Tender For special Repairs To Bldg No 229/2, 229/3, 229/4, 10/3J And 10/F Mg Road In The Area Of Age B/R-1 Under Ge (West) Lucknow.
Tender Value
77.09 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
12 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Bldg No 229/2, 229/3, 229/4, 10/3J And 10/F Mg Road In The Area Of Age B/R-1 Under Ge (West) Lucknow.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified and directed |
| 2 | M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6.0 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 3 | M & L for brick work with fly ash bricks straight or curved on plan exc 06 M mean radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 4 | M & L for Repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of ruboish, all complete as per the direction of Engineer-in-Charge. |
| 5 | M & L for 5 mm thick rendering in CM (1:3) on celling finished even and smooth without using extra cement including taking down cement plaster complete all as specified and directed. |
| 6 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed. |
| 7 | M&L for non skid matt finished floor tile (coloured) 400x400x20 to 25mm thick (square) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4, complete all as specified and directed. |
| 8 | M&L for glazed ceramic tiles (coloured) 300 x 450 x 7 to 8mm/ 300 x 600 x 7 to 8mm/600 x 1200 x 7 to 8 mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete all as specified and directed. |
| 9 | M&L Virified Ceramic tiles Double Charge 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement & sand mortar 1:4, complete all as specified and directed. |
| 10 | All as per item No-9 above but as in vertical surfaces as in dado/skirting with and including 10 mm thick backing coat in CM 1:4, complete all as specified and direceted. |
| 11 | M&L Virified Ceramic tiles Double Charge10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 but not exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement & sand mortar 1:4, complete all as specified and directed. |
| 12 | All as per item No-11 above but as in vertical surfaces as in dado/skirting with and including 10mm thick backing coat in CM 1:4, complete all as specified and direceted. |
| 13 | M&L 18-20mm thick granite stone slab, machine cut and as in shelves and partition in cupboards, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing including making sandwitch moulding to edges complete all as specified and directed. |
| 14 | M & L for 20mm thick granite stone slab as in cooking platform, window cill over 15mm thick screed bed in CM 1:4 including cutting, polishing & rubbing and including rounding of exposed edges complete all as specified and direceted. |
| 15 | M & L for drilling through holes in granite stone for pipes etc. not exc. 25 mm dia complete all as specified and direceted. |
| 16 | Demolition of RCC as in lintel, shelves etc not exc 15 cm thickness (below or above ground level), complete all as specified and direceted. |
| 17 | M & L for RCC 1:2:4, type B1 using 20mm graded stone aggregate in RCC lintel, shelves, hold fast etc. with necessary form work complete all as specified and directed. |
| 18 | M & L for Mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required including hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia all as directed and specified. |
| 19 | Taking down steel tubing and connections and fittings 15mm bore including cleaning for refixing or removing from site complete all as specified and direceted. |
| 20 | Taking down steel tubing and connections and fittings 20mm bore including cleaning for refixing or removing from site complete all as specified and direceted. |
| 21 | M & L for Gl tubing 15mm dia, medium grade, galvanised with all fittings fixed to wall and floor, complete all as specified and direceted. |
| 22 | M & L for Gl tubing 20mm dia, medium grade, galvanised with all fittings fixed to wall and floor, complete all as specified and direceted. |
| 23 | M & L for cutting and chaseing in brick wall built in cement mortar for concealed Gl tubing and making good in CM, 1:3 not exc 10cm in girth, complete all as specified and direceted. |
| 24 | Taking down eaves Gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and direceted. |
| 25 | S & F PVC (SWR) Pipes 110mm dia single socketed in any length with rubber ring joints, fixed to walls complete all as specified and direceted. |
| 26 | S & F 75mm PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 27 | S & F PVC (SWR) bends any radius 110mm dia, complete all as specified and directed. |
| 28 | S & F PVC (SWR) single TEE equal 110mm dia, complete all as specified and directed. |
| 29 | S & F PVC (SWR) bends any radius 75mm dia, complete all as specified and directed. |
| 30 | S & F in repair 75mm dia PVC Floor trap including grating fixed in floor with cement, complete all as specified and directed. |
| 31 | Supply and fixed in repair vitreous china wash hand basin white flat back size 550x400mm including 02 Nos angle iron bracket 40x40x5mm, PTMT waste coupling and 32mm dia waste pipe of suitable lengh with socket, complete all as specified and directed. |
| 32 | S&F in repair Vitreous China, non porous matt finish Table Top Wash Basin for Bathroom Made of Ceramic Star White Rectangular Shape 400 x 490 x 150mm size, high temperature resistant, stain resistant, scratch resistant including ceramic waste coupling and 32 mm dia waste pipe of suitable length with socket complete all as specified and directed. |
| 33 | S & F in repair vitreous china wash down water closet (pedestal pattern) pan white with \\"P\\" or \\"S\\" trap including connection to drain or outgoing pipe and to syphonage pipe complete all as specified and directed. |
| 34 | S&F in repair High grade white glossy ceramic with anti germ glaze S trap / P trap, one piece toilet seat of size 370X666X750mm with and including water saving dual flush with integrated cistern fitting inci soft close slim seat cover and floor fixing accessories complete all as specified and directed. |
| 35 | S & F in repair central hole wash hand basin mixer, fancy type, brass chromium plated, with round spout with waste system, including plugging and fixed, suitable of 15 mm bore pipe all complete as per the direction of Engineer-in-Charge |
| 36 | S&F in repair Table top wash hand basin mixer without pop up waste system and with 450mm Long braided hoses including plugging and fixed suitable of 15mm bore pipe complete all as specified and directed. |
| 37 | S & F in repair wall mixer L-bend type with connecting legs and wall flanges, fancy type brass chromium plated, with closted swinging spout including plugging and securing to walls suitable for 15 mm bore pipe, all complete as per the direction of Engineer-in-Charge. |
| 38 | S & F in repair cast copper alloy bib taps chromium plated 15mm bore pipe with crutch or butterfly handle, complete all as specified and directed. |
| 39 | S & F in repair Adjustable Easy Install long body bib tap of brass 15mm bore pipe with wall mount wall flange, silver or black in colour, polished finish complete all as specified and directed. |
| 40 | S & F in repair Stop valve cast copper alloy with capstain head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed. |
| 41 | S & F in repair fancy type brass angle valve cock screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe, silver/black coloured complete all as specified and directed. |
| 42 | S & F in repair CP shower rose fancy type with or without swivel joints of size 125mm dia including fixing to steel pipe or union, complete all as specified and directed. |
| 43 | S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall, complete all as specified and directed. |
| 44 | S & F in repair PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed. |
| 45 | S & F in repair Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and wall hook including making connections & fixed in position complete as specified superior quality all complete as per the direction of Engineer-in-Charge. |
| 46 | S & F in repair CP Brass toilet paper holder with wall hook bracket etc, complete set of superior quality. |
| 47 | S & F in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer, complete all as specified and directed |
| 48 | S & F in repair CP Brass Tabular Towel Rail, 20mm dia D type 60cm long between flanges complete set of superior quality. |
| 49 | S & F in repair looking mirror of size 600 x 450mm of 6 to 8 mm thick fixed with stainless steel studs complete all as specified and directed. |
| 50 | S & F in repair PVC coloured bath cabinet overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and directed. |
| 51 | S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600 mm long. |
| 52 | S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all complete as per the direction of Engineer-in-Charge. |
| 53 | Supply and fixing in repairs stainless steel peg set (06 Nos hook) etc. complete all as specified and directed. |
| 54 | S & F in repair double bowl kitchen sink with drainage board made out of stainless steel 1mm thick with plug washer waste coupling waste pipe incl bedding in cement mortar, connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 55 | S & F stainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc. made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed. |
| 56 | S & F in repair rotantional moulded polythylene water storage tanks 500 Itr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed. |
| 57 | S & F in repair rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed. |
| 58 | S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified and directed. |
| 59 | S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 60 | S & F Gun-metal, globe or gate valves 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 61 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exc. 1.50 Sqm and removing from sites directed. |
| 62 | All as item No 61 above but exc 1.50 Sqm but not exc. 4 Sqm Each. |
| 63 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: (i)M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. (ii) WPC solid door/window frames, minus 5mm tolerance in dimension i.e, depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 64 | All as per item No-63 above but Frames/ Chowkhat of size 65 x 125 mm. |
| 65 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge). minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture roof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 66 | S & F 30mm thick factory made solid WPC (Wood Polymer Composite) moulded gauged door shutter with wire mesh in any no of division with brown wood grain texture including SS wiremesh (G-304) 0.36mm minimum dia of wire and average width of aperture 1.40mm shall be fixed with 15 X 15 square tube in side rails with screwing 8 X 28 heat metal zinc coated screws can be removed or fixed again after changing of wire mesh when needed. The density shall be as per manufacturer's instruction complete all as specified and directed. |
| 67 | S & F Mild steel framed work such as AC grills, grating, framed guard bars, ladders and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. Please Enable Macros to View BoQ information |
| 68 | S & F Mild steel framed work such as AC grills, grating, framed guard bars, ladders and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender