Tender For Repair/ Replacement Of Pathway, Railing, Hardstanding, Plain Cement Concrete Drain And Other Misc Works At Jutogh Cantt, Kelvin Grove And Shimla Under Ge (I) Jutogh
Tender Value
40 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
12 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Pathway, Railing, Hardstanding, Plain Cement Concrete Drain And Other Misc Works At Jutogh Cantt, Kelvin Grove And Shimla Under Ge (I) Jutogh
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors or pavings n. exc. 15cm thickness below or above ground level, complete all as specified and directed. |
| 2 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 3 | M&L for 40mm thick Cement concrete 1:2:4, type B-1, using 40mm garded crushed stone aggregate as in flooring finished even and smooth surface, complete all as specified and directed. |
| 4 | M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed. |
| 5 | M&L for precast interlocking paver block glossy finish of any size and shape confirming to IS 15658-2006 of 80mm thick M-40 Grade with grey cement and pigment set, complete all as specified and directed. |
| 6 | M&L for precast interlocking paver block glossy finish of any size and shape confirming to IS 15658-2006 of 60mm thick M-35 Grade with grey cement and pigment set, complete all as specified and directed. |
| 7 | M&L for sand filling under floors, below paver blocks or in foundations including watering and consolidation, complete all as specified and directed. |
| 8 | M&L for coloured chequred cement concrete tiles 30x30x25mm thick (lacquer finish) in grey cement and with pigment in floors etc., set and jointed in neat cement slurry, over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 9 | S&F plain cement concrete paver blocks of cobble stone pattern, 80 mm thick, of approved colour (red, black, grey, yellow, Dhoulpur, coffee, green, cream, dark green, etc.), for use in roadside paths, parks, parking areas, and similar works. The exact sizes and combination of multiple sizes of paver blocks shall be finalized by the Engineer-in-Charge after approval of the sample, complete all as specified and directed. |
| 10 | M&L for lime or sand stone kerb of roughly squared stones of size 20x30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall n. exc. 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in CM 1:6 and struck flush, complete all as specified and directed. |
| 11 | S&F high intensity retro-reflective tape of approved make (3M or equivalent) on kerb stones including cleaning, surface prepartion and fixing, complete all as specified and directed. |
| 12 | M&L for 16-18mm thick granite (z black colour or any other colour as approved by Engr-in-charge) of any type of work (table rubbed and polished) in pillar/ vertical surface and like in 15 thick screed bed cement mortar 1:4 including edges of stones slabs one edges such as cooking steps or etc,moulding, pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 13 | Dismantling of floor hearth or wall tiling/stone slabe incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed. |
| 14 | M&L of wall cladding glazed ceramic tiles in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing in to layer coat in CM 1:4, complete all as specified and directed. |
| 15 | Removing demolished/ excavated material /soil exc. 250m but n. exc. 500m and depositing were directed out of MoD Land, complete all as specified and directed. |
| 16 | M&L for cement concrete 1:3:6, type B-1, using 20mm graded crushed stone aggregate as in surface channels and drains etc complete including necessary formwork and smooth fair finish, complete all as specified and directed. |
| 17 | Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed. |
| 18 | M&L for brick work with sub class 'B' bricks old size straight or curved on plan built in CM 1:4, complete all as specified and directed. |
| 19 | M&L for walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted built in CM 1:6, including raking or cutting out joints, complete all as specified and directed. |
| 20 | All as per Srl item No 19.00 above but \\"except stone\\" complete all as specified and directed. |
| 21 | M&L for precast PCC 1:3:6, type C-1, using 20mm graded stone aggregate as bonder stones set in CM 1:6, complete all as specified and directed. |
| 22 | M&L for hand packing broken stones or boulders (any thickness) at the back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and directed. |
| 23 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto coarse in CM (1:4) including raking out existing pointing etc., complete all as specified and directed. |
| 24 | S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors,complete all as specified and directed. |
| 25 | M&L for cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregates as in foundation filling and mass concrete, complete all as specified and directed. |
| 26 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc., complete all as specified and directed. |
| 27 | M&L for plastering work 15mm thick on fair surfaces of stone masonry, brick or concrete surfaces (1:4) to be finished even and fair (without using extra lime or cement), complete all as specified and directed. |
| 28 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces at any height of building / tower, complete all as specified and directed. |
| 29 | S&F 5mm thick, plain Polycarbonate translucent sheeting fixed with self tapping, screw & dismantling of old sheet, complete all as specified and directed. |
| 30 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 31 | Excavating in post holes hard / dense soil (or similar holes) each n. exc 0.50cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard/ dense soil, complete all as specified and directed. |
| 32 | S&F framed work as in steel gate in such as grills gratings etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe 290, Gde -E-165 including all fittings and fixtures etc., complete all as specified and directed. |
| 33 | S&F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W, (Gde-E- 250), quality-A etc., complete all as specified and directed. |
| 34 | S&F welded steel wire fabric weight (not less than 4kg per Sqm) complete to wood or steel members etc., complete all as specified and directed. |
| 35 | S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0, Gde E-165, complete all as specified and directed. |
| 36 | S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc., (each line wire to be measured), complete all as specified and directed. |
| 37 | Dismantling fencing wire mesh, any type, complete all as specified and directed. |
| 38 | M&L for punched tape concertina coil (PTTC) 610mm dia coil provided on any section any place and description including necessary biding/ welding, complete all as specified and directed. |
| 39 | Supply only chain link MS galavnised any size and type, complete all as specified and directed. |
| 40 | Fixing only chain link fencing incl line wires any mesh size & type to any type of standards rails straining bolts etc. incl provision of bindig wire, complete all as specified and directed. |
| 41 | S&F mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally for hooping, for columns,hooking end and binding with MS wire annealed not less than 0.9mm dia or secure with clips, complete all as specified and directed. |
| 42 | S&F screw bolts (machine made) with hexagonal or squre heads with dia of neck 5 to 10mm at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts not exc 5cm and dia of shank 10 mm, complete all as specified and directed. |
| 43 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in coping to retaining walls/ steps/ parapet/ kerbs/ base of railing post etc., including necessary formwork, complete all as specified and directed. |
| 44 | S&F 3 seater Cast iron FRP Strip (Wooden Texture) for outdoor garden bench of size 63x24x31(inches). It should be Non- Breakable and Easy to handle Lightweight and durable Long Life and Eco-Friendly, Resistant To Both Sun And Rain, minimum weight of bench 60Kg and it can take load upto 350 kg distributed across the length, ideal for patios, lawns, or park settings with armrest and backrest of intricate design, complete all as specified and directed. |
| 45 | M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25cm or less incl use of waste and side form for laying pavement concrete/ hard-standing in bays between joints, complete all as specified and directed. |
| 46 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing, complete all as specified and directed. |
| 47 | Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge and thickness incl nainital pattern roof covering, fixed with J/L hooks or coach screws, complete all as specified and directed. |
| 48 | S&F pre-painted galvalume aluminium zinc coating having minimum 150gsm GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws, complete all as specified and directed. |
| 49 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, eaves board fixed with self tapping screws, complete all as specified and directed. |
| 50 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 51 | M&L for preparation of old steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender