Tender For C/ O State Election Commisson Office Building,Chotta Shimla, Shimla, (Hp). (Sh:-Providing Fire Fighting System Therein)
Tender Value
5.87 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
4 days left
EMD
12000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for C/ O State Election Commisson Office Building,Chotta Shimla, Shimla, (Hp). (Sh:-Providing Fire Fighting System Therein)
BOQ
| Sl. No. | Item Description |
| 1 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. MAKE:-Attack Fire,Omex, Newage Bomday,FGE,Ceasefire or as approved by Engineer-in-charge. |
| 2 | 100 mm nominal bore |
| 3 | 80 mm nominal bore |
| 4 | 25 mm nominal bore |
| 5 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required . Make: Attack Fire,Omex, Newage Bomday,FGE,Ceasefire Minimax or as approved by Engineer in charge |
| 6 | 2 way Fire Inlet |
| 7 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in allrespects, as required: (Terrace Pump) |
| 8 | (a) Horizontal type, Mono block pump set, cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 |
| 9 | b) 10 HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. |
| 10 | (c) M.S.fabricated common base plate, coupling, couplingguard, foundation bolts etc.as required. |
| 11 | 900 lpm at 35 m Head |
| 12 | Supply, installation, testing and commissioning of Pressure switch for fire pumps of approved make,including necessary wiring and cut off valve up to central panel & other material as described inspecifications .MAKE DANFOSS/INDFOS/DELTA CONTROL or as approved by Engineer in charge. |
| 13 | Providing and fixing of 100 mm dia bourdon type pressure gauge having range 0–20 kg/cm², bottom entry, with brass/SS internals, including nipple, socket, reducer, PTFE tape and other accessories required for installation,calibration and commissioning of pressure gauge complete in all respects as required. Make: Attack Fire,Omex, Newage Bomday,FGE,Ceasefire or as approved by Engineer in charge. |
| 14 | Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make: SANT/ZOLOTO/KARTAR/ KIRLOSKAR/LP or as approved by Engineer in charge. |
| 15 | 100 mm dia. |
| 16 | 65 mm dia. |
| 17 | Providing and fixing Cast Iron dual plated Check Valve (NRV) horizontal type with SS seat non-return valve confirming to class - I including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table \\"E\\" and specifications as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 18 | 100 mm dia. |
| 19 | Providing & Fixing of wall mounting (Compect) swinging type first aid fire hose reel with drum, hanging bracket, 30 Mtr. length x 20 mm dia high pressure hose reel tubing as per IS: 444 with gun metal (GM) shut off nozzle having 5 mm dia orifice. The hose reel connection from Riser to hose reel, sockets, nipples, elbows and ball valve (25 mm dia). Drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block as and when required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:Attack Fire,Omex, Newage Bomday,FGE,Ceasefire or as approved by Engineer in charge |
| 20 | Providing, fixing of 63 mm dia,15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Stainless steel male & female instantaneous type coupling (IS 903), including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make:Attack Fire,Omex, Newage Bomday,FGE,Ceasefire. or as approved by Engineer in charge. |
| 21 | Providing and Fixing SS 63 mm dia instantaneous pattern branch short pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Attack Fire,Omex, Newage Bomday,FGE,Ceasefireor as approved by Engineer in charge. |
| 22 | Supplying, fixing and testing of hose cabinet of size 750mmX600mmX 250mm made of 18Swg thick MS sheet with 4mm thick glazed glass doors Double Door i/c necessary locking arrangements suitable to accommodate 2nos- 15mtr long hose pipe, 1no- branch pipe, mounted on the wall OR raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect as required. Make:Attack Fire,Omex, Newage Bomday,FGE,Ceasefire or as approved by Engineer in charge. |
| 23 | Supply, installation, testing & commissioning of : Gun metal / S.S ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type 'A') MAKE: Attack Fire,Omex, Newage Bomday,FGE,Ceasefire |
| 24 | Supplying, fixing and testing of hose cabinet of size 500mmX500mmX 400mm made of 18Swg thick MS sheet with 4mm thick glazed glass Door i/c necessary locking arrangements suitable to accommodate 2 way inlet, mounted on the wall OR raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect as required. Make: Attack Fire,Omex, Newage Bomday,FGE,Ceasefire |
| 25 | Supply, Installing, testing and commissioning of 25mm dia gate/ball valve with all accessories as requried.Make Attack Fire,Omex, Newage Bomday,FGE,Ceasefire as approved by Engineer in charge. |
| 26 | Providing and fixing of 25mm GUN METAL AIR RELEASE VALVES threaded ends complete as per specifications.Make Attack Fire,Omex, Newage Bomday,FGE,Ceasefire) or as approved by Engineer in charge. |
| 27 | Supply, installing, testing and commissioning of sheet steel/MS floor mounting automatic control panel having suitable size for control (relay (18-25 amp) of 1 nos. booster pumps 10HP with three phase supply system,overload relay,presuure switch for Auto on/off, incoming voltmeter with selector switch and fuses.complete in all respects with best satisfaction of Engineer in charge |
| 28 | Providing and fixing Providing & fixing of IS marked (IS:15683) portable fire extinguisher, 4.5 kg carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 29 | Providing and fixing 6 kg. ABC Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 30 | Supplying, installation, testing and commissioning of 5000 litres capacity rotational moulded polyethylene water storage tank , triple layer, UV stabilized, complete with inlet, outlet, overflow and washout connections and all accessories required for proper installation and operation complete with necessary connections, testing as required. Make: Attack Fire,Omex, Newage Bomday,FGE,Ceasefire as approved by Engineer in charge. |
| 31 | Supply, installation and testing & comminssioning of Supply of AUTOGLO Self Maintain Signages 1 mm thick Eco Sheet Dark Glow Photoluminescent with Strong GP Self Adhesive , Working temperature -10 to+60’C Life, Class - A / DIN 67510 Part 2 / 60 Minutes / > 700 mcdl For A Glow Period > 24 Hrs complete in all respects as required with best satisfaction of Engineer in charge. |
| 32 | Exit Sign single sided Size: 250X50 |
| 33 | Fire Extinguisher / MCP sign Size: 150X100 |
| 34 | Core cutting hole work involving making holes in concrete and other structures using a diamond core cutter to create openings for pipes, ducts, wall etc. The purpose of the cutting (e.g., for laying pipes, structural reinforcement, or testing), materials to be cut (RCC slabs, walls), the maximum thickness of the material 25mm to 150mm , the inclusion of labor, scaffolding, and any necessary reinforcement, as well as the specifications for the core cutting machine and bits themselves including repairing etc. complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender