Tender For Provn Of Toilet Facility Near Sports Complex At Chaf Bangalore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Oct 2026
8 days left
EMD
9688
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Facility Near Sports Complex At Chaf Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out hard /dense soil complete all as specified and as directed by Engr-in-charge. |
| 2 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth and getting out hard /dense soil complete all as specified and as directed by Engr-in-charge. (Item 2 of 3(a) (i) + item 1 of 6(d) ) |
| 3 | Material and labour for PCC 1:4:8 type D2 (Using 40mm graded stone aggregare) in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-charge. (Item 3 of 3(a) (i) + item 4 of 6(d) ) |
| 4 | Material and labour for cutting chases through concrete block or stone walls, pining, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunsheds, shelves, lentel etc., and making good cutting exc 20cm girth complete all as specified and as directed by Engr-in-charge. |
| 5 | Material and labour for formwork to sides flat rough finished of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed by Engr-in-charge. |
| 6 | Material and labour for formwork to sides and soffits of rough finished surface of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and as directed by Engr-in-charge. |
| 7 | Material and labour for formwork to soffits of rough finished surface of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (horizontal or sloping) complete all as specified and as directed by Engr-in-charge. |
| 8 | Material and labour for formwork to rough finished surface of concrete flat chajjas, troughs and similar items including edges complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for formwork to edges /sides of rough finished surface of roof slab 15cm thick complete all as specified and as directed by Engr-in-charge. |
| 10 | Material and labour for RCC (design mix) M-25 (Using 20mm graded stone aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engr-in-charge. |
| 11 | Material and labour for RCC (design mix) M-25 (Using 20mm graded stone aggregate) for RCC beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engr-in-charge. |
| 12 | Material and labour for RCC (design mix) M-25 (Using 20mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engr-in-charge. |
| 13 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-charge. (Item 13 of 3(a) (i) + item 11 of 6(d) ) |
| 14 | Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm diain stirrups, spacers and binders complete all as specified and as directed by Engr-in-charge. |
| 15 | Material and labour for pre-cast cement concrete block masonry with soild blocks, type C-1 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. (Item 15 of 3(a) (i) + item 14 of 6(d) ) |
| 16 | Material and labour for providing precast cement concrete solid building blocks or slabs type C1 1:3:6 (Using 20mm graded stone aggregate) 10 cm thick (with plain or interlocking joints as directed) and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 17 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 18 | Material and labour for rendering 10mm thick in cement mortar 1:6 and 5mm thick in cement mortar 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200ml per 50kg of cement or as per manufacturer's instruction etc., finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.Note: WPC shall be measured and paid separetely. |
| 19 | Material and labour for rendering 5mm thick on concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 20 | Material and labour for 100mm thick hardcore of gauge not exc 63mm of broken stone, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in-charge. |
| 21 | Material and labour for 100mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) in sub base of flooring or pavings etc., complete all as specified and as directed by Engr-in-charge. |
| 22 | Material and labour for 25mm thick cement concrete type B0, 1:2:4 (Using 12.5mm graded stone aggregate) in sub base of flooring complete all as specified and as directed by Engr-in-charge. |
| 23 | Material and labour for non skid white ceramic tiles 7 to 8mm thick (square /rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 24 | Material and labour for white glazed ceramic tiles in vertical surface 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in cement mortar 1:4 as backing coat on fair faces on stone surface complete all as specified and as directed by Engr-in-charge. |
| 25 | Material and labour for cement concrete type C-1, 1:3:6 (Using 20mm graded stone aggregate) 75mm thick as in plinth protection, pavement etc., and finished the surface even and fair complete all as specified and as directed by Engr-in-charge. |
| 26 | Material and labour for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and as directed by Engr-in-charge. |
| 27 | Material and labour for preparation of newly plastered surface of ceiling, pilasters, cornices and applying three coats of white wash complete all as specified and as directed by Engr-in-charge. |
| 28 | Material and labour for preparing new plastered or unplastered old surface of walls and applying two coats of cement base paint on walls (external) including with alkali resistant priming paint complete all as specified and as directed by Engr-in-charge. |
| 29 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engr-in-charge. (Item 29 of 3(a) (i) + item 2 of 6(d) ) |
| 30 | Removing excavated soils exc 1.5 Km but not exc 5 Km and depositing where directed complete all as specified and as directed by Engr-in-charge. |
| 31 | Material and labour for granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and table top for fixing wash basin and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed by Engr-in-charge. |
| 32 | Supply and fix for framed work such as grills, gratings etc, with ends of bars, shouldered, end or riveted or forged into spikes framed gaured bars barrel iron doors ladders, framed blausters walk ways, raillings, framed water tanks and similar works confirming to Fe 290 Gde-E-165 complete all as specified and as directed by Engr-in-charge. |
| 33 | Material and labour for preparation of new surfaces of steel over 10cm in width or girth with two coats of synthetic enamel paint over coat of primer red oxide primer complete all as specified and as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
| 34 | Material and labour for preparation of new surfaces of steel over 10cm in width or girth with two coats of synthetic enamel paint over coat of primer red oxide primer complete all as specified and as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender