Tender For Railway Track Crossing By Pipe Pushing Method At Km/Tp-66/27-29 & Km/Tp-66/28-30 Between Stations Mxy & Dxn Of East Central Railway (Bomb Minor At Km. 2.925) And Km/Tp-64/29-31 & Km/Tp-64/30-32 Between Stations Mxy & Wdm Of East Central Ra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Oct 2026
13 days left
EMD
7.04 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonbhadra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Railway Track Crossing By Pipe Pushing Method At Km/Tp-66/27-29 & Km/Tp-66/28-30 Between Stations Mxy & Dxn Of East Central Railway (Bomb Minor At Km. 2.925) And Km/Tp-64/29-31 & Km/Tp-64/30-32 Between Stations Mxy & Wdm Of East Central Railway. (Jorukhar Minor At Km. 2.435) For Laying Three Nos. 600Mm Diameter M.S. Carrier Lines With Three Nos. 800Mm Diameter M.S. Casing Pipes For Each Railway Crossing Of Bome Minor And Jorukhar Minor.
BOQ
| Sl. No. | Item Description |
| 1 | Site Clearence for Minor stream including all leads and lifts, labour charges, T&P etc. required for proper completion of work and its disposal as per direction of Engineer-in-charge. |
| 2 | Earth work in excavation of foundation in all types of soil including all leads and lifts, labour charges, T&P etc. required for proper completion of work and its disposal as per direction of Engineer-in-charge. |
| 3 | Manufacturing, providing and supplying spirally welded/ERW/ SAW/fabricated M.S. Pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including freight, insurance, loading/unloading stacking, excluding GST levied by GOI in all respect etc. complete as per IS-3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible) and as per direction of Engineer-in-Charge.800 mm dia M.S pipe 12 mm thick (Casing) |
| 4 | Pushing of M.S. pipe of 800mm dia for Railway crossing by push through method in all types of strata by using hydraulic jack and drilling machine of required diameter, below 4.0m depth including lowering, laying, jointing of M.S. casing pipe including cost of labour fuels and material, required welding machinary, tripod, chain pulley block, crain, blower etc. transportation and dewatering etc. but excluding cost of M.S. pipe 500 to 1000mm dia M.S pipe complete as per direction of Engineer-in-charge. |
| 5 | Providing and applying primer first coat of inertol 49 W emaline 05/58 pipe coat or any other equivalent approved paint to the internal surface of pipe line at site as per direction of Engineer-in-charge. |
| 6 | Providing labours, tools and tackles for testing hydraulic test of laid M.S. Pipe upto 60m head of water all complete as per specification and direction of Engineer-in-charge. |
| 7 | Providing and supplying air valve as per IS-14845-2000 with specification of approved make & quality of 600mm diameters including all taxes, freight, inspection charges, loading/ unloading, transportation upto stores/sites stacking etc. complete in all respect as per direction of Engineer-in-charge. |
| 8 | Lowering, laying and fixing in proper alignment and position all type of air valves including cost of conveyance, cost of all materials and giving satisfactory hydraulic testing etc. comlete as per direction of Engineer-in-charge. |
| 9 | Manufacturing, providing and supplying spirally welded/ERW/ SAW/fabricated M.S. Pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including freight, insurance, loading/unloading stacking excluding GST levied by GOI in all respect etc. complete as per IS-3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible) and as per direction of Engineer-in-charge. 600mm MS pipe 12.0 mm thick (Carieer) |
| 10 | Providing and supplying ISI-marked specials and fittings with SBR rubber sealing gaskets, complete with follower glands and M.S. nuts and bolts (coated or otherwise protected against rusting) suitable for M.S. pipes inclusive of all other charges and applicable taxes as per direction of Engineer-in-charge. |
| 11 | Providing labours, tools, tackles, etc., for laying and jointing pipes in trenches, including electric arc welding of joints using approved electrodes, conforming to relevant IS codes. The scope include the application of protective anti-corrosive coating/ painting at welded joints, providing night guards, safety barriers, and red caution lights to safeguard against accidents, complete in all respects as per direction of Engineer-in-charge. |
| 12 | Providing and laying of local sand in back filling i/c cost of all materials labour, T&P etc. required for proper completetion of work as per direction of Engineer-in-charge. |
| 13 | Laying C.C. 1:3:6 (M-10) in levelling coarse with cement, coarse sand of F.M. not less than 2.00 and stone ballast of size 4.75 to 40mm including cost of all material, labour, T&P etc. required for proper completion of work as per direction of Enginner-in-charge. |
| 14 | Laying RCC 1:1.5:3 (M-20) with cement, coarse sand of F.M. not less than 2.00 and stone ballast of size 4.75 to 20mm including cost of all material, labour, T&P etc. but excluding cost reinforcement, centering and shuttering required for proper completion of work as per direction of Engineer-in-charge. |
| 15 | Centering & Shuttering for R.C.C. work in different parts of structure including cost of all material, labour, T&P etc. required for proper completion of work as per direction of Engineer-in-charge. |
| 16 | Reinforcement including straightening, cutting, bending, binding & placing including cost of binding wire, reinforcement steel materials, labours carriage T&P and taxes etc. required for proper completion of work as per direction of Engineer-in-charge. |
| 17 | Providing and laying of drystone boulder pitching including cost of all labour, material and T&P royalty and all other taxes etc. required for proper completion of work as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender