Housing Urban and Rular Development Local Bodies Closing in 1 days TDR #58028930

Tender For Orathanadu Block - Pugf- 2026-27 - Renovation Of Anganwadi Building In Thethadikollai In Ambalapattu North Panchayat In Orathanadu Block.

Issued by Local Bodies · Thanjavur, Tamil Nadu
Tender Value
5.57 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
1 days left
EMD
5600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Orathanadu Block - Pugf- 2026-27 - Renovation Of Anganwadi Building In Thethadikollai In Ambalapattu North Panchayat In Orathanadu Block.

BOQ

Name of Work:- ORATHANADU BLOCK - PUGF- 2026-27 - Renovation of Anganwadi Building in Thethadikollai in Ambalapattu North Panchayat in Orathanadu Block.
Sl. No. Item Description
1Renovation of Anganwadi Building in Thethadikollai in Ambalapattu North Panchayat in Orathanadu Block.
2Supply and fixing of PUF roof panels made up of minimum 0.5mm thick PPGI corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC free polyurethane foam (PUF) of density 40kg + 2 Kg/cum as insulation in between .The polyurethane foam shall confirm to latest IS 12436. The minimum thickness of PU foam layer shall be 29mm for having 30mm (min) thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSM as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Providing ridges or hips ,encasing the ends of Panel with plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc complete excluding the cost of trusses, purlins and inclusive of cutting to size and shape wherever required.
3Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
4Brick work using country bricks of size 83/4\\"x41/4\\"x23/4\\" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.
5Plastering with Cement Mortar 1:5 (One cement and Five P.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
6Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distember, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). For INNER WALL and Ceiling.
7Painting two coats of Old Iron works synthetic Enamel paint of approved colour and make over one coat of anti corrosive Zinchromite primer over New Steel work, suitably prepared for receiving the paint by surface scraping, rubbing applying filler etc. including cost of filler, primer, paint all complete as per drawings and specifications.
8Supply and fixing of mild Steel Doors of 1.05x1.20m size with standard specification including cost and conveyance of all materials and all labour charges etc complete.
9Supply and fixing of mild Steel Windows of 1.00x2.00m size with standard specification including cost and conveyance of all materials and all labour charges etc complete.
10Painting two coats of New Iron works synthetic Enamel paint of approved colour and make over one coat of anti corrosive Zinchromite primer over New Steel work, suitably prepared for receiving the paint by surface scraping, rubbing applying filler etc. including cost of filler, primer, paint all complete as per drawings and specifications.
11Electrical Arrangements
12Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC light/ fan point (SD No.20)
13Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed Plug point (SD No.12)
14Supply and fixing of 4'-18W LED tube with fitting inclusive of all charges SD 88
15supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 110
16Supply and fixing of 300mm (12\\") sweep (light duty) AC exhaust fan complete with necessary wall opening andmaking good of the wall Exhaust Fan (SD 114)
17Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64
18Kitchen Stage Arrangements
19Brikc work in CM 1:5 mix usihg country bricks of size 8¾x4¼x2¼ including cost and conveyance and all other labour charges etc., completed
20Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface, chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent and as directed
21Painting the walls with two coats Exterior Emulsion Paint over one coat of primer as instructed including cost of materils and all labour charges etc., completed
22Cost, supply and fixing of Cuddappah slab 20/30mm thick for Shelf, Cupboard and Kitchen top including cost and conveyance of all materials and labour charges etc., complete
23Cubboard Shelf Arrangements
24Brikc work in CM 1:5 mix usihg country bricks of size 8¾x4¼x2¼ including cost and conveyance and all other labour charges etc., completed
25Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface, chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent and as directed
26Painting the walls with two coats Exterior Emulsion Paint over one coat of primer as instructed including cost of materils and all labour charges etc., completed
27Cost, supply and fixing of Cuddappah slab 20/30mm thick for Shelf, Cupboard and Kitchen top including cost and conveyance of all materials and labour charges etc., complete
28Repairs to Toilet Arrangements
29Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification
30Brick work using country bricks of size 83/4\\"x41/4\\"x23/4\\" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.
31Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
32Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
33Cost, supply and fixing of New Door size of 0.75x1.20m including cost and conveyance of all materials and labour charges etc., complete
34GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58028930
AUTHORITY Local Bodies
TENDER VALUE 5.57 Lakhs
LAST DATE 28-10-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Orathanadu Block - Pugf- 2026-27 - Renovation Of Anganwadi Building In Thethadikollai In Ambalapattu North Panchayat In Orathanadu Block.
Basic Detail
Tender No Rc.No.2526/2026/A2 dated.13.10.2026
Bidding Type Tender
Location
City Thanjavur
State Tamil Nadu
Key Dates
Publish Date 14 Oct 2026
Submission Date 28 Oct 2026
Open Date 28 Oct 2026
Finance
Tender Value 5.57 Lakhs
Tender Fee Ref. Documents
EMD 5600
Exemption Not Available
Document List
ba1c1eae-178e-44f4-99e1-7d38ef92a3df.html
BOQ_857842.xls
PriceBidPAnganwadiAmbal.pdf
TechinalBidAnganwadiAmbal.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Oct 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

ba1c1eae-178e-44f4-99e1-7d38ef92a3df.html

xls

BOQ_857842.xls

pdf

PriceBidPAnganwadiAmbal.pdf

pdf

TechinalBidAnganwadiAmbal.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender