Tender For Demolition And Replacement Of Water Storage Tank With Syntex Tank In Building P-97 To P-109 At Kadamba Vanam Naval Base Karwar.
Tender Value
39.20 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
20 days left
EMD
78400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttara Kannada → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Demolition And Replacement Of Water Storage Tank With Syntex Tank In Building P-97 To P-109 At Kadamba Vanam Naval Base Karwar.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in ground floors and paving, not exceeding 15 cm thickness (below or above ground level), complete all as directed. |
| 2 | Dismantling of single layer Mangalore pattern or similar tiles in roofing, complete all as specified and directed. |
| 3 | M&L for roof tiles, Mangalore pattern Class 'AA', interlocking at side joints, laid dry, complete all as specified and directed. |
| 4 | M&L for roof tiles, Mangalore pattern Class 'AA', interlocking at side joints, laid dry, but except tiles complete all as specified and directed. |
| 5 | M&L for cement concretet 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof kerbs/paddings/mud-stops or bedding for water tanks/tiles etc., including chamfered edges, complete all as specified and directed. |
| 6 | S&F Rotational moulded PVC, triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, incl 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified. |
| 7 | S&F 25 mm bore brass float valve, high pressure, with polythene float and fly nut complete, screwed for GI pipe of following sizes, including necessary GI fittings, complete in repairs all as specified and directed. |
| 8 | S&F 15 mm dia gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed in repair, complete all as specified and as directed. |
| 9 | S&F 32 mm dia gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed in repair, complete all as specified and as directed. |
| 10 | Taking up or down GI tubing and connections 15 mm bore, including cleaning and stacking/removal to store, complete all as specified and directed. |
| 11 | Taking up or down GI tubing and connections 32 mm bore, including cleaning and removal to store, complete all as specified and directed. |
| 12 | S&F 15 mm dia uPVC pipes of pressure rating 10 kgf/cm², fixed to walls, ceiling or in floors etc., complete all as specified and directed. |
| 13 | S&F 32 mm dia uPVC pipes of pressure rating 10 kgf/cm², fixed to walls, ceiling or in floors etc., complete all as specified and directed. |
| 14 | M&L for providing precast cement concrete block masonry with solid blocks, exceeding 10 cm width, (1:3:6) type C-1 using 20mm graded stone aggregate and set in cement mortar 1:4, complete all as specified and directed. |
| 15 | Taking down cement plaster on brick or concrete surfaces of wall/ceiling and the like, including racking out joints, hacking for keys, scrubbing down with water etc., of any description, including removal of rubbish outside MoD land, complete all as specified and directed.Note: The rate quoted by the Contractor shall be deemed to include necessary scaffolding and formwork. |
| 16 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of concrete surfaces and finishing even and smooth without using extra cement, including necessary scaffolding and safety measures as required, complete all as specified and directed. |
| 17 | M&L for preparation of new plastered/decorated wall surfaces and applying two coats of acrylic emulsion exterior grade paint using mechanical sray (maximum working pressure of 3300 PSI) over a coat of primer, including necessary scaffolding and safety measures as required etc., complete all as specified and as directed. |
| 18 | M&L for providing 15 mm thick rendering over roof slab in cement mortar 1:3 mixed with waterproofing compound @ 2% by weight of cement or as per manufacturer’s instructions, finished even and smooth without using extra cement, complete all as specified and directed. |
| 19 | M&L for waterproofing treatment by applying oil bound bitumen primer having density 0.87–0.89 kg/litre @ 0.40 litre/sqm, providing and laying APP modified waterproofing membrane, 4mm thick, weighing not less than 4.0 kg/sqm of approved make, including minimum 10 cm side lap and 15 cm end lap, laid and pasted with blue flame torching application, and finally finishing with two coats of solar reflective bituminous aluminium paint @ 0.1 kg/sqm, complete all as specified and directed. |
| 20 | M&L for PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to wall, 110 mm bore etc., complete all as specified and directed. |
| 21 | S&F PVC (SWR) 100 mm branch piece, single (single Y), equal or unequal, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender