Tender For special Repair/ Conversion Of Old Vintage Ci/Gi Pipe Line To Di/ Gi Pipe Line At Sulva Line At Ghunghora Under Age E/M-I Of Ge Dehradun..
Tender Value
46.54 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
10 days left
EMD
93080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair/ Conversion Of Old Vintage Ci/Gi Pipe Line To Di/ Gi Pipe Line At Sulva Line At Ghunghora Under Age E/M-I Of Ge Dehradun..
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | M&L for excavation in trenches in any type of soil not exceeding 1.5 Meter wide and not exceeding 1.5 Meter deep in any type of soil including cutting in slopes etc for laying of pipe line including getting out, complete all as specified and directed. |
| 3 | M&L for returning, filling in, including spreading, leveling, watering and well ramming in layers in soft / loose soil not exceeding 25 cm in each layer complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for removal of excavated material (Soil) to a distance up to 50 Meter from starting point and depositing where directed at level not exceeding 1.5 Meter above as directed by Engineer-in-Charge. |
| 5 | Supply, Laying, fixing & testing galvanished iron water tubing 'medium grade; ISI marked with and inclduing all GI fittings such as flanges, unions reducers sockets, socket reducing bends , elbows, tees, checkneuts, caps, plugs etc laid in trenches for the following sizes complete all as specifed and directed. |
| 6 | (a) 80 mm bore |
| 7 | (b) 50 mm bore |
| 8 | (c) 20 mm bore |
| 9 | Dismantling/taking out defective Gun metal gate valve and S&F for Gun metal gate valve with iron wheel head by screwing/cutting of existing pipe lines for the following size complete all as specifed and directed. |
| 10 | (a) 20 mm bore |
| 11 | (b) 50 mm bore |
| 12 | Material and labour for ductile iron pipes with socketed and spigot ends suitable for tyton joints centrifugally cast (spun) class 'K-9' in any length laid in trenches of 100 mm bore with cement mortar internal lining and external zinc coating with a bitumen finishing layer, including necassary joints/spares complete all as specified and as directed. |
| 13 | Material and labour for ductile iron pipes with socketed and spigot ends suitable for tyton joints centrifugally cast (spun) class 'K-9' in any length laid in trenches of 150 mm bore with cement mortar internal lining and external zinc coating with a bitumen finishing layer, including necassary joints/spares complete all as specified and as directed. |
| 14 | Dismantling and taking out the existing corroded / scaled GI pipe / PPR/CI/DI pipe with fittings connections from trenches, walls, ceiling or floor and removal from site or disposed off for the following sizes complete with all fittings including gate valves, all as specifed and directed. |
| 15 | (a) 20 mm bore |
| 16 | (d) 50 mm bore |
| 17 | Dismantling and taking out the existing corroded old CI/GI pipe of 80 mm with fittings connections from trenches, walls, ceiling or floor and removal from site or disposed off for the following sizes complete all as specifed and directed. Note: Excavation and earth work shall be measured and paid seperately under respective item of schedule \\"A\\". |
| 18 | Dismantling and taking out the existing corroded old CI/GI pipe of 100 mm with fittings connections from trenches, walls, ceiling or floor and removal from site or disposed off for the following sizes complete all as specifed and directed. Note: Excavation and earth work shall be measured and paid seperately under respective item of schedule \\"A\\". |
| 19 | Dismantling and taking out the existing corroded old CI/GI pipe of 150mm with fittings connections from trenches, walls, ceiling or floor and removal from site or disposed off for the following sizes complete all as specifed and directed. Note: Excavation and earth work shall be measured and paid seperately under respective item of schedule \\"A\\". |
| 20 | M & L for CI/DI fitting for spigot & socket end pipes such as Bends (any type, radius and angle), upto 150 mm bore including removing/ dismantling of old CI fittings complete all as specified and directed. |
| 21 | M&L for cutting of cast iron pipe or any other type of upto 200 mm bore for insertion of tees, collars, sluice valves, etc including dewatering work required for working water pipe lines complete all as specified and directed. |
| 22 | M&Lcutting existing steel tubing for alterations or additons (each cut measured) for the following sizes complete all as specified and directed. |
| 23 | (a) 20 mm |
| 24 | (b) 50 mm |
| 25 | Supply and fixing in replacement CI sluice valve non rising spindle both end flanged dully drilled for both ends with stainless steel spindle (Non rising spindle) as IS-14846/2000, PN1.6 with hand wheel, ISI marked of following sizes and taking dowen the old unserviceable |
| 26 | (a) 200 mm bore |
| 27 | (b) 150 mm bore |
| 28 | (c) 100 mm bore |
| 29 | (d) 80 mm bore |
| 30 | Supply and fixing in replacement CI Non return valve flanged ends ISI marked as per IS-5312 complete with Nuts/Bolts and washers and rubber packing etc for the following sizes:- |
| 31 | (a) 150 mm bore |
| 32 | ( b) 100 mm bore |
| 33 | Supply and fix cast iron air valve with two air outlets 80 mm bore and fixing up in 150 mm DI water supply mains through DI flanged Tee 150x100x80 mm complete all as specified and directed. Note : Flanged tee required size shall be paid under respective item of this schedule seperately. |
| 34 | Supply and fix cast iron air valve with two air outlets 50 mm bore and fixing up in 100 mm DI water supply mains including DI flanged Tee 100x150x50 mm complete all as specified and directed Note : Flanged tee required size shall be paid under respective item of this schedule seperately. |
| 35 | Supply and fix cast iron air valve with two air outlets 50 mm bore and fixing up in 80 mm DI water supply mains including DI flanged Tee 100x150x50 mm complete all as specified and directed Note : Flanged tee required size shall be paid under respective item of this schedule seperately. |
| 36 | Suplly and fix in replacement cast iron ''mechanical joint set complete of two flanged collar one no sleeve two nos rubber \\"O\\" ring and nut bolts washers of suitable size for 150 mm bore CI/DI pipe complete including necessary cuting, grinding work to fix in pipe as directed. |
| 37 | Suplly and fix in replacement cast iron ''mechanical joint set complete of two flanged collar one no sleeve two nos rubber \\"O\\" ring and nut bolts washers of suitable size for 100 mm bore CI/DI pipe complete including necessary cuting, grinding work to fix in pipe as directed. |
| 38 | Suplly and fix in replacement cast iron ''mechanical joint set complete of two flanged collar one no sleeve two nos rubber \\"O\\" ring and nut bolts washers of suitable size for 80 mm bore CI/DI pipe complete including necessary cuting, grinding work to fix in pipe as directed. |
| 39 | S&F cast iron 'D' joint set complete of two flanged collar one no sleeve two nos rubber 'O' ring and nut bolts washers of suitable size for 100 mm bore CI/DI /GI pipe complete including necessary cutting, grinding work to fix in pipe as directed. (Note:- Earth work required to clear the existing pipe line shall be measured and paid separately) |
| 40 | Material and labour for fixing of MS clamp of size 100 mm dia, 150 mm width, 4 mm thickness incl nuts, bolts washers complete all as specified and directed. |
| 41 | Material and labour for fixing of MS clamp of size 80 mm dia, 150 mm width, 4 mm thickness incl nuts, bolts washers complete all as specified and directed. |
| 42 | Cutting the existing hard standing/road of facilitate for laying of water pipe line of any type any size and making good the disturbed portion to bring it to original condition with plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) all as specified and as directed. |
| 43 | M&L for cement concrete 1:2:4 type B1 using (20 mm graded stone aggregate) as in mass concrete including necessary form work finished even and smooth complete all as specified and directed. |
| 44 | Supply & fixing of ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20 mm dia pipe |
| 45 | Supply & fixing of rotational moulded polyethylene water storage tank of capacity 500 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified Please Enable Macros to View BoQ information |
| 46 | Supply & fixing of rotational moulded polyethylene water storage tank of capacity 500 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender