Tender For Restoration Of West Jawahar Road From May Fair Gate To Lebong Cart Road Below Zoo Including Road Towards Ropeway, Ward No.29 And 30, Darjeeling.
Tender Value
88.42 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
5 days left
EMD
1.76 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of West Jawahar Road From May Fair Gate To Lebong Cart Road Below Zoo Including Road Towards Ropeway, Ward No.29 And 30, Darjeeling.
BOQ
| Sl. No. | Item Description |
| 1 | PART A |
| 2 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable materails within 50meters lead as per direction of Engineer-in-charge |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Ordinary Cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete |
| 7 | CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 15 mm cement plaster on rough side of single or half brick wall finishedwith a floating coat of neat cement of mix : (1 cement: 4 fine sand) |
| 8 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. |
| 9 | Providing and fixing in position pre-cast RCC manhole cover and frame Rectangular shape 600x450mm internal dimensions |
| 10 | GST Correction Factor @ 0.973 on Subtotal of Part A |
| 11 | Add Cost Index @ 39% on Corected Subtotal of Part A |
| 12 | PART B |
| 13 | Excavation in Soil by Manual Means Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts andlead upto 1000 metres (Reference to MoRT&H's specification clause 301). |
| 14 | Repairing Pot Holes with Bituminous Macadam (Grading-I for compacted thickness of 80mm to 100mm) Filling Pot Holes with Bituminous Macadam using Mobile Mix Plant (6-10 TPH) with approved crushed aggregates of specified grading premixed with bituminous binder @3.3% by wt. |
| 15 | Construction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieve at least 98% of the maximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 desired density, complete as per clause 401 grading-V Material |
| 16 | Prime CoatProviding and applying primer coat with cationic bitumen emulsion SS1 grade conforming to IS:8887 on prepared porous granular surface including Clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502). |
| 17 | Bituminous MacadamProviding and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous binder @ 3.3% (min) for Grading -1 and 3.4% (min) for Grading -2 by weight of total mix , transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504). or Grading II (19 mm nominalmaximum aggregate size) LayerThickness 50mm |
| 18 | Tack CoatProviding and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavementsurface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). |
| 19 | MASTIC ASPHALT 25mm THICKProviding and laying 25 mm thick mastic asphalt wearing course with approved grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumenprecoated fine-grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 100°C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 516 (Reference to MORT&H's specification clause 516 along with IRC:107). |
| 20 | Add GST @ 18% on Subtotal of Part B Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender