Tender For Repairing Of Fountains And Pumps At Indira Sagar Power Station, Narmada Nagar, District Khandwa (Mp)
Tender Value
9.48 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
19 days left
EMD
19000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Nimar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Fountains And Pumps At Indira Sagar Power Station, Narmada Nagar, District Khandwa (Mp)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid incement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. |
| 2 | Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 3 | Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 4 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to givehigh gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Granite fine grained dark crystal of other colours and various patterns |
| 5 | Fountain for punasa guest house :- SPARY HEIGHT : 06 FT 08 FT MAXSupply of Water level independed foaming with vertical adjustable special effect of metal brass and chrome plated including other combination with base plumbing control valve assembly with all inlet pipe ( 50mm UPVC/HDPE ) and assesories, for Fountain of punasa guest house |
| 6 | Fountain for punasa guest house :- SPARY HEIGHT : 06 FT 08 FT MAXSupply of Nozzel mounted IP68 extruded linear LED outdoor luminaire of length having power consumption of 6*3=18 W . LEDs used in the fixture shall have very high life with RGB LEDs inside luminiare.60 Hz. Approved make: for Fountain of punasa guest house |
| 7 | Fountain for punasa guest house :- SPARY HEIGHT : 06 FT 08 FT MAXControl panel box with CRC sheet powdered coated unit starter for pump 5.0 HP (01 nos.) with MCB s , pragramable controllar with 6 stage dancing controller of Driver /Transformer for light 12vdc,Supply voltage : 12-18 VDC Withindividual control Voltmeter , Indicator and provision for space and for lights & all MCB Should be , for Fountain of punasa guest house |
| 8 | Fountain for punasa guest house :- SPARY HEIGHT : 06 FT 08 FT MAXComplete installation of fountain and setting at site for Fountain of punasa guest house |
| 9 | Fountain for Durga Mandir Parisar No-1Supply of fountain Ring 8ft dia 50 mm GI pipe Class B with 40 adjustable jets, 20 fountain ajustable jets and ring 2 ' ftdia Gi pipe B class 32mm with 10 adjustable jets . total vertical adjustable spetial effect jets 70 nos with metal brass and chrome plated 3/8inch size with other combination with base control assembly for individual ring with base supprt GI stand forholding ring. for fountain of Durga temple |
| 10 | Fountain for Durga Mandir Parisar No-1Supply installation testing and commissioning of Non Integral IP67 extruded linear LED outdoor luminaire of M length having power consumption of 6*3=18 W . LEDs used in the fixture shall have very high life of 60000 hrs at 70% lumen maintenance and with RGB LEDs inside luminiare. External LED Driver shall be suitable for Input voltage range of 100 to 240V AC, 50 / 60 Hz. Approved make: for fountain of Durga temple |
| 11 | Fountain for Durga Mandir Parisar No-1supply installation testing and commissioning of Fountain on line strainer cum screen filter Inlet and outlet100/ 50 mm Dia with ss net and base drain provision for fountain of Durga temple |
| 12 | Fountain for Durga Mandir Parisar No-2Supply of Water level independed Dinond cluster and foaming with vertical adjustable special effect of metal brass and chrome plated including other combination with base plumbing control valve , |
| 13 | Fountain for Durga Mandir Parisar No-2Supply of Clamp mounted IP68 extruded linear LED outdoor luminaire of length having power consumption of 6*3=18 W . LEDs used in the fixture shall have very high life with RGB LEDs inside luminiare.60 Hz. Approved make. |
| 14 | Fountain for Durga Mandir Parisar No-2supply pragramable controllar with 3 stage dancing controller of Driver /Transformer for light 12vdc,Supply voltage : 12-18 VDC With enclose and indicator |
| 15 | Fountain for Durga Mandir Parisar No-2Supply of Fountain on line strainer sum screen filter online 40 mm Dia As per approved make. |
| 16 | Fountain for Durga Mandir Parisar No-2Complete installation of fountain and setting at site |
| 17 | Grading roof for receiving water proofing treatment with Cement mortar 1:4 (1cement : 4 sand). |
| 18 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCCstructures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant,tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline powder: 2 parts water by weight) for vertical surfaces and 3 :1 (3 parts integral crystalline slurry : 1 part water by weight) for horizontal surfaces and applying the same from positive (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R- 2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer- in-charge. The product performance shall carry guarantee for 10 years against any akage. For horizontal surface one coat @1.10 kg per sqm. |
| 19 | Supplying & installation of approved make required capacity 3 phase, 50 Hz, 415V, open well submersible pump, with control panel starter with dry run protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable. 5.0 HP head metre 12-28, discharge LPM 1200-390 |
| 20 | Supplying & installation of approved make required capacity 3 phase, 50 Hz, 415V, open well submersible pump, with control panel starter with dry run protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable. 7.5 HP head metre 12-32, discharge LPM 1620-420 |
| 21 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 4.0 sq.mm multi strand |
| 22 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 6.0 sq.mm multi strand |
| 23 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender