Tender For Repair And Maintenance Of Internal Wiring , Fittings/ Fixtures And Allied Works At Tech Area & Obd At Af Stn Halwara
Tender Value
25 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
1 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Internal Wiring , Fittings/ Fixtures And Allied Works At Tech Area & Obd At Af Stn Halwara
BOQ
| Sl. No. | Item Description |
| 1 | M&L for attending day to day complaints for inspecting / checking of 'No supply' complaints such as loose connection, burnt wire etc where no material is involved, complete all as specified and directed.Note :-(i) Minor materials such as insulation tape and minor wires etc shall deemed to be included under this item.(ii) Any item under which material that is to be replaced shall be measured and paid seperately under respective items. |
| 2 | Taking down aluminium / copper point wiring with surface/ concealed stove enamelled steel/ PVC conduit or wooden batten ( light, fan, socket, or power ) including sunk in cast iron / pressed steel terminal boxes such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 3 | M & L for concealed Point wiring for light/fan/exhaust points with PVC insulated unsheathed FRLS two run of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in PVC conduit not less than 19/20 mm dia with all fittings shunk in MS Pressed steel terminal boxessuitable depth and 1.6mm thick (duly painted with two coat of anticorrosive paint outsite and Aluminium paint inside) with top cover 2.8 mm thick Hylem sheet cover for mounting of switches/sockets and fan regulators etc, complete all as specified and directed. |
| 4 | All as per item No. 3 above but with socket outlet 5 Amps controlled by one switch on the same board. |
| 5 | All as per item No.3 above but with socket outlet 5 Amps controlled by one switch on independent board. |
| 6 | All as per item No. 3 above but with 2.5 sq mm for one 15 Amps socket outlet on independent board and 2.5 sqmm PVC insulated multisranded copper conductor cable as continuous earth wire complete. |
| 7 | Supply and fixing Switch piano type one way 5 amps 240 volts, complete all as specified and directed. |
| 8 | Supply and fixing Socket outlet 5 pin 5 Amps flush type, complete all as specified and directed. |
| 9 | Supply and fixing for Switch piano flush button single pole one way 15 amps 240 volts, complete all as specified and directed. |
| 10 | Supply and fixing for Socket out let 2 in 1, 6 pin, 5 and 15 amps multi purpose flush type, 230 volts, complete all as specified and directed. |
| 11 | Supply and fixing electronic fan regulator step, 250V flush type on the exiting phenolic laminated sheet etc, complete all as specified and directed. |
| 12 | Supply and fix Modular switch flush type, one way 5 Amp as per site requirment, complete all as specified and directed. |
| 13 | Supply and fix Modular socket outlet 2 in 1, 5 pin, 6 Amp as per site requirment, complete all as specified and directed. |
| 14 | Supply and fix Modular Switch 15 amp flush type as per site requirment, complete all as specified and directed. |
| 15 | Supply and fix Modular Socket outlet 2 in 1, 6 pin, 6 and 16 Amp as per site requirment, complete all as specified and directed. |
| 16 | Supply and fix Modular Electronic fan regulator 2 module, 240 Volt complete as per site requirment, complete all as specified and directed. |
| 17 | Supply and fixing ceiling rose surface bakelite 3 terminals, complete all as specified and directed. |
| 18 | Supply & fixing Lamp holder PVC/ Polycarbonate insulated body with back plate for angle/batten fittings complete, complete all as specified and directed. |
| 19 | Supply & fixing LED light fitting, 20 W, 4 ft long 230V, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre-wired, complete all as specified and directed. |
| 20 | Supply and fixing LED light fitting 2 Feet long 10 Watt LED Batten light for mirror and as wall light application, complete all as specified and directed. |
| 21 | Supply and fixing recess mounting LED slim ceiling light with extruded aluminium housing and milky diffuser with 36W, 2'X2' (600X600X11mm) LED slim panel, complete all as specified and directed. |
| 22 | Supply and fixing LED flat Bulkhead fitting 10 watt complete and fixing to wall / celing including fixing arrangement with clamps/ scrue/nuts/ bots /washers etc and connecting, complete all as specified and directed. |
| 23 | Supply and Fixing of building security light fitting 35 W LED New generation Energy Saving & Environment friendly long life versatile pressure die-cast aluminium IP-66 roadwayluminars with high power LEDs as light source and electronic drive including connecting, complete all as specified and directed. |
| 24 | Supply and fix in security light mounting bracket, GI pipe 40mm dia medium grade for mounting bracket bent to shape 0.6 meter length and fixing arrangement with two Nos of MS clamps set, nut, bolts, washers, and applying two coats of aluminium paints over one coat of Zinc oxide primer, complete all as specified and directed. |
| 25 | Supply and replacement of MS sheet 1.00 mm thick, louver shutter for exhaust fan suitable size for up to 350mm sweep with all accessories, fixing on wall, complete all as specified and directed. |
| 26 | Supply and replacement of MS sheet 1.00 mm thick, louver shutter for exhaust fan suitable size for 350mm to 450mm sweep with all accessories, fixing on wall, complete all as specified and directed. |
| 27 | Supply and fixing in repair flexible cord copper conductor of size 1.00 Sqmm, twin core, flat cable for connection to light fitting/fans from ceiling roses complete, complete all as specified and directed. |
| 28 | M&L for Sub main wiring with PVC insulated cable of size 2 X 4.0 Sqmm + 1 X 4.0 Sqmm earth wire multi stranded copper conductor drawing into and including heavy duty 25mm dia surface PVC conduit and continuous earth wire complete and making good to disturbed surfaces of wall/ floor etc, complete all as specified and directed. |
| 29 | All as per item No. 28 above but sub main wiring of size 2 X 6 Sqmm + 1 X 6.0 Sqmm as earth wire |
| 30 | S&F Sheet metal enclosures with socket plug top and MCB , Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete for AC, complete all as specified and directed. |
| 31 | S&F Vertical TPN load line DB double door 4 way with 160 Amp bus bar 415 Volt sheet metal enclouser including incomer MCCB 160 Amp 16 ka 4 Pole and 6 nos of MCB SP 16 Amp and 6 Nos MCB SP 20 Amp suitable dummy plate single pole, complete all as specified and directed. |
| 32 | S&F Sheet metal enclosure DB SPN, 8 way with 200 Amp rated bus bar, 240 V, double door . for fixing MCB’s, isolators etc., having IP-43 protection, flush mounting, complete all as specified and directed. |
| 33 | S&F Sheet metal enclosure DB SPN, 4 way with 200 Amp rated bus bar, 240 V, double door . for fixing MCB’s, isolators etc., having IP-43 protection, flush mounting, complete all as specified and directed. |
| 34 | S&F Sheet metal enclosure DB SPN, 2 way with 200 Amp rated bus bar, 240 V, single door . for fixing MCB’s, isolators etc., having IP-43 protection, flush mounting, complete all as specified and directed. |
| 35 | Supply and fix MCB TPN 'B' series, 415 volts, 50Hz, 63 Amps, suitable for high inrush current loads, complete all as specified and directed. |
| 36 | Supply and fix 'B' series MCB SPN 40/32 amps, 240 volts, 50Hz, complete all as specified and directed. |
| 37 | Supply and fix 'B' series MCB SP 6 to 32 amps, 240 volts, 50Hz, complete all as specified and directed. |
| 38 | Supply and fix 1100 Volts grade heavy duty service line cable PVC insulated stranded aluminium conductor, twin core cable, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat or cicrular of aluminium condoctors size 10 Sqmm stranded conductor, complete all as specified and directed. |
| 39 | All as per item No. 38 but stranded aluminium condoctors size 6 Sqmm. |
| 40 | Supply and fix of PVC flexible copper coductor cable of size 2.5 sqmm, 3 core as connections to MCB/socket to geysers, complete all as specified and directed. |
| 41 | Supply and fixing in repair LED Bollard light 13 watt, 900mm, 5700K, IP 54 made of gray color coated aluminum, complete all as specified and directed. Note:-The rate are deemed to be included for foundation in PCC (1:2:4) type B-1 using 20 mm graded stone aggregate including excavation, earth work etc required for prpper fixing of bollard Lights. |
| 42 | Supply and fixing in replacement recess mounting LED slim ceiling round light 15W, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender