Tender For Provn Of Inner Perimeter Fencing Alongwith Angle Pillars Of Length Approx 800 Mtrs At Cod Agra Under Ge (West) Agra
Tender Value
23.92 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
20 days left
EMD
47840
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Inner Perimeter Fencing Alongwith Angle Pillars Of Length Approx 800 Mtrs At Cod Agra Under Ge (West) Agra
BOQ
| Sl. No. | Item Description |
| 1 | M&L surface dressing n exc 15 cm deep soft/loose soil all as specified and directed. |
| 2 | Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as per specified and directed by Engineer -in-charge. |
| 3 | S&F mild steel Joist, channel, angle , or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) FE 290 Gde 165 complete all as per specified and directed by Engineer -in-charge. |
| 4 | M&L Cement concrete Type C2 1:3:6 in foundations, filling and mass-concrete complete all as per specified and directed by Engineer -in-charge. |
| 5 | Supply of chain link MS galvanised fencing 3.00mm dia size of mesh 50X50mm including straining bolt,bar and binding wire. complete all as per specified and directed by Engineer -in-charge. |
| 6 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as per specified and directed by Engineer -in-charge. |
| 7 | M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of neck 11 to 15mm. complete all as per specified and directed by Engineer -in-charge. |
| 8 | Supply and fix Mild steel round bar 10MM dia, in available lengths to strengthening chain link fencing including two coat of synthetic enamel paint over a coat of red oxide complete all as per specified and directed by Engineer -in-charge. |
| 9 | Supply and fix Mild steel in flat Fe-410-W(Gde-E-250)quality-A, in available lengths to strengthening chan link fencing. complete all as per specified and directed by Engineer -in-charge. |
| 10 | Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed. |
| 11 | S & F Galvanised 2 strand, steel barbed wire 2.24mm dia at 75mm spacings and training and fixing to any type of standard rails training bolts, including, securing or tying at crossings with and provision of galvanised mills steel wire, staples or steel pins, etc. as direcdted ( each line wire to be measured). |
| 12 | M&L excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil as in foundation. |
| 13 | Returning filling in trenches in layers n. exc 25cm thick, watering, well ramming complete in soft/loose soil |
| 14 | Removing excavated material n. exc 50m and depositing where directed at level n. exc 1.50mm in soft loose soil. |
| 15 | M&LCement concrete Type D2 1:4:8 in foundations, filling and mass-concrete complete all as per specified and directed by Engineer -in-charge. |
| 16 | M&L for brick work with sub class 'B' old size brick built in CM 1:6 straight or curved on plan exc 6m mean radius complete all as specified and directed. |
| 17 | M&L for 15mm thick rendering in CM 1:4 on other then fair faces of brick work finished even and smooth surface complete all as specified and directed. |
| 18 | M&L for preparation of new surfaces of wall and applying two coat of cement base paint complete all as specified and directed |
| 19 | M&L Cement concrete Type B1 1:2:4 using 20mm graded stone aggregate as in coping including necessary formwork complete all as per specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender