Tender For Provision Of Drinking Water To Ekalavya Model Residential School(Emrs), Tumudibandha
Tender Value
90.44 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
10 days left
EMD
90444
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kandhamal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Drinking Water To Ekalavya Model Residential School(Emrs), Tumudibandha
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Oct-2026 | Corrigendum | Technical Bid | 27-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Construction of 4.00mtr dia RCC Intake WellSupplying all labour, T&P and Earthwork in hard soil for excavation of well foundation trenches and column footings including dressing and levelling the bed & depositing the soil with initial lead of 50m & initial lift of 1.5 mtr etc all complete as per direction of the Engineer in-charge. |
| 2 | Supplying all materials, labour, T&P , fabricating and fixing at site of steel cutting Edge suitable for following outer dia RCC/Masonry well through sinking process including providing and cutting of M.S Angle & Plates, bending to required shape etc all complete as per direction of the Engineer in-charge.(a) Steel cutting Edge suitable for 5.05m outer dia RCC well / masonry well i) The work should be fabricated in 04 (four pieces) for smooth fabrication including provision for jointing.ii) The M.S Channels (100mm x 100mm x 10mm) & M.S plate (200mm wide & 10mm thick) to be used in this work should confirm to relevant I.S Specifications & to the corresponding ammendments if any.iii) The vertical Bond Rod should be 900mm long threaded up to a distance of 150mm from bottom at one end.iv) M.S Stiffeners in triangual pieces made out of 10mm thick M.S plate to be provided at a spacing 300mm from centre to centre at top and 300mm centre to centre at bottom of the Cutting Edge completely welded.v) Horizontal Anchor bars made out of 16mm dia M.S Rod of 200mm lengh to be provided at a spacing 300mm centre to centre of the cutting edge. |
| 3 | Supplying all materials, labour, T&P and providing RCC MS plate centring rigid smooth centring shuttering aty all heights of work such as well kerb , well steining well cap using required no of vertical & horizontal support of scaffolding with joints NG rails and channels steel shuttering plates incluiding welding , bolting cost conveyance roilty and all other taxes of all materials and depositing the debries away from the work site complete to receive reinforcement grills and concrete as per requirement |
| 4 | Supplying all materials, labour, T&P and providing RCC work of M20 grade with 20mm and down graded crusher broken hard granite chips including hoisting and laying, cost, conveyance, royalties and taxes of all materials, labour, T&P required for the work etc. all complete as per direction of the Engineer in-charge. |
| 5 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 18 to 20 gauge etc. all complete as per direction of the Engineer in-charge. |
| 6 | Supplying all materials, labour, T&P and 5.05 mtr Outer dia RCC well sinking in all kinds of soils to lines, levels and plumb by scooping out from inside and below the steining including cost, hire and running charges of tools and plants, supplying & working of pumps, bailing out of water and removal of all aterials and abstacle from inside the well b divers etc incluiding precation against shifting and tilting desposal of the soil with all lead and lift complete as directed by the Engineer -in charge. |
| 7 | Construction of MS Cover Slab for Intake WellSupplying all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge.(i)MS Channel of size (100X 50 X 50 X 6 )mm |
| 8 | MS Anglel of size (50 X 50 X 6 )mm |
| 9 | MS Anglel of size (25 X 25 X 5 )mm |
| 10 | flat 6 mm thick |
| 11 | 2.5 mm thick MS plate covering |
| 12 | Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure etc. all complete as per direction of the Engineer in-charge80mm dia G.I Pipe chain pully stand. |
| 13 | G.I pipe railing 40 mm dia |
| 14 | Supplying all materials, labour, T&P and Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. all complete as per direction of the Engineer in-charge. |
| 15 | Construction of Pump ChamberSupplying all labour, T&P and Earth work in excavation of foundation in hard soil within 50m initial lead and 1.5m initial lift including rough dressing and leveling the bed etc all complete as per direction of Engineer-in-Charge |
| 16 | Supplying all materials, labour, T&P and Providing & laying cement concrete of proportion 1:4:8 (1 cement:4 course sand:8 stone aggregate of 40mm downgraded) of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc all complete as per direction of Engineer-in-Charge |
| 17 | Supplying all materials, labour, T&P and Providing and constructing Fly Ash Brick Masonry at foundation in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc all complete as per direction of Engineer-in-Charge.In Foundation and Plinth |
| 18 | Supplying all materials, labour, T&P and Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc all complete as per direction of Engineer-in-Charge. |
| 19 | Supplying all materials, labour, T&P and providing Rigid and Smooth Centering and Shuttering for R.C.C. works including false works and dismantling then after casting including cost of materials etc all complete as per direction of Engineer-in-Charge.Plinth Band |
| 20 | II) Lintels |
| 21 | III) Chajja, Stair & Roof Slab |
| 22 | Supplying all materials, labour, T&P and providing & laying R.C.C. ( 1:1-1/2: 3 ) using 12mm size Hard Granite Chips, including centering & shuttering, laying, spreading, consolidating, curing etc. (excluding reinforcement ) including cost of all materials, labour, T&P, taxes, transportation, loading, unloading etc all complete as per direction of Engineer-in-Charge. |
| 23 | Supplying all materials, labour, T&P and providing & fixing steel reinforcement in superstructure for reinforcement concrete including transporting, decoiling, straightening, cutting, binding, placing in position at all levels & binding with 18-20 gauge soft drawn annealed binding wire complete as per specification & drawing and direction of Engineer-in-Charge. Payment will be made as per standard ISI tables on weight basis. |
| 24 | Supplying all materials, labour, T&P and providing and constructing Brick masonry at all floors and locations using best approved quality Fly Ash. bricks from local available using in cement mortar 1:6 to correct line, level & plumb, including, scaffolding, watering, curing, recking out joints etc. including cost of all materials, labour, transportation, Taxes etc all complete as per direction of Engineer-in-Charge. |
| 25 | Supplying all materials, labour, T&P and providing and applying bearing coat with 12mm thick cement plaster (1:4) over brick/ Concrete work with cement punning. with bitumen painting over top of plaster etc all complete as per direction of Engineer-in-Charge. |
| 26 | Supplying all materials, labour, T&P and Providing & applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc all complete as per direction of Engineer-in-Charge. |
| 27 | Supplying all materials, labour, T&P and Providing & applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc all complete as per direction of Engineer-in-Charge. |
| 28 | Supplying all materials, labour, T&P and Providing & Fixing Vetrified tiles of size (600mm X 600mm ) in floors on 25mm thick bed & cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete etc. as per direction of Engineer-in-Charge. |
| 29 | Supplying all materials, labour, T&P and providing Plastic Paint two coats of approved shade over a coat of primer on new work including cost of Paint & primer etc all complete as per direction of Engineer-in-Charge |
| 30 | Supplying all materials, labour, T&P and providing two coats of weathered coats of approved shade over a coat of primer on new work including cost of distemper & primer etc all complete as per direction of Engineer-in-Charge |
| 31 | Supplying all materials, labour, T&P and Providing, fabricating and fixing in position MS railing grill in entrance gate & Collapsible Door with MS sections, Flat angles, channels MS sheet etc. as per drawing including anchor bolt and both side locking arrangement, roller and rail etc. grouting the anchor bolt and rail matching to the levels with P.C.C. (1:2:4) including cost of all materials, labour, fabrication, Transportation etc all complete as per direction of Engineer-in-Charge |
| 32 | Supplying all materials, labour, T&P and Painting two coats with any approved enamel paints over a coat of primer including cost of all materials and labour charges etc all complete as per direction of Engineer-in-Charge |
| 33 | Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge. |
| 34 | Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge. |
| 35 | Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required |
| 36 | Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.32 Amp D.P.main switch with porcelain base |
| 37 | Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.100 Amp TPN Main switch |
| 38 | Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections. |
| 39 | Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections. |
| 40 | Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm |
| 41 | (b) 180mmx100mmx60mm |
| 42 | Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required4x10 sqmm + 2x6 sqmm |
| 43 | 3x10 sqmm + 1x6 sqmm |
| 44 | 2x4 sqmm + 1x2.5 sqmm |
| 45 | 2x2.5 sqmm + 1x1.5 sqmm |
| 46 | 3x1.5 sqmm + 1x1.5 sqmm |
| 47 | Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge.Short point |
| 48 | Medium point |
| 49 | Long point |
| 50 | Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge. |
| 51 | Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. 5 / 6 Amp one way switch (Piano type) |
| 52 | 3 Pin 5/6 socket outlet (piano tytpe) |
| 53 | Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required. |
| 54 | Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required |
| 55 | Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc. but with charcoal and salt as required. |
| 56 | Construction of Compound Wall:40mtrSupplying all labour, T&P and Earth work in excavation in foundation in Hard soil with in 50m initial lead and1.50m initial lift including rough dressing and breaking clods to maximum5cm to 7cm in size and laying in layers not exceeding 0.30min depth and as per the direction of Engineer-in-Charge |
| 57 | Supplying all materials, labour, T&P and filling with sand including watering ramming including cost, carriage and royalty of all the materials etc all complete as per direction of Engineer-in-Charge |
| 58 | Supplying all materials, labour, T&P and providing C.C.(1:4:8) with 4cm size HG metal including cost carriage royalty of all materials etc all complete as per direction of Engineer-in-Charge |
| 59 | Supplying all materials, labour, T&P and providing RCC (1:2:4) using 12mm cbhg chips including cost carriage royalty of all materials etc all complete as per direction of Engineer-in-Charge |
| 60 | Supplying all materials, labour, T&P, and providing Rigid &smooth centering & shuttering for RCC work including false work & dismantling them after casting including cost of materials etc all complete etc all complete as per direction of Engineer-in-ChargeColumn |
| 61 | Supplying all materials, labour, T&P and providing Labour for MS reinforcement for RCC work including cutting bending, binding and tying the grills & placing in position including cost of binding wire 18 to 20 gauge. and carriage of the MS Rod etc all complete as per direction of Engineer-in-Charge |
| 62 | Supplying all materials, labour, T&P and providing 2.5cm thick DPC in CC (1:2:4) using 12mm cbhg chips including cost, carriage and royalty of all the materials etc all complete as per direction of Engineer-in-Charge. |
| 63 | Supplying all materials, labour, T&P and providing Fly Ash Brick Masonry in CM (1:6) in Super Structure including cost carriage royalty of all materials etc all complete as per direction of Engineer-in-Charge. |
| 64 | Supplying all materials, labour, T&P and providing 2.5cm thick DPC in CC (1:2:4) using 12mm cbhg chips including cost, carriage and royalty of all the materials etc all complete as per direction of Engineer-in-Charge. |
| 65 | Supplying all materials, labour, T&P and providing 16 mm thick cement plaster (1:6) over brick or stone work including cost, carriage and royalty of all the materials etc all complete as per direction of Engineer-in-Charge. |
| 66 | Supplying all materials, labour, T&P and Painting Two coats with weatherd paint of approved shade to give an even shade over a coat of primer including cost of all metrials labour T&P Taxes, conveyance of all materials etc all complete as per direction of Engineer-in-Charge. |
| 67 | Supplying all materials, labour, T&P and fitting and fixing MS Grill gate including fabrication, placing in position including cost, conveyance, taxes etc all complete as per direction of Engineer-in-Charge. |
| 68 | Supplying all materials, labour, T&P and Painting Two coats with appd enamel paint of approved shade to give an even shade over a coat of primer including cost of all metrials labour T&P Taxes, conveyance of all materials etc all complete as per direction of Engineer-in-Charge. |
| 69 | Supplying all labour, T&P and filling foundation and plinth with excavated earth(in Hard soil) including watering ramming including cost, carriage and royalty of all the materials etc. all complete etc all complete as per direction of Engineer-in-Charge. |
| 70 | PROCUREMENT OF SUBMERSIBLE PUMP Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well/Percolation well.Vertical submersible pump 5 HP of 2 Nos. |
| 71 | ACCESSORIES Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells) |
| 72 | Supplying all materials, labour, T&P and wiring of 6.0mm2 3 core PVC Copper submerssible cable with necessary jointing materials and fittings etc all complete as per direction of Engineer-in-Charge. |
| 73 | Supplying all materials, labour, T&P and fitting & fixing of 80mm dia GI Column Pipe with necessary fittings like flanges, Bends, Nut Bolts, Rubber insertion etc.suitable for Horizontal submerssible pump motor with necessary jointing materials and fittings. |
| 74 | Supplying all materials, labour, T&P and fitting & fixing of 6 mm² PVC insulated wire rope with clamp etc with necessary jointing materials and fittings. |
| 75 | Supplying all materials, labour, T&P and lowering, testing, commissioning of vertical submerssible pump motor with supply of tripod stand, chain pully as per direction of Engineer-in-Charge |
| 76 | Storage reservoir - Designing, Testing and commissioning of R.C.C clear water ESR of 50000 ltr ESR 12 mt staging with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / SS Ladder, SS stair in both sides of Steps and around parapet, M.H cover,Jally, all GI Pipe Connection like inlet, out let, Wash Out, Over Flow etc with supply of all required GI Pipe, fittings & specials, as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B- The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the ESR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work. |
| 77 | 0.20 Mld Packaged WTP - Design,Supply, Installation, Testing & Commissioning of Packaged Treatment Plant (Unconventional Type) of different Capacity with 16 hrs operation comprising of Lamella Clarifier, Static Mixture Flocculation Tank, (SMFT) Multi Grade Filter (MGF) with best quality filter media, Lime/ Coagulant/ Polymer Dosing System, Hypo Chloride Dosing System, Raw Water Feed Pump/ Clear Water Transfer Pump (Either/or) Sludge Tranfer-cum- Recirculation system, Filter Feed Pump and Back wash Pump including all fittings like Valves and other special fittings and Electrical Power Supply to the different supplied units with MCB Pannel, internal Electrifications with lighting arrangements within Treatment Plant Site with provision of Chemical Storage and Water Testing Laboratory facility should be from a reputed Manufacturer/ Authorized Distributor/ Authorized Dealer confirming to relevant IS Codes and certified by ISO - 9001-2008 and 14001. It also includes cost of Civil Foundation, Interim Clarified Water Tank, RCC Clear Water Reservoir of required capacity as per requirement, inter-connecting Pipe Lines from Raw Water Inlet to CWR and applying internal epoxy paint on the supplied equipments0.20 Mld Capacity |
| 78 | Rising MainSupplying all labour, materials, T&P , carriage , taxes of materials etc. including fitting & fixing cast Iron sluice valves, NR valves, Butterfly valves with double flanged end for water works purposes for the following nominal diameter as per specification complete as per direction of Engineer-in-charge (including the cost of IS marked cast Iron sluice valves , IS No. 14846/2000, Non Return Valve IS No. 5312(Part-I)/84, bolts & nuts, rubber insertation which will be supplied by the Contractor & the original purchase bill and manufactures test certificate of the valves from firm should be produced along with contractor's bill)100 mm dia CI DF Sluice Valve |
| 79 | 100 mm dia CI DF NR Valve |
| 80 | Supplying all labour, materials, T&P and Fixing single Air valve for water works purposes for the following diameter, including drilling the water main (CI or pipes with metal straps ) as per specification etc. all complete as per direction of Engineer-in-Charge.25 mm CI Air Valve |
| 81 | Supplying all materials, labour, T&P for Construction of sluice valve chamber and NRV chamber of inside size 0.90m x 0.90m x 1.10m in Fly Ash Brick masonry in CM(1:6) with wall thickness 25cm, 15cm thick base concrete in CC(1:4:8) using 40mm size HG metal, plastering inside wall, out side wall, 30 cm from top and top of wall in CM (1:6) with neat cement punning, providing 7.5cm thick precast R.C.C. cover slab (three piece) in C.C.(1:2:4) using 12 mm size HG chips with 12 kg MS reinforcement including excavation of chamber in all kinds of soil complete. |
| 82 | Supplying all materials, labour, T&P for Construction of Air valve chamber aof inside size 0.60m x 0.60m x 1.10m in Brick masonry in CM(1:6) with wall thickness 25cm, 15cm thick base concrete in CC(1:4:8) using 40mm size HG metal, plastering inside wall, out side wall, 30 cm from top and top of wall in CM (1:6) with neat cement punning, providing 7.5cm thick precast R.C.C. cover slab (three piece) in C.C.(1:2:4) using 12 mm size HG chips with 12 kg MS reinforcement including excavation of chamber in all kinds of soil complete. |
| 83 | Supplying of all labour, T&P, material including taxes for laying galvanized mild steel tubes (medium grade) with supply and fittings of specials like flanges, bends, Tees, Nuts Bolts, Rubber Insertions , jointing materials etc. as per requirement of field condition conforming to IS:1239, part-1 of the following nominal bore including welding at site as per requirement to site codition & testing etc. complete as per specification and direction of Engineer-in-Charge100mm dia GI Pipe MG |
| 84 | 5 Year Repair & MaintananceThe contractor shall maintain the PWS Project to EMRS for 5(Five ) Years from the completion date in such a manner that EMRS will get drinking water 24X7 without facing any problem. The contractor shall repair and replace any types of defects arise within 24 hours of the receipt of complaint either from EMRS or from department. The contactor shall maintain all structures of the PWS Schemes as per terms and conditions of DTCN and technical specifications. as per the direction of Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender