Tender For Contract Regarding Fabrication Jobs On Schedule Rates
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Oct 2026
2 days left
EMD
5000
Bank guarantee accepted
Document Fee
100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jind → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Contract Regarding Fabrication Jobs On Schedule Rates
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, Fabricating & erection from M.S plate in size 5mm to 8mmM.S Pipe |
| 2 | M.s Bends |
| 3 | Tee Nipple |
| 4 | Cone & Reducer |
| 5 | Vessels |
| 6 | Patch work |
| 7 | Replacement & Erection of any size M.S pipe line up to 12” (Readymade Pipe) |
| 8 | Replacement & Erection of any size M.S pipe line 14” to 24” (Readymade Pipe) |
| 9 | Replacement & Erection of any size M.S pipe line above 28” (Readymade Pipe) |
| 10 | Replacement & Erection of any size M.S flange |
| 11 | Replacement & Erection of any size M.S bends |
| 12 | Fabrication , erection & replacement of any size M.S bend from M.S pipe up to 12” |
| 13 | Fabrication , erection & replacement of any size M.S bend from M.S pipe above 12” |
| 14 | Fabrication , erection & fitting of M.S cross from M.S pipe up to 6” |
| 15 | Hand Hole connection nipple in fabricated valve up to 10” complete with bend & flange |
| 16 | Replacement & Erection of any size valves fitting |
| 17 | Fabrication , erection of reducer from any size |
| 18 | Fabrication , Erection of any size Blind |
| 19 | Fabrication , Erection of any size Tee/ Nipple (M.S) having size up to 14” |
| 20 | Fabrication , Erection of any size Tee/ Nipple (M.S) having size above 14” |
| 21 | Evaporator Body Tube Dismantling (complete dismantling of tubes of complete calandria) |
| 22 | Complete Evaporator Body Tube fitting with hydraulic testing (complete fitting of tubes of complete calandria) |
| 23 | Juice Heater Tube Dismantling (complete dismantling of tubes of complete calandria) |
| 24 | Juice Heater Tube fitting with hydraulic testing (complete fitting of tubes of complete calandria) |
| 25 | Fabrication of Beds and erection of pumps having up to 20 H.P motor with it’s alignment . |
| 26 | Fabrication of Beds and erection of pumps having above 20 H.P motor with it’s alignment. |
| 27 | Dismantling, Fabrication & erection of coil for any equipments |
| 28 | Fabrication & erection of I.B.R Pipe lines |
| 29 | Erection of I.B.R Bends |
| 30 | Erection of I.B.R Flanges |
| 31 | Erection of I.B.R Valves |
| 32 | Replacement of Molasses tank worn out sheets |
| 33 | Dismantling and shifting of any type of scrap items in scrap yard. |
| 34 | Labour supply (per day 8 hours basis)As per Requirement |
| 35 | As per Requirement |
| 36 | As per Requirement |
| 37 | As per Requirement |
| 38 | C.I / F.R.P cross (Readymade) fitting |
| 39 | Dismantling, Fabrication & erection of any size M.S gutter |
| 40 | Replacement & Erection of S.S pipes having size up to 12” |
| 41 | Replacement & Erection of S.S Readymade Flange having size up to 12” |
| 42 | Replacement & Erection of S.S Readymade Bends having size up to 12” |
| 43 | Fabrication , erection & replacement of S.S Bend from S.S pipe having size up to 12” |
| 44 | Fabrication , erection of any size Tee/Nipple of S.S having size up to 14”. |
| 45 | Dismantling, Fabrication & erection of Main Hole upto 24” |
| 46 | Dismantling, Fabrication & Erection of double beat valve 6’’ of juice heater no.5 alongwith it’s related connections and flanges as per our existing size, design and drawing.Valve size = 6” & Pipe size 6” |
| 47 | Dismantling, Fabrication & Erection of Sulphur Gas Coolers (Dia 900 mm x height 1770 mm) as per our existing size & design including 05 nos. of cooling bottles (size 5” dia x 1.5 mtr. length approx.) complete in all respect of Sulphur furnace. |
| 48 | Dismantling, fabrication, erection and commissioning of Square Bar alongwith its partition plate of bottom header of Juice Heater no.1 as per our existing design & drawing as well as complete hydraulic testing of the bottom side of Juice Heater no.1 after completion of this work. |
| 49 | Dismantling, fabrication, erection and replacement of Agitator of vacuum filter no.1 having size 8’x16’. Size of Angle- 65mm x 65mmThickness – 06 mm.Length – 05 mtr approx. |
| 50 | Dismantling, fabrication, erection and replacement of after burner cooler of sulphur Furnace no.2 as per our existing design and drawing. Burner pipe Dia- 600mmBurner Height- 750mmConnection nipple- 250mm & 100 mm |
| 51 | Dismantling, fabrication, erection and replacement of Drum tray of vacuum filter no.1 having size 8’x16’. Thickness – 06 mm.Drain Nipple Connection- 06”Length – 05 mtr approx. |
| 52 | Dismantling, fabrication, erection and replacement of Primary cooler of sulphur Furnace no.1 as per our existing design and drawing. Jacket pipe Dia- 600mmJacket Height- 1800mmCooling Bottle jacket dia – 300mmCooling bottle size- 200mmConnection nipple- 200mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender