Tender For External/Internal Painting/Improvement To Cantt. Fund Buildings In Cantt. Area.
Tender Value
48.14 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
6 days left
EMD
97000
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for External/Internal Painting/Improvement To Cantt. Fund Buildings In Cantt. Area.
BOQ
| Sl. No. | Item Description |
| 1 | M/L PC Plaster in cement Mortar 1:4,12 mm thick finished even and smooth (without using extra cement) on walls all as sp. |
| 2 | Ditto, but PC Plaster in cement Mortar 1:4, 12 mm thick finished even and smooth including water proof compound all as sp. |
| 3 | M/L Putty two coats grinding plaster surface with sand paper, putty filling again grinding to even smooth surface and one coat of primer followed by two coats of premium Acrylic emulsion such as Asian/nerolac/Berger or equivalent to smooth interior finish all as sp.(on ceiling/walls) |
| 4 | M/L Putty two coats grinding plaster surface with sand paper, putty filling again grinding to even smooth surface and one coat of primer followed by super fine roller coat finish of spectrum or equivalent to be applied with foam Roller, Finally coated with two coat premium exterior emulsion/Apex or equivalent all as sp. |
| 5 | M/L Putty two coats grinding plaster surface with sand paper, putty filling again grinding to even smooth surface and one coat of Exterior Water Based Primer followed by textured finish with Trowel natural stone finish from spectrum or equivalent acrylic plaster with grains-Application of one coat of natural stone finish upto 1.5 to 2mm thick with trowel followed by transparent silicon to make surface water repellent all as sp. |
| 6 | Removing of old paint on ceiling/Walls then one coat of waterproof with chemical compound/putty on ceiling/wall complete all as sp. |
| 7 | Heritage Granule finish/Rustic Finish- Application of one coat of quartz primer of spectrum or equivalent and application of granules of desired shade with trowel and top coat of transparent silicon to make surface water repellent all as sp. (including scaffolding) |
| 8 | Metallic Finish-Application of one coat of primer followed designer roller finish of desired design followed by two coats of luxury interior/exterior emulsion and finally one coat of metallic emulsion Nerolac/Asian or equivalent all as sp. |
| 9 | M/L Putty two coats followed by primer one coat followed by painting two coats with exterior emulsion + graphics painting under Swachh Bharat Abhiyan, AKAM etc. |
| 10 | Ditto but the with scaffold upto 20' height from road level. |
| 11 | M/L grinding wooden Surface with sand paper 60 no. Filling with wood filler then grinding with 80 no. Sand paper, then again filling wood Filler then grindng with send paper 100 nos. Then wood Filler with stainer and grinding with 150 nos. Sand paper filing, then malamine coat, grinding with sand paper no. 320. one coat of lacquer then final coat of malamine on designer door exc. 1.25 sqm and not exc. 2 sqm. |
| 12 | Ditto, But on Plain door exc. 1.25 sqm and not exc. 2 sqm. |
| 13 | Ditto, But chowkhats single rebated or double rebated all as specified. |
| 14 | Removing of old paint, propering surface with one coat of putty grinding to smooth surface and applying two coat of Apex paint or equivalent with super fine roller coat finish of specialized or equivalent on old surface. |
| 15 | Providing and laying autoclaved aerated cement blocks masonry with 150 mm/230 mm/300 mm thick AAC Blocks in supersturcture above plinth level upto floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-charge. (The payment of RCC band and reinforcement shall be made for separately.) |
| 16 | Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of Foundation and Plinth Beams and similar work; vertical or to batter fair finished surface all as sp. in DSR 2023. |
| 17 | Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, Columns, beams, landings and similar work, not exceeding 200mm thick (Horizontal or sloping)fair finished surface all as sp. in DSR 2023. |
| 18 | M/L RCC work 1:1½ :3 for foundation including raft footing foundation beams plinths beams bases for columns basement slabs under reamed piles and mass concrete and the like all as specified in DSR 2023.. Note : Only OPC cement will be used for all RCC works. |
| 19 | M/L RCC work 1:1½:3 for slabs supported on walls, columns , roofs, landing, balconies, canopies deck slabs and in shelves and the like all as specified in DSR 2023. Note : Only OPC cement will be used for all RCC works. |
| 20 | S/F Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all specified in DSR 2023. |
| 21 | S/F framed work such as grills, grating, cattle traps etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters, trusses purlins, MS bar fencing, walk wais; railings; frame work of water tanks and similar work confirming to Fe 410-0 or Fe 310-0 all as specified in DSR 2023. |
| 22 | Supply and fixing of pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified in DSR 2023. |
| 23 | Lift: Supply, installation, Testing and commissioning of 6 passenger lift (408 Kgs or more) lifts having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specification enclosed and as under:- Type of Machine-Machine Room Less Type of lift 6 passenger, Stainless Steel Load : 408 Kgs Speed : 1.0 m/s Floors : 3 (G+2 Upper Floors) - 10 meter (approx) Stops & Openings:3 Stops (0,1,2) as per site requirement Controller - A.C. Variable Voltage & Variable frequency (VVVF) Automatic rescue device with dry maintenance free battery of required capacity. Power 400/440 Volts + 10%, 3 Phase/Single Phase, 50 Hz, 4 wires system AC. Car : Power Operated - Centre opening glass doors with Stainless Steel frame. (Make : KONE/JOHNSON/OTIS/SCHINDLER or EQUIVALENT) |
| 24 | The other works to be carried out shall be payable as per DSR Schedule of rate all as specified in DSR 2023. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender