Tender For Construction Of Malkhana At Bamra Of Bamra Wl Range Under Bamra Wl Division
Tender Value
13.94 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
1 days left
EMD
13941
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Malkhana At Bamra Of Bamra Wl Range Under Bamra Wl Division
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation of foundation in hard or gravelly soil within initial lead of 50m and initial lift of 1.5m including dressing the sides, leveling the bed and depositing the excavated materials away from the work site, shoring etc if required, complete the item of work in all respect as per direction of the Engineer-in-charge. |
| 2 | Filling foundation and plinth with filling sand laying in layers including ramming, watering, compacting including cost, conveyance and royalty of sand from approved quarry and other . if any with all leads, lifts, T&P etc complete the items of work in all respect as per specification and direction of Engineer in charge. |
| 3 | CC (1:4:8) using 40 mm size and down graded crusher broken HG stone metal free from weathered surface of approved quality from approved quarry in foundation and plinth including laying concrete in layers with due compaction, watering and curing including cost, conveyance, royalty and . of all materials with all lead, lifts and delifts, T&P etc required for completion of the work in all respect as per direction of the Engineer-in-charge. |
| 4 | RCC work of M-20 grade with 20 mm and down grade black hard granite chips including cost, conveyance, royalty and all . of all materials with all leads, lifts, T&P etc including rigid and smooth centering, shuttering and dismantling the same after the curing of RCC work for 28 days complete the item of work in all respect as per specification and direction of Engineer-in-charge. |
| 5 | Column base & Footing |
| 6 | Plinth Bend |
| 7 | Column & Beam |
| 8 | Lintel Bend |
| 9 | Chhaja |
| 10 | Supplying, straightening coiled or bent up MS rods including cutting, bending and welding if required and tying the grills, laying and placing in proper position as per design including cost, conveyance, , . etc of tested MS/TS rod with testing data of required specification & cost of binding wires of 18 to 20 gauge, labour, T&P required for the work complete and as per the specification and direction of the Engineer-in-charge. |
| 11 | Brick work with Fly Ash Brick in cement mortar (1:6) in foundation & plinth including cost, conveyance, royalty, . of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge. |
| 12 | Brick work with Fly Ash Brick in cement mortar (1:6) in superstructure including cost, conveyance, royalty, . of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge. |
| 13 | Supplying of MS grill gate, MS angle chowkhat of approved specification for doors and windows welded with MS sheet shutters of 18 to 20 gauge thick, openable and electrically welded with all necessary fittings including cost of all materials, labour, T&P, transportation to worksite etc all complete in all respect. |
| 14 | Labour for fitting and fixing of MS doors and windows, MS grill gate as per approved design & all complete. |
| 15 | 12mm thick cement plaster (1:6) in cement mortar finished smooth surface on brick wall after racking out joints including watering curing to required period including cost conveyance, royalty of all materials, T&P complete etc. as per specification and direction of Engineer in charge. |
| 16 | 16mm thick cement plaster (1:6) in cement mortar finished smooth surface on brick wall after racking out joints including watering curing to required period including cost conveyance, royalty of all materials, T&P complete etc. as per specification and direction of Engineer in charge. |
| 17 | Painting two coats of synthetic enamel paint over a coat of primer of approved quality, brand and shade including smoothening the surface by sand paper and filler etc complete with cost, conveyance, royalty, . of all materials, labours T&P required as per specification and direction of Engineer-in-charge. |
| 18 | Finishing to walls with two coats weather coat over one coat primer after finishing wall surface of wall with cement based wall putty (water based) and weather coat paint of approved brand and approved colour including cleaning the surface with cost, conveyance, royalty . of all materials labour T&P and scaffolding as required for the work and as per specification and direction of Engineer-in-charge. |
| 19 | Finishing to Distempering wall with distemper over one coat primer after finishing wall surface of wall with cement based wall putty (water based) and weather coat paint of approved brand and approved colour including cleaning the surface with cost, conveyance, royalty . of all materials labour T&P and scaffolding as required for the work and as per specification and direction of Engineer-in-charge. |
| 20 | Hoisting Joists and truss with cost of all material with cost, conveyance, royalty . of all materials labour T&P and scaffolding as required for the work and as per specification and direction of Engineer-in-charge. |
| 21 | Cement concrete in cm (1:2:4) using 12 mm size h.g.c.b. chips free from weathered surface of approved quality from approved quarry in foundation and plinth including laying concrete in layers with due compaction, watering and curing including cost, conveyance, royalty and . of all materials with all lead, lifts and delifts, T&P etc required for completion of the work in all respect as per direction of the Engineer-in-charge. |
| 22 | Supplying,fitting & fixing of PPGL Sheet in room with all cost, carriage, royality etc. complete. of all materials with all lead, lifts and delifts, T&P etc required for completion of the work in all respect as per direction of the Engineer-in-charge. |
| 23 | 1) Surface/recessed wiring to light point with ISI marked 1.5 Sq.mm PVC S/C Al multistand copper wire in 20 mm dia PVC conduit and S/F of 5A switch mounted on M.S. Board (a) Short Point- 2 Nos. , (b) Medium Point - 2 Nos. (c) Long Point - 2 Nos. 2) Surface/recessed wiring to 5 pin 5A plug point with ISI marked 1.5 Sq.mm PVC S/C Al multistand copper wire in 20 mm dia PVC conduit and S/F of 5A flush type socket with switch mounted on M.S. Board (a) On existing board 3) Surface/recessed wiring to sub main with S/F of ISI marked 2 x 2.5 Sq.mm PVC S/C Al/Copper wire in 20mm dia PVC conduit 4) S/F of ISI marked BK angle holder with shade out without bulb 5) S/F of ISI marked 6A M.C.B with busbar (a) 2 way 6) S/F of 15w LED bulb Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender