Tender For Special Repairs Of Integrated Health Centre (Iha), 47 Inf Bde, Building No 126 Under Ge Golconda
Tender Value
69.42 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
24 days left
EMD
1.29 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs Of Integrated Health Centre (Iha), 47 Inf Bde, Building No 126 Under Ge Golconda
BOQ
| Sl. No. | Item Description |
| 1 | M&L excavating in hard and dense soils for post holes (or similar holes) each n. exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n. exc. 50 m and making good surface complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 3 | S&F rolled mild structural steel roof trusses (framed), trussed, purlins, posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) and including distance pieces, cleats etc, conforming to Fe 410-W (Gde-E) complete all as specified and directed. |
| 4 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410 -W (Gde E- 250) quality 'A' complete all as specified and directed. |
| 5 | S&F MS work as in post and struts and including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets, nuts & bolts etc, for securing wire mesh and including all necessary drilling, bolting or riviting etc, similar works conforming to Fe-410 or Fe-310 grade complete all as specified and directed. |
| 6 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe 410 -W (Gde E- 250) quality A complete all as specified and directed. |
| 7 | M&L preparation of new steel surfaces exc. 10 cm in width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 8 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 9 | S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 10 | S&F false ceiling with semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 50 to 0.75 as per IS 8225 1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000 mm. cross-T of size 15 x 32 mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i e 50mm long 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm Galvanised iron perimeter wall angle of size 24 x 24 x 0 40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and complete all as specified and directed. |
| 11 | S&F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors and including taking down of any size & cutting chases in brick wall, pinning in, making good to facings where required and pointing in CM 1:3 for concealed water tubing etc, and making good, cutting exc.10 cm but not exc. 20 cm girth complete all as specified and directed. |
| 12 | S&F 25 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls / ceiling or laying in floors and including taking down of any type of pipe complete all as specified and directed. |
| 13 | M&L RCC type B1, 1:2:4 (20 mm graded stone aggregate) as in slabs supported on walls, beams, landings, balconies, canopies, deck slabs and, shelves and similar works and including dismantling complete all as specified and directed. |
| 14 | M&L RCC type B1, 1:2:4 (20 mm graded stone aggregate) as in chajjas and including dismantling complete all as specified and directed. |
| 15 | M&L formwork to soffits of suspended slabs of thickness not exc. 200 mm such as roof slabs, floor slabs, landings and similar work as flat finishing to fair finished surface of concrete complete all as specified and directed. |
| 16 | M&L formwork to chajjas and the like finishing to fair finished surface of concrete complete all as specified and directed. |
| 17 | M&L TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, inlcuding cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 18 | Demolition of PCC in ground floor and paving not exc. 15 cm thickness (below or above ground floor) complete all as specified and directed. |
| 19 | M&L 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in plinth protection and including expansion or contractions joints at specified intervals, finished even and smooth w/o using extra cement complete all as specified and directed. |
| 20 | M&L Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard and dense soil complete all as specified and directed. |
| 21 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 22 | M&L 9 to 10 mm thick vitrified light shade ceramic tiles (square/ rectanglar ) polished, area of each tile not exceding 0.36 sqm, in floor / wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface, laid over and including 1 5mm thick screed bed or bedding in CM 1:3 and dismantling complete all as specified and directed. |
| 23 | S&F 7 to 8 mm thick non skid coloured ceramic tiles (square / rectangular) area of each tile exc. 0.06 Sqm but not exc.0.11 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or colored cement to match and including 15 mm thick screed bed in CM 1:6 and dismantling complete all as specified and directed. |
| 24 | S&F 7 to 8 mm thick non skid coloured ceramic floor tiles (square / rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or colored cement to match and including 15 mm thick screed bed in CM 1:6 and dismantling complete all as specified and directed. |
| 25 | S&F glazed ceramic tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on skirting / dado etc, set and jointed in neat cement slurry and pointed in white or colored cement to match and including 10 mm thick rendering in CM 1:4 and dismantling complete all as specified and directed |
| 26 | M&L 18/20 mm thick granite (jet Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and including 15 mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including moulding etc, complete all as specified and directed |
| 27 | M&L chequered cement concrete, coloured tiles, textured finished of size 250 x 250 x 22 mm / 300 x 300 x 22 mm thick set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 28 | M&L 18/20 mm thick, machine cut kota stone slab flooring laid over and including 20 mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing and dismantling complete all as specified and directed |
| 29 | M&L 18/20 mm thick machine cut kota stone laid over and including 15 mm thick rendering in CM 1:3 as in backing coat in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and directed. |
| 30 | M&L 100 thick PCC type D2, 1:4;8 (using 40 mm graded stone aggregate) in sub bases, floors and pavings etc, complete all as specified and directed. |
| 31 | Demolition of brick work or stone / boulder masonry, built in cement mortar complete all as specified and directed. |
| 32 | M&L brickwork with flyash bricks, old size straight or curved on plan exc. 6 m mean radius, built in CM 1: 6 complete all as specified and directed. |
| 33 | M&L half brick wall with old size fly ash bricks straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed. |
| 34 | M&L cleaning / removing all vegitation, bushes / small trees on vertical side of wall / chhaja / slab of building and including making good the surfaces with PCC 1:2:4 type B-0 (12.5 mm graded stone aggregate) or rendering in CM (1:3), removing debries to a distance not exc. 50 metre and depositing complete all as specified and directed. |
| 35 | Taking down cement or cement lime plaster on brick or stone walls / ceiling and including raking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. |
| 36 | M&L 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 37 | M&L 15 mm thick rendering in two coats of 5 mm thick in CM 1:4 mixed with integral water proofing compound as per manufacturers instruction, over 10 mm thick in CM 1:6 on fair faces of brick work or concrete surface on external wall, finished even and smooth without using extra cement complete all as specified and directed.Note: WPC will be measured and paid separately as supply only. |
| 38 | Supply only Integral liquid water proofing compound conforming to IS:2645-2003 complete all as specified and directed. |
| 39 | M&L for preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of alkali-resiatant primer and two coats of Birla wall care putty on plastered surrfaces complete all as specified and directed. |
| 40 | M&L preparation of newly plastered wall surfaces and including applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 41 | M&L complete removal of existing treatment on walls and including applying 2 coats of birla white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 42 | M&L complete removal of existing treatment (by high pressure water jet) on walls and including applying two coats of weather proof exterior grade paint over a coat of primer and 2 coats of birla wall care putty complete all as specified and directed. |
| 43 | Taking down chowkats or frames with shutters (without taking off shutter) not exc. 1.5 sqm each complete all as specified and directed. |
| 44 | Taking down chowkats or frames with shutters (without taking off shutter) from frame area exc. 1.5 but n.exc. 4 Sqm each complete all as specified and directed. |
| 45 | M&L PCC 1:2:4 type BI using 20 mm graded stone aggregate in bed block for hold fasts and coping including necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and directed. |
| 46 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium anodised door shutters, aluminium section weighing 0.55 kg/m and including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed. |
| 47 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators with one or more rebates and including joining cleat for fixing etc, complete all as specified and directed. |
| 48 | M&L powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc, aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass/ stainless steel screws complete all as specified and directed. |
| 49 | S&F factory made single extruded WPC (wood polymer composite) solid door / window / ceosetory windows & other frames / chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 50 | Note: 1. For WPC solid door / window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 2. M.S. hold fast / lugs or SS dash fasteners shall be measured and paid separately. |
| 51 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 52 | Note: stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 53 | S&F 4 mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed. |
| 54 | S&F 4 mm thick figured glass, pin head type and glazing exc. 0.50 Sqm in each pane fixed in aluminium door / window / ventilator with aluminium beading complete all as specified and directed. |
| 55 | S&F 5.5 mm thick glass fixed in aluminium door / window / ventilator with aluminium beading complete all as specified and directed. |
| 56 | S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and directed. |
| 57 | S&F 200 mm aluminium anodized tower bolts extruded section & fixed complete all as specified and directed. |
| 58 | S&F 150 mm extruded aluminium alloy handles fabricated type anodized complete all as specified and directed. |
| 59 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy etc, complete all as specified and directed. |
| 60 | S&F in repairs aluminium extruded section door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 61 | S&F 25 mm dia curtain rod (curtain rails) stainless steel and including decorative knobs, 2 Nos. for each curtain rod complete all as specified and directed. |
| 62 | S&F 300 mm mild steel ordinary rat tail rod pattern springs and including roller and roller plate (short type, fighter jet aeroplane shape type) complete all as specified and directed. |
| 63 | S&F 150 mm aluminium anodized barrel tower bolts extruded section complete all as specified and directed. |
| 64 | S&F stainless steel wire cloth 0.36 nominal dia of wire and avg width of aperturre 1.40 mm fixed with and including flat iron fillets 12 mm, 3 mm with nut, bolts complete all as specified and directed. |
| 65 | S&F in repair 18 mm thick veneered decorative plywood, grade-1 (with BWR resin) with decorative face veneers on both faces fixed with brass screws and cups complete all as specified and directed. |
| 66 | S&F 30 mm continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) complete all as specified and directed. |
| 67 | S&F extruded aluminium alloy handles 75 mm fabricated type anodized complete all as specified and directed. |
| 68 | M&L 2nd Class hard wood plain fillets, square or triangular in section, clean swan, secured with nails or brads, cross sectional area exc. 13 Sqcm but not exc. 25 Sqcm complete all as specified and directed. |
| 69 | M&L preparation of new wooden surfaces of description over 10 cm in width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 70 | S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in repairs complete all as specified and directed. |
| 71 | S&F 2000 ltrs capacity rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and including 20 mm bore ball valves ball brass valves, high pressure, with polythene float and flynut and dismantling of existing water tank of any size complete all as specified and directed. |
| 72 | S&F in repairs 500 ltrs capacity rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and including 20 mm bore ball valves ball brass valves, high pressure, with polythene float and flynut and dismantling of existing water tank of any size complete all as specified and directed. |
| 73 | S&F in repairs, vitreous china wash basin, white, flat back, size 630 x 450 mm and including CI brackets, 32 mm dia waste coupling, 32 mm waste fittings, 32 mm dia brass chromium plated bottle tap and PVC connection 600 mm long, 15 mm bore fancy type single lever CP brass Pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, swan pipe complete all as specified and directed. |
| 74 | S&F in repairs Vitreous table top wash basin, white, rectangular with curved corners of size 400 x 500 mm and including cutting and setting on granite, 40 mm dia waste coupling, 40 mm waste fittings, 40 mm dia brass chromium plated bottle tap, 15 mm bore fancy type single lever CP brass pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, swan pipe complete all as specified and directed. |
| 75 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) and including 'P' or 'S' trap with necessary fixing arrengement, plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device complete all as specified and directed. |
| 76 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook and including making connections and fixed in position complete all as specified and directed. |
| 77 | S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 78 | S&F in repair vitreous china soap dish approximate size 160 x 160 x 90 mm embedded in the wall complete all as specified and directed. |
| 79 | S&F in repairs 15 mm bore bib taps fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed. |
| 80 | S&F in repairs 15 mm bore stop valves, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union with long shank complete all as specified and directed. |
| 81 | S&F in repairs 15 mm bore stop valves, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 82 | S&F in repairs 20 mm CPVC pipes ball valves, with CPVC lever, screwed both ends complete all as specified and directed. |
| 83 | S&F in repairs 600 x 450 mm belvelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood with PVC / alluminium frame and fixed to wooden plugs with chromum plated brass screws, cup washers, complete all specified and directed. |
| 84 | S&F in repairs 450 x 350 mm PVC bath room cabinet with mirror complete all as specified and directed. |
| 85 | M&L stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, and including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 86 | S&F in repairs vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 87 | S&F PTMT towel rail 600 mm long fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190 gms) complete all as specified and directed. |
| 88 | S&F in repairs 125 mm size brass chromium plated shower rose with arm or without swivel joints and including fixing to steel pipe or union fixed complete all as specified and directed. |
| 89 | Demolition and breaking up drain pipes (SGSW / AC / PVC / RCC) set in CM, Internal dia of pipe upto 110 mm complete all as specifed and directed. |
| 90 | M&L earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exc.1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50 m complete all as specifed and directed. |
| 91 | S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to wall complete all as specified and directed. |
| 92 | M&L PCC 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 100 / 110 mm bore pipe complete all as specified and directed. |
| 93 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls (upto 4 floors) complete all as specifed and directed. |
| 94 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to wall complete all as specified and directed. |
| 95 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specifed and directed. |
| 96 | S&F in repairs 110 mm bore PVC (SWR) bend with oval access door complete all as specifed and directed. |
| 97 | S&F in repairs 75 mm bore PVC (SWR) bend with oval access doors complete all as specifed and directed. |
| 98 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 99 | S&F 110 mm bore PVC (SWR) bends any radious complete all as specified and directed. |
| 100 | S&F PVC (SWR) floor trap, plain with grating and including jointing with solvent cement, diameter of outlet in 75 mm, complete all as specifed and directed. |
| 101 | M&L point wiring for one light / fan point controlled by one switch complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceilling, continous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistanderd copper conductor connected to common earth and dolly, necessary modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting for modular switches / sockets / fan regulators etc, of suitable size modules and earth wire to be commectd to common earth dolly and including taking down existing for the following complete all as specified and directed :- Please Enable Macros to View BoQ information |
| 102 | M&L point wiring for one light / fan point controlled by one switch complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceilling, continous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistanderd copper conductor connected to common earth and dolly, necessary modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting for modular switches / sockets / fan regulators etc, of suitable size modules and earth wire to be commectd to common earth dolly and including taking down existing for the following complete all as specified and directed :- Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender