Tender For External Painting And miscellaneous Repair Work Of 5Kc-Dot Te Bldg. And Old M/W Bldg. At Basti.
Tender Value
5.36 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
5 days left
EMD
10736
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Basti → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for External Painting And miscellaneous Repair Work Of 5Kc-Dot Te Bldg. And Old M/W Bldg. At Basti.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 3 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 4 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 5 | 125 mm |
| 6 | 12 mm cement plaster of mix : |
| 7 | 1:6 (1 cement: 6 fine sand) |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 9 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 11 | One or more coats on old work. |
| 12 | French spirit polishing : |
| 13 | One or more coats on old work. |
| 14 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 15 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 16 | Welding of brocken M S items such grills, door & window frames and pivots etc complete as per direction of Engineer in charge |
| 17 | Cartage of welding machine from shop to site and sending back from site to shop including hire charges all complete as per directions of the Engr. In charge. |
| 18 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 19 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 20 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 21 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 22 | Refixing old glass panes with putty and nails . |
| 23 | Disposal of malba out of compound upto municipal dump by mechanical means i/c loading and unloading complete as per directios of the Engineer in Charge. |
| 24 | Uprooting and cutting plants grown on the walls of buildings i/c dismentling brick work wherever required and making the same good complete as per directios of the Engineer in Charge. |
| 25 | Providing unskilled labour as required basis. |
| 26 | Providing skilled labour as required basis. |
| 27 | Cleaning of kota stone in dado upto hight of 6.0 m by rubbing with cloth using Harpic and other washing detergent then polishing as per direction of E_in_Chanrge. |
| 28 | Providing and applying Epoxy passivate coat of Dr. Fixit Epoxy zinc primer of approved equivalent over exposed, cleaned, new/old reinforcing bars to provide a continuous film around the reinforcing bar as per manufacturer's specifications and as per the direction of Engineer-in-charge. (Area of the RCC surface as before the application of treatment is to be measured for payment.) |
| 29 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 30 | 25 mm average thickness |
| 31 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 32 | Bars upto 12 mm diameter |
| 33 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
| 34 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer |
| 35 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. |
| 36 | Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 37 | 12 mm average thickness. |
| 38 | 25 mm average thickness in 2 layers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender