Tender For special Repair Wk Of 04 X Toilet Nearby Or Attach Line (Bldg No T-29) Of 39 Eme Bn (Tpt) And special Repair Of Mt Store At 734 Tpt Wksp Coy Np-82 Of 39 Eme Bn (Tpt) Under Ge (West) Pathankot
Tender Value
23.39 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
2 days left
EMD
46780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Wk Of 04 X Toilet Nearby Or Attach Line (Bldg No T-29) Of 39 Eme Bn (Tpt) And special Repair Of Mt Store At 734 Tpt Wksp Coy Np-82 Of 39 Eme Bn (Tpt) Under Ge (West) Pathankot
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part-I B/R PortionM&L for Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of brick work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description upto height 12m, complete all as specified & directed. |
| 4 | Dismantling tile work in floors / walls of thickness 10 to 25mm laid in cement mortar including desposal of rubbish out of defence land as per |
| 5 | Taking down of wooden/Iron chowkats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed. |
| 6 | Taking down of wooden/ Iron chowkatts or frames (without taking off shutters from frame)exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed . |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for including grills, door, truss, gate, rafters, purlins etc complete all as specified and directed. |
| 8 | Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed by Engr-in-Charge. |
| 9 | Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed by Engr-in-Charge. |
| 10 | Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm complete all as specified and directed by Engr-in-Charge. |
| 11 | Demolishing R.C.C. slab/ manhole cover etc. by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars |
| 12 | Dismantling roofing Asbestos Cement sheet including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
| 13 | M&L for in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 stone aggregate 40 mm nominal size derived from natural sources) complete all as specified and directed by Engr-in-charge. |
| 14 | M&L for 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub floor, Sub bases, floors and pavings etc complete all as specified and directed by Engr in Charge. |
| 15 | M&L for 25 mm thick Cement concrete type B-12, 1:2:4 (20mm graded aggregate) as in sub floor, Sub bases, floors and pavings etc to receive the tile complete all as specified and directed by Engr in Charge. |
| 16 | M&L for Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size (Recycled Aggregate (RA) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and directed by Engr-in-charge. |
| 17 | M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and as directed. |
| 18 | M&L for Half Brick work with burnt clay brick work with sub-class 'B' bricks having crushing strength not less than 75 Kg/Sqm, straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1:6. |
| 19 | M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces wall in cm 1:6 to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed. |
| 20 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in cm 1:4 to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed. |
| 21 | Supply only `Liquid Water Proofing Compound complete all as specified and directed by Engr-in-charge. |
| 22 | M&L for preparation of newly plastered surfaces and crack filling with crack seal upto 10m where required and making good/smooth the surface with 2 mm wall putty with silicon additives and sanding thes surface for removal of loose particles and applying one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coats of two Oil Bound distemper complete all as sepcified and directed.Note: All treatment shall be doneby authorised OEM with the help of mechanical means. |
| 23 | M&L for preparation of newly plastered surfaces and crack filling with crack seal upto 10m where required and making good/smooth the surface with 2 mm wall putty with silicon additives and sanding thes surface for removal of loose particles and applying one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties . complete all as sepcified and directed.Note: All treatment shall be doneby authorised OEM with the help of mechanical means. |
| 24 | M&L for Non skid ceramic tiles in floor in of size 400x400mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelingcomplete all as specified and directed by Engr-in-charge. system and rubber mallet for placing the tiles gently and easily. |
| 25 | M&L for Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and directed by Engr-in-charge. |
| 26 | M&L 15mm G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, complete all as specified and directed by Engr-in-charge. |
| 27 | M&L 20 mm G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, complete all as specified and directed by Engr-in-charge. |
| 28 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F in repair white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed by Engr-in-charge. |
| 30 | S&F in repair water closet squatting pan White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests(Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredcomplete all as specified and directed by Engr-in-charge. |
| 31 | S&F in repair wash basin of size 550x400mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including semi flexible waste pipe of suitable dia and painting of fittings and brackets, cutting and making good the walls wherever require: and including pedestal to fixinng with wash basin with neccesary parts etc complete all as specified and as directed. |
| 32 | S&F in repair for Viterous China urinal, half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and waste coupling fit to urinal and including 60mm long brass screws, pointing around urinal back in cement including waste / Urinal pipe complete all as specified and as directed. |
| 33 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed. |
| 34 | S&F in repair of brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and as directed. |
| 35 | S&F in repair of PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 36 | S&F in repair of 15mm bore dia of pipe bib taps cast copper alloy, fancy type chromium plated, with capstan head screwed down, high pressure screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 37 | S&F in repair of stop valve / angle cock fancy type cast copper alloy chromium plated with long shank and cup(concealed type) capstan head serewed down, high pressure for 15 mm dia iron pipe complete all as specified and as directed. |
| 38 | S&F in repair 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 39 | S&F in repair 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F in repair of CP Grating with hole /with out hole of dia 125 mm complete all as specified and as directed. |
| 41 | S&F in repair Stainless Steel Soap Dish or Soap Holder Dish for Bathroom with fixing arrangement complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F in repairs Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed by Engr-in-charge. |
| 45 | S&F in repair 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed by Engr-in-charge. |
| 46 | S&F in repair 30 mm thick pre laminated PVC door shutters factory made panel PVC door shutter consisting of on inner side, and joined together with solvent cement adhesive additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading complete all as specified and directed by Engr-in-charge. |
| 47 | S&F in repair factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVCfoam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDMrubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size,complete as per manufacturer’s specification and direction of Engineerin-Charge. |
| 48 | S&F in repair steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills made out of 10 mm dia round bars glazing with 3 mm thick oridinary glass, guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over and including a coat of red oxide primer all as per drg No CEPZ/ TD/032/13 Sheet 1/2 complete all as specified and directed. |
| 49 | S&F in repair 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-charge. |
| 50 | S&F in repair of aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed. |
| 51 | S&F of 150mm size,extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. |
| 52 | S&F of 100 mm size SS butt hinges with galvanised mild steel hinges complete all as specified and as directed. |
| 53 | S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed. |
| 54 | S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as directed. |
| 55 | S&F pressure 300 mm dia NP3 class R.C.C.pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc. complete all as specified and as directed. |
| 56 | S&F cement concrete 1:4:8 graded stone aggregate 40 mm nominal size up to haunches of S.W. pipes including bed concrete for 300 mm bore pipe as per standard design complete all as specified and directed by Engr-in-charge. |
| 57 | S&F of 110 mm bore PVC (SWR) bends complete all as specified and as directed.. |
| 58 | S&F of 75/100mm PVC(SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and as directed. |
| 59 | S&F of 110 mm bore PVC (SWR) cowl complete all as specified and as directed.. |
| 60 | S&F of 110 mm bore PVC (SWR) accessible door bends complete all as specified and as directed.. |
| 61 | S&F of PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed. |
| 62 | M&L for Providing factory made precast cement concrete type B1 1:2:4 (20 mm graded aggrgate) as in but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces |
| 63 | S&F rolled mild steel any sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality B complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F Pre- painted galvalume aluminum zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F Pre- painted galvalume aluminum zinc coating AZ-150 GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 66 | Taking Down rolling Shutter of any size and type complete all as specified and as directed by Engr in charge. |
| 67 | M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in cm 1:3 to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed. |
| 68 | M&L for preparation of newly plaster surfaces of ceiling and applying three coats of white wash over ceiling complete all as specified and as directed. |
| 69 | S&F Steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle and connected associries complete all as specified and directed by Engr-in-charge. |
| 70 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F steel window/Ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing (glass) , guaging (wire mesh) and two coat synthetic enamel paint over a coat of red oxide primer all as per drg No CEPZ/TD/245/01 Sh 1/1, CEPZ-TD/246/01 Sheet 1/2 and Sheet 2/2 complete all as specified and directed by Engr-in-Charge. |
| 72 | M&L for repairing to chajjas, roof projection and facias of exposed reinforcement surface or damaged loose RCC surface including cutting down rusted/exposed reinforecement and applying one coat of cement slurry and filling with cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggrehate) and finisjed with cement mortar 1:3 using coarse sand. Thickness of RCC member not exc 150mm including scaffolding upto 8.0m height, complete all as specified and as directed by Engr-in-charge. Note: No extra rates of scaffolding will be paid separately against this item. |
| 73 | M&L PCC 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) mixed with water proofing compound as per manufacturer’s instructions as in padding on roof, surface finished even and smooth without using extra cement all as specified and as directed.Note:- WPC shall be measured and paid separately |
| 74 | M&L liquid water proofing treatment to RCC roof slab in following procedure :(a) M&L for liquid water proofing treatment to RCC roof slab incl dismantling of existing water proofing treatment with existing APP sheet ,plaster , mud fuskas,brick tiles etc of any description in following procedure:-(b) Prepare the surface by cleanining with concrete surface grinder/ wire brush and a high pressure water jet and ensure that it is free of dust, oil and loose particles. Damaged portions, hollow area must be repaired with epoxy mortar and repair cracks of old concrete by cutting 'V' groove, corners and joints of drain pipes, channels etc. treated with epoxy mortar prepared with epoxy primer (as per manufacturer's instructions).(c) Laying 10mm thick rendering in Cement mortar 1:3 with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of concrete roof surfaces, finished even and fair to receive treatment on roof Complete (d) Applying three coats of polyurea waterproofing coating as per manufacturer's instructions for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx. 500% ± 50% and tensile strength at 14 days of 5MPa.(e)The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge / Consultant. (Note:- minimum 6 hrs interval between two coat shall be maintained)(f) All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system.Note:- (i) Work to be carried out by authorized applicator and as per manufacturer’s instructions.(ii) Providing test with filling of water for continuous 48 hours if there is any leakage than entire treatment will be done again by contractor without any additional cost.(iii) The rate includes for filling cracks in existing roof with epoxy cement mortar using suitable bonding agent before laying cement plaster” |
| 75 | S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed. Please Enable Macros to View BoQ information |
| 76 | S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender