Tender For Repair To Chhajja Parapet Grouting Plaster And Other B/R Items Of Age B/R-Ii Under Ge Roorkee.
Tender Value
50 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
11 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Chhajja Parapet Grouting Plaster And Other B/R Items Of Age B/R-Ii Under Ge Roorkee.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed. |
| 2 | Material and Labour, for pre-painted, galvalume aluminium zinc coating GI based profiled steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa AZ-150, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 3 | S&F 0.50mm thick pre-painted galvalume zinc coated GI based plain sheet of any colour having tensile strength of 550 Mpa, AZ-150 fixed as in roof covering/ cladding to wall, ridges, valley gutter etc with self tapping screws complete all as specified and directed. |
| 4 | M&L for PCC (1:2:4) Ty B-0 using 12.5mm thick course aggregate as in PCC Gola, hold fast cills/steps/coping etc complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 6 | Material and Labour for Steel tubular Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to I. S.1161- 1979 grade Fe-290 (GdeSt.-165 complete all as specified and directed. |
| 7 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, ccomplete all as specified and directed. |
| 8 | M&L for Providing and fixing tiled false ceiling of designer tiles (high pressure steam Cured) of 4 mm thickness (as per IS:14862) of size 595x595mm and approved design in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick MS powder coated/GI sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick MS powder coated/GI sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ‘T’ runner to be suspended from ceiling using GI soffit cleats/by using dash fastners to RCC lintel or slabs/ by welding MS cleats of suitable size on truss/purlin/rafters” GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, at all heights as per directions complete all as specified and directed. |
| 9 | S&F 4 to 5 mm thick PVC sheet Hallow /Sandwich wall paneling any pattern,colour,plain, wood grained consisting of inclusive of solvent cement and fixing at site on PVC frame(L & U ) complete all as specified and directed. |
| 10 | Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) including Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 11 | Material and labour for except brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) including Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 12 | M&L for 15 mm thick rendering in cement mortar (1:6) using coarse sand on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) including Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 13 | M & L for 15 mm thick rendering(in two coat first coat 10mm and another coat of 5mm) on wall/concrete surface with cement mortar( 1 : 4 ) mixed with water proofing compund finished even and smooth (without using extra cement) including Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.Note:WPC should be paid Saprately. |
| 14 | M & L for 15 mm thick rendering(in two coat first coat 10mm and another coat of 5mm) on wall/concrete surface with cement mortar( 1 : 4 ) mixed with water proofing compund finished even and smooth (without using extra cement) complete all as specified and directed.Note:WPC should be paid Saprately. |
| 15 | M&L for rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair including Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 16 | Supply only Liquid water Proofing Compound |
| 17 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 18 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer by automatic air spray machanie complete all as specified and directed. |
| 19 | M&L for preparing newly plastered surface of wall and applying two coats of oil bound distemper by using roller complete all as specified and directed |
| 20 | M&L for preparation of old decorated surfaces (plastered/un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on ceiling complete all as specified and directed. |
| 21 | M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper, by using roller over and including a coat of 1 mm thick wall care putty with preparation of plastered surfaces complete all as specified and directed. |
| 22 | M&L for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coat of cement base paint by automatic air spray machanie inluding one mm thick cement base putty complete all as specified and directed. |
| 23 | Taking down old U/S wooden /steel chowkhat with shutter nexc 1.50 sqm each and removing from site. complete all as specified and directed. |
| 24 | All as per item No. above but exc 23 and nexc 4 sqm |
| 25 | Taking downold U/S shutters of any description exc 1 sqm and n exc 2 Sqm each and removing from site complete all as specified and directed. |
| 26 | Taking down shutter from the frame of any discription n exe 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed. |
| 27 | M&L for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, tower bolt complete with glazing bars, dovetailed or welded including soap coat complete all as specified and directed. |
| 28 | M&L for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, towe bolt complete with gauzed bars, dovetailed or welded including soap coat complete all as specified and directed. |
| 29 | M&L for Steel ventileter with top hung shutters including projecting type hinges with MS handle, and MS peg stay, including tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 30 | S&F framed work such as grills gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars barred iron doors, door chowkat , ladders; framed balusters; walk ways; railings; framework of water tanks, hold fast, sheet and similar work conforming to Fe-410-0 or Fe 310-0 |
| 31 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification of drawing complete all as specified and directed. |
| 32 | M&L for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed. |
| 33 | S&F 30 mm thick Flush shutters, solid core construction, with blockboard core and plywoodface panels, commercial type on both sides is covered with decorative face veneer with lipping/frame to match complete all as spcified and directed |
| 34 | S&F factory made 30mm thick 2nd class hard wood glazed and skelton shutter (two or more panel) single or double leaf open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed. |
| 35 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed. |
| 36 | Cutting holes in brick walls exc half bk wall but n exc one bk wall built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts and making good dismantalled portion in CM (1:3) or cement concrete (1:2:4) type B1 as required. complete all as specified and directed. |
| 37 | S&F in repairs 100 mm size medium grade MS butt hinges complete all as specified and directed |
| 38 | S&F in repairs 150 mm long Aluminium handles, cast type, conplete all as specified and directed. |
| 39 | S&F in repairs Aluminium barrel tower bolt of extruded section 150 mm long conplete all as specified and directed. |
| 40 | S&F in repairs 300mm long Aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 41 | S&F in repair mild steel stove enamalled black 300 mm,size ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 42 | S&F in reapirs for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed. |
| 43 | S&F for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed. |
| 44 | Hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as specified and directed. |
| 45 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed. |
| 46 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beds size 2 mm to 3 mm size complete all as specified and directed. |
| 47 | M&L for Preparing New/Old steel surface of any description over 10 cm width girth not otherwise describe and applying two coat of synthethic enamel paint over a coat of red oxide complete all as specified and directed. |
| 48 | M&L for applying two coat of synthetic enamel paint In new/Old surface over a coat of pink primer on wooden surface exceeding 10 cm in width or girth including preparation of surfaces and including necessary sacffolding complete all as specified and directed. |
| 49 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and directed. |
| 50 | S&F 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including Taking up or down 15 mm bore steel tubing and connections, complete all as specified and directed |
| 51 | S&F 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including Taking up or down 20 mm bore steel tubing and connections, complete all as specified and directed |
| 52 | S&F in repair Origin LED touch sensor circular/saqure/req shape glass wall mounted light mirror for bathroom(24 inch)of selected quantity to wodden pligs with chromium plated brass screw and cup washers complete all as specified and directed |
| 53 | S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete all as specified and directed. |
| 54 | S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed. |
| 55 | S&F in repairs PVC syphon complete for low level flushing cistern complete all as specified and directed. |
| 56 | Repair only to CP long body bib taps , pillar tab etc of any make by replacing spindle,nippule ,washer etc at any size etc complete all as specified and directed. |
| 57 | S&F in repair Door Seal length of each door seal is equal to width of door fixed to door bottom rail including all fixing arrangement such as screws ,nails etc complete all as specified and directed. |
| 58 | Demolition of concrete of any description in any position a complete all as specified and directed. |
| 59 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed |
| 60 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. all as specified and directed |
| 61 | M&L for 75 mm thick PCC 1:3:6 as in plinth protection surface finish even and smooth without using extra cement complete all as specified and directed. |
| 62 | M&L for coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc.o.06 sqm n exc.,0.18 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in cm (1:6) complete all as specified and directed. |
| 63 | M&L for glazed ceramic tiles 450x350x/6/7/350x250x7/300x600x7mm thick coloured tiles on walls such as skirting and dado and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick in cm (1:4) backing coat complete all as specified and directed. |
| 64 | S&F Vitrified Ceramic tiles 7 to 8 mm thick light shade / drak shade (square/rectangular) polished, area of each tiles exc0.18 sqm n. exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cm 1:6 complete all as specified and directed |
| 65 | S&F Vitrified Ceramic tiles 7 to 8 mm thick light/dark shade (square/rectangular) polished, area of each tiles exc0.18 sqm exc 0.36 Sqm, in vertical surface such as skirting and dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 10 mm thick back plaster in cm 1:4 complete all as specified and directed. |
| 66 | S&F Vitrified Ceramic tiles 7 to 8 mm thick light shade / drak shade (square/rectangular) polished, area of each tiles exc0.42 sqm n. exc 1.0 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cm 1:6 complete all as specified and directed |
| 67 | S&F Vitrified Ceramic tiles 7 to 8 mm thick light/dark shade (square/rectangular) polished, area of each tiles exc0.42 sqm exc 1 Sqm, in vertical surface such as skirting and dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 10 mm thick back plaster in cm 1:4 complete all as specified and directed. |
| 68 | M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base 20mm thik screed bed in bedding layer in cm 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the the slab including grinding, rubbing and polishing , complete all as specified and directed. |
| 69 | M&L for machine cut kota stone slab 18-20mm thick in risere of step, skirting, dado and piller over cement screed base 10 mm thik 1:4cm laid and jointed with grey cement slurry mixed with pigment to match the shadeof the the slab including grinding ,rubbing and polishing complete including dismantling of existing kota stone skirting with cm backing plaster complete all as specified and directed. |
| 70 | M&L for PCC 1:4:8 type D-2 (40mm crushed stone aggt)as in foundation , flooring sub base, mass concrete complete all as specified and directed |
| 71 | M&L for 18 to 20mm thick marble stone as in platforms / counter slab/flooring and laid in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 72 | M&L for 25 mm thick PCC (1:2:4) Type B-1 20 mm stone aggt as in sub floor /roof/chajja complete all as specified and directed. |
| 73 | M&L for for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 74 | M&L for repair to RCC chajja (irrespective size) by cleaning, replastering in cement mortar 1:3 mixed with integral water proofing compound over 40mm thick( average ) PCC padding in CM 1:2:4 Type B-O (mixed with water proofing compound) to a required gradient or slope as directed by Engr-in-Charge and the plaster will extended upto 300mm on wall/roof surface to avoid leakage/seepage. Junction of old and new plaster will be well bonded with application of water proofing compound. Drip course or groove of siae 25mm x 4mm will be provided at the edge of bottom surface of the chajja. (Note:- Rates for cement plaster, WPC, PCC and formwork and specilist labours etc required for full completion of item shall be deemed to be included in the rates quoted against this item of BOQ by the contractor). |
| 75 | Providing and fixing Double Rollers blinds utilize two layer of fabric, quality of approved make fabric made of 100% polyester woven fabric thickness 0.40mm with Acrylic coating resistance to Cracking & Fraying and treated for dust repellency, UV proof , virtually maintenance free having plastic bottom chain thickness of chain-0.50mm and diameter-3mm, Plastic with metal bottom weight - 116.20mmX48.30mm and suitable coating on exterior, including all fixtures and fittings complete in all respect as per design/color/shade including requisite installation brackets etc as required for installation at site with anchoring arrangements complete all as specified and directed. |
| 76 | S&F factory made UPVC white colour casement (Openable) window of size area exc 1.00 sqm but nexc 2.00 sqm made of extruded profiles with wall thickness of 2.3mm (+–0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware. EPDM gasket 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of 'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and directed. |
| 77 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion(where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed (Glass shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this accountshall be made. |
| 78 | S&F in repair stainless steel curtain rod cut to size and fixed in position including brackets fixed to wallcomplete all as specified and directed. |
| 79 | M&L for mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender