Tender For Restoration Of Pipeline Damaged Due To Construction Of Culvert At The Road From Kishorepur Shakuntala More To Jamtala More By The Authority Of Wbsrda Under The Command Area Of Karimpur Jalangi Zone Ix(B) Under Tehatta Sub-Division P.H.E. D
Tender Value
2.62 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
10 days left
EMD
5250
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nadia → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Pipeline Damaged Due To Construction Of Culvert At The Road From Kishorepur Shakuntala More To Jamtala More By The Authority Of Wbsrda Under The Command Area Of Karimpur Jalangi Zone Ix(B) Under Tehatta Sub-Division P.H.E. Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, laying, fiting, fixing and jointing of UPVC pipes conforming to IS:4985-2000 with latest revision and amendments, if any, with necessary UPVC/CI specials, CIDF sluice valves, as per relevant I.S. specification including labour charges for earth work in excavation in any kind of soil including mixed soil with boulder ,road sub-grade and its flanks but excluding moorum and laterite or sand stonehard arock including cutting of brick payment without damaging the existing telephone/electrical cable line etc.(in case of damage of any type of cable line during excavation, necessary damaged charges as applicable by the respaective authority will be borne by the agency in his own cost. Loading, unloading, carrying of pipes, specials, valves from the local store to work site and lowering laying of pipes specials valves carefully in trenches maintaining proper levels and alignment, jointing the pipe and specials including supplying of good quality/approved brand solvent cement (as per IS:14182-1994 including cost of all fabricated PVC fitting i.e. tees,bend, reducers, adopter etc.as per IS:101-1988 and making flange joints including supplying required quantity of nuts, bolts and rubber insertion (CIDF sluice valves will be supplied by the department free of cost) as required at site by adopting suitable method so as to facilate the maintenance of pipe line locally as per conventional method including back filling the trenches with good earth obtained from excavation of trenches including consolidation with watering in layer not exceeding 150mm thk. with maintaining an average depth of cushion of 1.10mtr. from the top of pipe line including making interconnection with distribution pipes etc. all complete as per drawing direction and satisfaction of the E.I.C.N.B. i) Manufacturer’s test certificate for UPVC pipe & specials to be produced before laying of pipe line.ii) 3rd party inspection of UPVC pipe & specials to be done by CEPET or (India) SGS/NTH Kolkata or as per direction of EIC as per approved vender list.iii)No part payment at any stage on account of supply of materials shall be entertained.iv)Payment will be made on actual consumption of materials.v)UPVC pipes for the works to be supplied as per approved vendor list and as per direction & satisfaction of EIC. No pipes will be allowed beyond recommendated vendor list.vi)Submission of drawing of pipe line with statement of materials consumed between node to node points against each R.A. & final bill.if so.vii) Any deviation from required clear cover of 1.10mtr.due to site adverse condition, prior permission is to be obtained from EIC and payment for such work will be made on prorate basis over the rate of entire item.viii) All pipe connection shall be completed in all respect and as per directionof EIC. Decision of EIC in this respect is final & binding. In case of any deviation/or any left out pipe connections an amount of Rs.10,000.00 for each pipe connection will be realized/recovered from the bill.(A) Pressure Rating : Class - III(ii) Laying of pipe line including cost of pipe & fittings/specials but excluding cost of valves. |
| 2 | 75mm (OD) |
| 3 | Filling the pipeline with water, testing hydraulically asper I.S3114-1965 (Article-6) in section of a length not exceeding 500mtr. for head of pressure as per specification including supplying installing and fixing all equipments such as diesel pump set, blank flange, pressure gauge, valve, pressure pump and all other tools and plants including drilling topping and plugging of necessary holes to pipes, blocking ends providing temporary thrust block and subsequent blocking of holes and other jointing materials and dismantling and removal of the same including disposal of water etc. all complete as per specification and direction of EIC. The rate is inclusive of cost of requisite water to be arranged by the contractor (Recovery rate of water @ Rs.10.00/m3, if contractor used water from deptt. source). B) For UPVC/HDPE Pipe |
| 4 | c) 75 mm (OD) |
| 5 | Cleaning thoroughly the inner surface of pipe line including specials and valves by flushing with water and subsequently disinfection of the same pipe line by flushing again with water containing bleaching powder resulting inresidual chlorinenot less than15mg/ltrs. after 24 hrs. of such filling including laboratory testing of water samples obtain from the disinfested pipe line and disposal of water from the pipe line after completion of the work. The rates including of cost of requisite water to be arranged by the contractor) (The rate of water @Rs. 10/m3 may be covered, if the contractor used water from deptt. source).B) For UPVC/HDPE Pipec) 75 mm (OD) |
| 6 | Labour for boring (horizontally) through any kind/type of soil for road crossing of laying distribution system including hire charges and labour for supplying of suitable diameter crossing up to full width of road with necessary tools, tackles including necessary arrangement for boring and pushing required including fitting, fixing, jointing, pumping out accumulated water, lighting arrangement, sealing of two casing ends by B//W (1:4) etc. complete as per direction of ElC.a) 80 mm dia |
| 7 | Supply of G. I. pipes of TATA make including necessary socketsa) 80 mm dia |
| 8 | Dismantling all type of plain cement concrete works, stacking serviceable materials of site and removing rubbish as directed within a lead of 75mtr. for laying all dia pipe line in ground floor, upto 150mm thick. |
| 9 | Filling in foundation or plinth by silver sand inlayers not exceeding 150 mm as directed andconsolidating the same by thorough saturation withwater, ramming complete including the cost ofsupply of sand. (payment to be made on measurement of finished quantity) Do-by fine sand |
| 10 | Ordinary Cement concrete (mix 1:2:4) with graded stonechips (20 mm nominal size) excluding shuttering andreinforcement if any, in ground floor as per relevant IScodes.(Pakur Variety ) |
| 11 | Ordinary Cement concrete (mix 1:1.5:3) with graded stonechips (20 mm nominal size) excluding shuttering andreinforcement if any, in ground floor as per relevant IScodes.(Pakur Variety ) |
| 12 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4 m II. JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL (i) Tor steel/Mild Steel |
| 13 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25mmto30mmthickwoodenshutteringasperdecision&directionofEngineer-In-Charge. |
| 14 | For Existing FHTC with ferrule connection, Refixing of existing ferrule with fittings in the proposed distribution pipeline and supply, fitting & fixing of all other accessories like saddle piece of required size to fit the proposed pipeline, specials, nut & bolts, rubber sheet, washers etc, including cutting trenches in all sorts of soll and filling up trenches as per direction of the Engineer-in charge |
| 15 | Drum sheet walling 1.40m (av.) high on Sal-bullah/ Eucalyptus bullah piling 10 cm dia. And 3.25m long driven 1.75m (av.) below G.L. and 75cm centre to centre including fitting fixing 3 nos. of half bullah pieces (from 10 cm dia) and drum (empty bitumen) sheet (approved condition) of height 1.5m, cutting and straightening drum sheet (each joint must have lap length of min 50 mm) including cost of necessary nails, bolts, nuts etc. and providing 2 to 3m long half bullah ties of 10cm dia. @2.25 m centre to centre fixed with 10 cm dia. bullah posts driven 1.5m below G.L. including cost of all materials and one one coat tarring to all bullah etc. complete as per direction. i) Using Eucalyptus Bullah |
| 16 | Supply of Second hand empty cement bags in good condition |
| 17 | Labour for filling Gunny bags with dry earth, stitising the bag carrying and placingin position all complete. |
| 18 | Earth work in filling in compound tank low land, ditches etc. with good earth in layer not exceeding 150mm. including breaking clods & consolidating the same by ramming & dressing complete.( Payment will be made on profile measurement before and after the work).(ii) With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth. (PWD Schedule of rates |
| 19 | Provision for extra supply and laying of 15 mm NB PVC (schedule 80)/20mm OD HDPE (PE100, PN16) pipe with all necessary specials 1.0 meter below the ground including cutting trenches in all sorts of soil and filling up trenches as per direction of the E.I.C. |
| 20 | Submission of complete detailed drawing of distribution system, rising main etc. after execution of work showing position of different types of valves, fittings/specials sluice valve chamber with location, node to node wise in the sanctioned drawing as completion drawing of the water supply scheme as per direction and satisfaction of EIC. The list of dia wise fitting/specials, different pipes ;of valve used in the rising main should be shown in the completion drawing (not separate) with verified by SAE & AE in-charge of the scheme. The above drawing will be submitted in 5 copies |
| 21 | Add GST @ 18% on total of Sl.No.1.00 to Sl.No.18.00 i.e on Rs.39644.27 |
| 22 | Add Cess @ 1% on total of 1.00 to Sl.No.19.00 + GST i.e on Rs.2598.90 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender