Tender For Block:- Installation Of Water Control Gate At Tengen Frisal Block: Frisal Panchayat/Location:- Brazloo
Tender Value
5.18 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
6 days left
EMD
15552
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Block:- Installation Of Water Control Gate At Tengen Frisal Block: Frisal Panchayat/Location:- Brazloo
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Providing /laying of stone soling handpacked in foundation trenches including dressing, watering, compacting and all carriage up to site of work complete job |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:: 1:4:8 (1 Cement : 4 coarse sand : 8 crushed graded stone aggregate 40 mm nominal size ) excld. carriage of all materials involved complete |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced Cement Concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 crushed graded stone aggregate and 20mm normsl size aggregate excld cost of carriage |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 Cement : 2 coarse sand : 4 crushed graded stone aggregate 20 mm nominal size ). excld. cost & carriage of all materials involved complete. |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand : 6 crushed graded stone aggregate 20 mm nominal size ) excld. carriage of all materials involved complete |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 9 | Centring and shuttering including strutting, propping etc and removal of formwork foundation, footings, bases of columns etc for mass concrete |
| 10 | Centring and shuttering including strutting, propping etc and removal of formwork Suspended-floors, roofs, landings, balconies and access platforms |
| 11 | Providing & fabricating of hydraullic gate including all carriages and head load with Winch machines including coupling and universal rods as per following specifications.Structure: The vertical and horizontal members shall be fabricated from 100x50mm (ISMC-100) channel section of required lengths to be properly welded. The rubber seal at the bottom and sides should be provided to check leakages. The whole structure shall be provided with a priming coat of approved brand and manufacture. The gate leaves shall be provided with 5mm thick MS sheet on either side. The gangway, stair and railing for gangway shall be provided with required section. Superstructure: Hoisting Maching- Providing and fixing of ISI marked heavy duty Winch machine of 2-3MT capacity (Worm Gear & Lock type) thrush bearing with double threaded Winch rod of 55mm dia with flanges having Winch gear 30mm dia, 65mm thick with Gure metal bush nut 150mm dia (outer) and 150mm rubber seal including all castings and accessories as per the directions of the site engineer. The gate shall rest on rolled channel section ISMC-150x65mm embedded in bed concrete with side grooves.Grooves: the grooves shall be 150x75mm fabricated out of MS Angles 75x5mm in the form of channel shape. |
| 12 | Carriage of material by Mechanical Transport Aggregates (Coarse and Fine) From nearst source to site of work avg.lead of 15 km |
| 13 | Providing and Fixing Community Information (Board as Main Office Board) made of 1.6mm MS sheets with ISA 40 as skeleton complete job, including Providing Geotagged Photographs of work before, during & after execution Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender