Tender For Renovation Of Sldc Section On Ground Floor Of Annex Building Aquem Margao.
Tender Value
21.43 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
6 days left
EMD
42872
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Sldc Section On Ground Floor Of Annex Building Aquem Margao.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 2 | Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50 mts. lead. |
| 3 | Extra for cutting reinforcement bars in R.C.C. or R.B. work |
| 4 | Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead |
| 5 | Of area 3 sq.m. and below |
| 6 | Area beyond 3 sq.m. |
| 7 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 8 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 9 | Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring 'T' with : |
| 10 | b) GI Metal Ceiling Clip in plain Beveled edge global white colour tiles of size 600x600 and 0.4-0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. |
| 11 | Providing and fixing of aluminum shutters in accordance with the specification annexed with Goa schedule of Rates (2014) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge. Fixed partitions with12 mm thick both side laminated Particle board. |
| 12 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Fixed partitions |
| 13 | Plain plate glass |
| 14 | Providing and fixing anodised aluminium single or double leaf door shutters with heavy sections as specified. |
| 15 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Fixed windows/ ventilators matching with 18 mm series shutters. |
| 16 | Plain glass |
| 17 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section |
| 18 | Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete. |
| 19 | Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. complete. |
| 20 | Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 21 | Providing and installation of raised flooring |
| 22 | Visitor chairs -Artificial Leatherite (Colour as per selection) revolving office chair: Nylon Base Self Calibrate Mechanism with Adjustable Arms Visitor chairs -Artificial Leatherite (Colour as per selection) revolving office chair: Nylon Base Self Calibrate Mechanism with Adjustable Arms ·Self Calibrating Multilock Mechanism ·Adjustable Lumbar Support ·One Way Adjustable Arms (Height) ·Nylon Base . Leatherite Upholstered Cushion Seat |
| 23 | Supplying and placing in position sofa of the following specifications. Height of the sofa: 750mm or as per design/architects approval. Upholstery: Microfibre Polyester /artificial leather. Frame Material: Kiln dried wood. Seat Foam: Slab stock foam with recron layer. Also bonded foam used as a supporting material beneath slab stock. Foam Density: 34 kg/ cubic m. Back Foam: Slab stock foam with recron fill at back and anns. Foam Density: 34 kg/cubic nl. Webbing Material: S- spring along with nylon strips. The overall dimension of the sofa shall be as per design and specification. The upholstery is made of fabric /artificial leatherite. The seat and backrest is filled with recron. The frame is made up of tropical wood. Following are the types of sofa: Brand: urban habits / Prontax / Cube make or equivalent as aproved by architects Three Seater Sofa fully Upholstered design for multi purpose seating in multiple arrangements. Fabric / leatherite Colour as per approval. |
| 24 | 1 Seater Sofa fully Upholstered Sofa design for multi purpose seating in multiple arrangements. Fabric Color as per image/as approved by Architect. |
| 25 | Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20mm x 5mm size with top and bottom rails of T-iron, 40 x 40 x 6 mm with 38 mm dia. Steel pullys completely bolts locking arrangement, stopper, handles including applying a priming coat of red lead paint. |
| 26 | Providing and fixing Colouron Plus galvulium roofing Sheets of 0.45mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make ) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 27 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 28 | Reception table -1800x600x750mm high (as per design) made using 18mm thick BWP ply structure and finished using combination of 1mm thick designer textured laminateand fluted panels (as per selection). |
| 29 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 30 | Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead. |
| 31 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a) All works upto plinth level |
| 32 | Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. |
| 33 | In flats of all sizes |
| 34 | Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 35 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles |
| 36 | Fixing glazed / ceramic / vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS:15477, using 5 kg. adhesive per sq.m of tile area, in average 3 mm thickness |
| 37 | Providing new electrical wiring, lighting points, fan points, power points and switches in new control room of SLDC, margao in Annex building of Vidyut bhavan- Aquem-Margao. |
| 38 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in PVC casing caping with modular switch, modular plates, suitable size modular surface box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. (c) Group C -- with Cat A Modular Accessories |
| 39 | Stepped type Modular 2 module Fan Regulator, Cat A |
| 40 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent PVC casing capping of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm casing ) |
| 41 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent PVC casing capping of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm casing ) |
| 42 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 2 no 6 pin 15/16 A modular socket outlet and 2 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations) (a) Cat A |
| 43 | Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 1 no 6 pin 15/16 A modular socket outlet and 1 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations) (a) Cat A |
| 44 | Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (c) 6 way (8+18), double door, Horizontal type Cat A |
| 45 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A |
| 46 | TPN Cat A |
| 47 | Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately). (b) In rocky strata |
| 48 | Extra for using salt and charcoal for pipe earth electrode as required( 160 Kgs of Charcoal and 5 Kgs of Salt). |
| 49 | Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Department. |
| 50 | Supplying and fixing 50 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (d) TP, Cat A |
| 51 | 1.1KV, 3 1/2 Core XLPE Armoured cable a. 3 1/2 C X 16 sqmm |
| 52 | Supplying and erecting LED square / circular 9 to 12W down lighter having pressure diecast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. |
| 53 | Supplying and erecting LED square / circular 13 to 15W down lighter having pressure diecast aluminum housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete 12w black cob adjustable spot light on track Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender