Tender For Addition/Alteration To Bldg No. P-52 Of Swc Pro Unit At Jaipur Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Nov 2026
18 days left
EMD
83000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Bldg No. P-52 Of Swc Pro Unit At Jaipur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 2 | M & L for rendering 15mm thick on fair faces of brick masonary or concrete surface/ stone masonary using High performance ready mix plaster of grey colour as per manufacturers instructions finished even and smooth w/o using extra cement including scaffolding complete all as specified and directed.Make : Birla Aercom, Ultratech-Readiplast, ACC-Suraksha(101) or equvt as approved by GE |
| 3 | M & L for rendering 10mm thick onconcrete surface of ceiling using High performance ready mix plaster of grey colour as per manufacturers instructions finished even and smooth w/o using extra cement including scaffolding complete all as specified and directed.Make : Birla Aercom, Ultratech-Readiplast, ACC-Suraksha(101) or equvt as approved by GE |
| 4 | M&L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over one coat of primer with alkali resistant priming paint over one coat of wall care putty incl rubbing down complete all as specified and directed. |
| 5 | M&L for preparation of newly plastered surface of walls and applying two coats of premium weather proof acrylic smooth exterior emulsion paint of DULUXE Weather shield Max or APEX ULTIMA of Asian paint or equivalent as approved by GE company depot tinted of approved manufacturers in required colour and shade using hand roller over and including one coat of alkali resistant priming paints and filling holes with wall care putty complete all as specified and directed . |
| 6 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 7 | M&L for complete removal existing old surfaces of wall / ceiling by scrubbing with hard brushing, brooming down or steel wire brushing scraping down smoke root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying two coats of premium weather proof acrylic smooth exterior emulsion paint of DULUXE Weather shield Max or APEX ULTIMA of Asian paint or equivalent as approved by GE including filling of holes with wall putty as required incl necessary scaffolding complete all as specified and directed. |
| 8 | M&L complete removal of existing treatment of old plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over one coat of wall care putty incl rubbing down complete all as specified and directed. |
| 9 | S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples and including supply of wooden beading complete all as specified and as directed |
| 10 | S&F in repair 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed |
| 11 | S&F in repair 250mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 12 | S & F in repair 150mm (overall size of cover plate) size floor door stoper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in bottom of door shutter complete all as specified and as directed. |
| 13 | S&F in repair 200 mm long aluminium anodised barrel tower bolt extruded section and fixed complete all as specified and directed. Please Enable Macros to View BoQ information |
| 14 | S&F in repair 200 mm long aluminium anodised barrel tower bolt extruded section and fixed complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender