Tender For Construction Of 300Sqm Capacity Naturally Ventillated Poly House At Progeny Farm Jirkatang.
Tender Value
16.04 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
3 days left
EMD
32098
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 300Sqm Capacity Naturally Ventillated Poly House At Progeny Farm Jirkatang.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 7 | Foundations, footings, bases for columns |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 9 | Hot finished welded type tubes |
| 10 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 11 | 110 mm diameter |
| 12 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. |
| 13 | Coupler (i) 110 mm |
| 14 | Single tee without door (i) 110x110x110 mm |
| 15 | Bend 87.5° (i) 110 mm bend |
| 16 | 12 mm cement plaster of mix: |
| 17 | 1:4(1 cement: 4 fine sand) |
| 18 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: |
| 19 | Two or more coats on new work |
| 20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 21 | 20 mm nominal dia Pipes |
| 22 | 25 mm nominal dia Pipes |
| 23 | 40 mm nominal dia Pipes |
| 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 25 | Providing and fixing 200 GSM anti fungal UV treated poly film of approved quality and make and fixing it on the roof as per the requirement. |
| 26 | Providing and fixing UV treated 40 mesh insect proof nylon net5 of approved quality and make and fixing it on the gable side and wall area. |
| 27 | Providing and fixing shadnet 70% UV treated of approved quality brand and make and fixing it on the roof as per the requirement. |
| 28 | Proc\viding and fixing 3mm wide of Aluminum channel and zig zag spring and fixing it with UV films as per requirements. |
| 29 | Providing and installation of 1 HP hi flow pump of approved make and model with suction and delivery 25*25mm including PVC suction pipe with fittings. |
| 30 | Providing and installation of single phase 11A, 220V, 50hz electric semi automated starter of approved make and as per the requirement. |
| 31 | Providing and installation PVC-28 PH mini sprinkler with adapture. |
| 32 | Providing and installation of fogger assy having capacity 28 ltr per hour |
| 33 | Providing and fixing of MSP Ball valve of approved make quality and make on the main line 40mm dia. |
| 34 | Providing and installation of 16mm LDPE leteral pipe with all fittings and accessories for fixing fogger assy. |
| 35 | Providing and laying of PVC pipe |
| 36 | 110mm |
| 37 | 40mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender