Tender For Provision Of External Power Supply To Rw Sub Division Agalpur Under Rwes Bolangir For The Year 2026-27_Building
Tender Value
9.42 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
11 days left
EMD
9421
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of External Power Supply To Rw Sub Division Agalpur Under Rwes Bolangir For The Year 2026-27_Building
BOQ
| Sl. No. | Item Description |
| 1 | 10mtr 150X150 RSJ GI POLE 34.6KG/M |
| 2 | 55sqmm AAAC |
| 3 | 11KV V-Cross Arm GI (10.2 KG each) |
| 4 | GI Back Clamp for V Cross Arm( 1.7 kg) |
| 5 | 11KV F clamp 2.9 KG each |
| 6 | 11KV Pin insulator polymer |
| 7 | 7/10 SWG stay wire |
| 8 | 8 SWG GI wire (for earthing) |
| 9 | Earthing of support (Coil Type) |
| 10 | GI Nuts,Bolt&Washer |
| 11 | GI Barbered wire for Anticlimbing |
| 12 | Danger Plate |
| 13 | Padding & Concreting material for support |
| 14 | Survey and GIS data for pole |
| 15 | Pole painting under LT/11KV/33KV Network |
| 16 | 75X40X6MM GI channel for straight cross |
| 17 | 11KV (B&S) Disc Insulator polymer-70KN |
| 18 | 11KV B&S Hardware fitting( |
| 19 | PG Clamp for 100sqmm AAAC |
| 20 | 11KV Pin insulator polymer |
| 21 | HT Stay set complete |
| 22 | HT Stay set Insulator |
| 23 | Stay Clamp |
| 24 | 7/10 SWG stay wire |
| 25 | 8 SWG GI wire (for earthing) |
| 26 | GI Nuts,Bolt&Washer |
| 27 | Earthing of support (Coil Type) |
| 28 | Concrete material for stay anchor plate |
| 29 | 8 MTR Long 200KG PSC Pole |
| 30 | Cable 1.1KV AB 3x35+1x25+1x16 sqmm XLPE |
| 31 | POLE clamp |
| 32 | Clamp suspension with eye hook for AB Cable |
| 33 | Eye hook for AB Cable |
| 34 | Neutral Connector |
| 35 | GI Wire Stranded 7/12 swg -7/2.64mm |
| 36 | Line stay clamp for LT |
| 37 | Insulator stay for LT |
| 38 | Earthing coil |
| 39 | Wire GI NO 8 SWG/4.06 MM for Earthing |
| 40 | Bolt & Nut GI 16X55 MM |
| 41 | Piercing connector LT type A |
| 42 | LT stay set complete |
| 43 | Padding & Concreting material for support |
| 44 | Survey and GIS data for pole |
| 45 | Pole painting under LT/11KV/33KV |
| 46 | 9mtr long 300kg PSC Pole |
| 47 | 25 KVA 11/0.4 KV Level-II (amndmnt 4 IS |
| 48 | GI Channel 100x50x6mm |
| 49 | GI Channel 75x40x6mm |
| 50 | GI Angle 50x50x6mm |
| 51 | 11KV Polymer Disc insulator B&S (70KN) |
| 52 | 11KVH/W Fitting for Disc (70KN) |
| 53 | PG Clamp for 100sqmm AAAC |
| 54 | GI Flat 50x6mm |
| 55 | GI Flat 25x6mm |
| 56 | 11KV A/B Switch (400A,3 POLE HZ TYPE) |
| 57 | 11KV HG FUSE (200A,3 POLE ,HZ Type) |
| 58 | 11 KV lighting arrester |
| 59 | Conductor ACSR PVC( 61.7SQ MM) |
| 60 | HT Stay set complete |
| 61 | HT stay insulator |
| 62 | HT Stay Clamp |
| 63 | 7/10 SWG stay wire |
| 64 | 8 swG GI wire (for earthing) |
| 65 | 40 mm nominal bore GI pipe (medium gauge) |
| 66 | Earthing for support (Coil type) |
| 67 | Pipe HDPE 25 MM |
| 68 | Pipe GI (100MM) |
| 69 | 1.1 KV 4CX95 Sqmm XLPE Cable |
| 70 | 1CX95 MM2 LT XLPE Cable (Armoured) |
| 71 | Gland for Arm( 4CX95 sqmm XLPE Cable) |
| 72 | Distribution box with TP MCCB (25KVA) |
| 73 | AI Cable socket 70mm |
| 74 | AI Cable socket 95mm |
| 75 | GI Bolt, Nuts & Washers |
| 76 | GI Barbered wire for Anticlimbing |
| 77 | Danger Plate |
| 78 | Concrete material for stay Anchor plate |
| 79 | Padding & Concreting material for support |
| 80 | Economic Brick Design fencing |
| 81 | Earthing pit for pipe earthing |
| 82 | Pole painting under LT/11KV/33KV |
| 83 | Survey and GIS Data for DTR |
| 84 | Survey and GIS data for pole |
| 85 | SITC of LITHIUM ION BATTERY 100AH 48VOLT. 5YEAR WARRANTY Lithium lon (LiFePO4/LFP) Battery 48V/100Ah-PM (IP65/67 compliant Reverse polarity Temperature cutoff Mechanical locking arrangement Shock absorption Short circuit protection Plug & play battery Overcharge & discharge Cutoff 100% efficient for charge / discharge LCD Display)as per the direction of E.I.C.(Make:-UTL/Loom Solar/Musclegrid solar/Tata power solar/Eq) |
| 86 | SITC of 5 KVA solar Inverter(DSP based unique pure sine wave design. Inbuilt high efficiency MPPT charge controller. Inbuilt AC & DC energy meter with USB based communication. LCD display with all AC and DC parameters. Robust design with reverse AC voltage protection. 20 years of product life &5 years warranty.) as per the direction of E.I.C.(Make:-UTL/Luminous solar/Musclegrid solar/Tata power solar/Eq) |
| 87 | SITC of 630W MONO BI-FICIAL TOPCON SOLAR PANEL (24v, 25year warranty) as per the direction of E.I.C.(Make:-UTL/Loom Solar/Musclegrid solar/Tata power solar/Eq) |
| 88 | Cost for GI STRUCTURE AND INSTALLATION as per the OEM standard and as per the direction of E.I.C.(Make:-UTL/Loom Solar/Musclegrid solar/Tata power solar/Eq) |
| 89 | SITC of Safety device as per the OEM standardand and as per the direction of E.I.C.(ACDB,DCDB,Lightning arrester with Earthing,wire) (Make:-L&T/Havells/Anchor/C&S) |
| 90 | SITC of 400mm Wall fan copper winding with metal blades having air delivery ≥ 70 m³/min. (Make-Usha-Maxx Air Ultra/Polycab-Arey HS/Crompton-WM HiFlowwave/Havells-Accelero HS/Anchor-Altrix HS-OWH/Orient-Wall43/Great White-WYNO WF) with all accessories and connection etc. as required as per direction of Engineer-in-charge, Replacement Warranty will be two years. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender