Tender For Procurement Of Ev Machine And Drives, Demonstration Testing Set Up In Eee Department In Ptu Under The Capital Asset Fund.

Sharing tender

Tender for Procurement Of Ev Machine And Drives, Demonstration Testing Set Up In Eee Department In Ptu Under The Capital Asset Fund. , 1. Pmsm Drive (1 Set) A) Permanent Magnet Synchronous Motor (Pmsm) - 48 V, 1Kw, And 3000 Rpm With Mechanical Loading Arrangement Consists Of Brake Drum, Frame, Belt And Scale. • Rated Speed - 3000 Rpm • Rated Torque - 3.18 N-M • Peak Torque - 5.7 N-M • Rated/Peak Current -22 A /40 A • Sensors - Hall Effect • Maximum Permissible Speed - 3500 Rpm • Insulation : Class F B) Pmsm Closed-Loop Controller - 48 V/60 V Dc, Consists Of Mcb, Fuses, Indicators, Digital Meters And Rpm Meter. The Controller Unit Shall Be A Complete Integrated System Comprising The Following: (I). Controller / Control Unit • The Controller Shall Employ A Suitable Microcontroller, Or Equivalent Digital Control Platform. • It Shall Execute Real-Time Control Algorithms For Pmsm Operation And Regulate The Motor Current, Torque And Speed. • The Controller Shall Provide Suitable Interfaces For Current And Rotor-Position Feedback Sensors. (Ii). Three-Phase Inverter • A Three-Phase Power Inverter (Utilizing Igbts Or Mosfets) That Converts A Dc Link Voltage Into A Variable-Frequency, Variable-Voltage Sinusoidal 3-Ph Ac Supply For The Motor • The Inverter Shall Provide Controlled Switching And Appropriate Protection Against Over-Current, Over-Voltage, Short-Circuit And Other Abnormal Operating Conditions. (Iii). Feedback And Sensing • The Controller Shall Incorporate Phase/Stator Current Sensing For Closed-Loop Current Regulation. • Provision Shall Be Available For Rotor-Position Feedback Using An Encoder, Resolver, Hall-Effect Sensor, Or Equivalent Position-Sensing Arrangement, As Appropriate To The Supplied Pmsm. • The Feedback System Shall Support Accurate Speed, Position And Torque/Current Control Of The Pmsm. 2. Bldc Mid_Drive (1 Set) A) Bldc Mid-Drive Motor, 48 V, 1Kw, 3000 Rpm With Mechanical Loading Arrangement Consists Of Brake Drum, Frame, Belt And Scale. • Rated Speed -3000 Rpm • Rated Torque - 3.18Nm • Peak Torque = 5.7 Nm • Rated/Peak Current -22 A /40A • Sensors - Hall Effect • Maximum Permissible Speed - 3500 Rpm • Insulation : Class F B )Bldc Mid-Drive Motor Controller, 48 V Dc/60 V Dc, Suitable For 1 Kw Bldc Motor. The Controller Unit Shall Consist Of Suitable Mcb/Fuse Protection, Status Indicators, Dc Voltage And Current Digital Meters, And An Rpm Display. The Controller Shall Employ A Suitable Microcontroller Or Equivalent Digital Control Platform It Shall Provide Appropriate Protection Against Over-Current, Over-Voltage, Short-Circuit, Under-Voltage And Over-Temperature Conditions. The Controller Shall Provide Adjustable Speed Control And Shall Be Compatible With The Specified 48 V, 1 Kw Bldc Motor. 3. Srm Drive (1 Set) A) Switched Reluctance Motor-1 Hp, 310V Dc, 2000 Rpm, 8 X 6 Configuration With Position Sensors B) Srm Motor Controller: • Power Circuit: Igbt Based Bridge Type Power Circuit Consists Of Semikron Make Igbt Modules Suitable For Srm Motor, Igbt Drivers, Single-Phase Bridge Rectifier With Filter Capacitor, Necessary Mcb, Snubbers, Heatsink And Fan For Cooling, Analog Dc Voltmeter For Dc Bus Voltage And Analog Dc Ammeter For Dc Current. • Control Circuit: Ti C2000 Launchpad Based Controller For Speed Control Of The Srm Motor, Motor Control, Connector For Sensor Inputs And Pwm Output. Provision For Interface For Control Through Matlab - Simulink 4. Three-Phase Induction Motor Drive (1 Set) A)3-Phase Induction Motor -1000W, 4 Pole, 48V, 1440 Rpm, 3-Phase Squirrel-Cage Type, Foot Mount With Mechanical Loading Arrangement Consists Of Brake Drum, Frame, Belt And Scale Protection: Sturdy Ip54 Housing. • Rated Frequency -50 Hz • Rated Voltage - 48V, 3 Phase • Base Speed - 1440 Rpm • Maximum Speed - 1800 Rpm • Rated Current - 22 A • Frequency Range 10 -60 Hz • V/F Control Capability B) Induction Motor Controller Ti C2000 Launchpad Based Controller For Speed Control Of The Induction Motor By V/F Control, Sic Mosfet Based Power Module, Ic Driver Circuit With Built In Protection Circuit, Single-Phase Bridge Rectifier With Capacitor Filter And Stepdown Transformer, Encoder Coupling For Position Sensor. 5. Dc Power Supply (2 Nos) 24V /48V/60V Dc @ 25A Input: 3 Phase 415V, Mcb, Fuses, Indicators , Controls And Digital Multifunction Meter