Tender For Repairs To Footpath, Fencing.Kerb Stones, Boundary Wall And Other Allied Works For Otm Area Under Aor Of Age B/R-I Under Ge (West) Agra
Tender Value
35 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
4 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Footpath, Fencing.Kerb Stones, Boundary Wall And Other Allied Works For Otm Area Under Aor Of Age B/R-I Under Ge (West) Agra
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and debrish removed from site and through on low laying area complete all as specified and directed. |
| 3 | M&L for 75mm thick plain cement concrete (1:4:8) type D2 using 40mm graded aggregates as in path, hard standing complete all as specified and directed. |
| 4 | M&L for Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) etc and similar work all as specified and directed. |
| 5 | M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed in neat cement slurry and pointed in gray cement and neat cement to match the colour of tile laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed. |
| 6 | M & L Machine pressed 60 mm thick precast concrete interlocking paver block ( Colour) any shape and size confirming to IS 15658-2006, M35 Grade laid over 30mm thick sand cusion all as specified and directed. |
| 7 | M & L Machine pressed 80mm thick precast concrete interlocking paver block ( Colour) any shape and size confirming to IS 15658-2006, M 40 grade laid over 50mm thick sand cusion all as specified and directed. |
| 8 | M & L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with premix cement mortar, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including taking down complete all as directed by Engineer-In-Charge. |
| 9 | M&L for preparation of stone surfaces new of any description over 10cm in girth or width & applying two coat of synthetic enamel paint over and including a coat of primer complete all as directed. |
| 10 | M&L for preparation of stone old surfaces of any description over 10cm in girth or width & applying one coat of synthetic enamel paint complete all as directed. |
| 11 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in 1:4 cement mortar including Demolation of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified & directed |
| 12 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in cement mortar but except brick complete all as specified & directed (Note- Old brick will be reuse wihich are obtained from item no 11 of BOQ) |
| 13 | M&L for 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over interior surface of wall complete all as specified and directed. |
| 14 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 15 | Taking down cement or cemant lime plaster of any discription on bricks or stone walls etc including racking out joints, hacking for key, scrubbing down with water and including M&L for 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over exterior surface of wall, M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr -In-Charge. |
| 16 | M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm premix cement plaster furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm premix cement plaster (1 premix cement : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately). |
| 17 | M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove and finished with appvoved weather paint including filled epoxy sealant in grooves as directed complete as per specifications and direction of the Engineer-in-charge |
| 18 | S & F for 2mm thick Acrylic LED light Sign/Display board consisting of following.(i) 45mm dia MS square hollow pipe for framing embeded in cement concrete and making good.(ii) 0.5mm thick prepainted coloured galvanised steel sheet for cladding (colour approved by Engr-in-Charge). (iii) Lettrs/Symbol made up of 2.5mm thick acrylic sheet of appropriate size, colour and design as approved by GE.(nos of lettrs as per requirement of site)(iv) LED lights for Lettrs/Symbol of desired capacity and colour as approved by GE.Note : (a) Length x Height of board for 100mm wide will be decided by GE.(b) All kind of required electric work like wiring, tapping, etc upto plug point included. (c) Two coat of synthetic enamal paint over a coat of primer for all Mild Steel work included. |
| 19 | Dismantling steel work including doors, gates and post of any description not otherwise provided all as per specified and directed. |
| 20 | Dismantling fencing wire mesh, any type all as per specified and directed by Engineer -in-charge.. |
| 21 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground all as per specified and directed by Engineer -in-charge.. |
| 22 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as per specified and directed. |
| 23 | M&L Cement concrete Type B2 1:2:4 in foundations, filling and mass-concrete complete all as per specified and directed by Engineer -in-charge. |
| 24 | M&L for Mild Steel Joist, channel, angle, mild steel section or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) FE 290 Gde 165 complete all as per specified and directed. |
| 25 | S&F Welded steel wire fabric fixed complete to steel member as a weld mesh fencing weight should not be exc 4.0 kg/sqm including all cutting and waste also including fabrication with angle iron frame and welded with MS post etc complete all as specified and directed. |
| 26 | Supply of chain link MS galvanised fencing 3.00mm dia size of mesh 50X50mm including straining bolt,bar and binding wire. complete all as per specified and directed. |
| 27 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as per specified and directed by Engineer -in-charge. |
| 28 | M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of neck 11 to 15mm. complete all as per specified and directed by Engineer -in-charge. |
| 29 | Supply only mild steel round 10MM dia bars, in available lengths to strengthening chain link fencing including two coat of synthetic enamel paint over and including a coat of red oxide complete all as per specified and directed. |
| 30 | Supply and fix Mild steel in flat Fe-410-W(Gde-E-250) quality-A, in available lengths to strengthening chan link fencing. complete all as per specified and directed by Engineer -in-charge. |
| 31 | Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed. |
| 32 | S & F Galvanised 2 strand, steel barbed wire 2.00mm dia at 75mm spacings and training and fixing to any type of standard rails training bolts, including, securing or tying at crossings with and provision of galvanised mills steel wire, staples or steel pins, etc. as direcdted ( each line wire to be measured). |
| 33 | Dismantling the existing concertina coil and S&F of 610mm dia punched tape concertina coil as per IS 4454 with galvanised coating and punched tape material as per IS 513 deep drawn quality with galvanising coating, having medium barbs (barb length 24+1mm, pitch between two barbs 35+1mm) fixed in position and secured to both sides of shaped angle iron post, as in fencing to steel post and to another coil/MS ribs including fixing with special galvainsed fasterner such as J clip C clip, U clips(Weight of each coil shall be 8.5 Kg with coverage max 6m stretch length) complete all as specified and directed. |
| 34 | M&L for mild steel framed work Fe - 410-W-(Gde-E250) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guids) and hanging also fastening and fixing complete. |
| 35 | Dismantling floor, hearth wall tiling and including including M&L 18/20mm thick black granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills, cooking plateforms and like in premix cement mortar including pointing in white premix cement mortar using marble dust with admixture of pigment to match the shade of stone including rounding and moulding of edge and making hole for cooking gas pipe complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender