing of GI bracket stand suitable for 1.5 Ton, 2.0 Ton, air conditioner outdoor units, fabricated from heavy duty GI steel, powder coated for corrosion resistance, of adequate load bearing capacity, complete with nuts, bolts, anchor fasteners and mounting hardware, including proper alignment and drilling for firm and stable installation of outdoor unit, with all accessories and minor works, complete all as specified and directed. |
| 28 | Supply and fixing of GI bracket stand suitable for 3 Ton air conditioner outdoor units, fabricated from heavy duty GI steel, powder coated for corrosion resistance, of adequate load bearing capacity, complete with nuts, bolts, anchor fasteners and mounting hardware, including proper alignment and drilling for firm and stable installation of outdoor unit, with all accessories and minor works, complete all as specified and directed. |
| 29 | Supply and fixing of GI bracket stand suitable for 4 Ton air conditioner outdoor units, fabricated from heavy duty GI steel, powder coated for corrosion resistance, of adequate load bearing capacity, complete with nuts, bolts, anchor fasteners and mounting hardware, including proper alignment and drilling for firm and stable installation of outdoor unit, with all accessories and minor works, complete all as specified and directed. |
| 30 | Supply and install testing, commissioning of water cooler with water purifier of capacity 60/120 ltr SS 304 tank, water flow rate 200ltr/hrs, Hot, Cold, Normal water, heater capacity 1000watts Energy efficient (Maximum star rating available in market) single door, 240 volts AC complete all as specified and directed.Make; Voltas/ Blue Star or any CAAM |
| 31 | Supply and install testing, commissioning of a 205L Deep freezer, BEE 5-star rated, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender