Tender For Upgradation Of Electric Network By Of Electrification Of Vaccant / Renovated Flats / Bunglows At Jawahar Nagar Srinagar.
Tender Value
11.57 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
16 days left
EMD
23140
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Electric Network By Of Electrification Of Vaccant / Renovated Flats / Bunglows At Jawahar Nagar Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for Light point/Exhaust fan/Bell point with (P+N+E) 3x1.5 sq.mm FRLS-H PVC insulated Multi strand Copper conductor single core cable, (Havells / Polycab / Anchor / Eq.Make) in surface/recessed Conduits laid in slabs (Including Cost of Conduit/Channel) with 01 No.of 6 Amp Modular Switch,Modular Plate,Cover in front & suitable GI box etc ISO/IEC Certified Schneider Livia /Havells/ Legrand Myris/Anchor roma plus/ABB & shall be approved before execution of work including 2.5 Sq.mm Circuit wire |
| 2 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required,ISO/IEC Certified of Havells/ Schneider Livia /Havells/ Legrand Myris/Anchor roma plus/ABB & shall be approved before execution of work. |
| 3 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/ Make) (Including Cost of Conduit/Channel) |
| 4 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified Schneider Livia /Havells/ Legrand Myris/Anchor roma plus/ABB & shall be approved before execution of work. |
| 5 | Wiring for 6Amp Plug(Computer Point) with (P+N+E) 3 x 2.5 sq.mm FRLS PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells / Polycab / Anchor Make) (Including Cost of Conduit/Channel) |
| 6 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including proving and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Schneider /Havells/ Legrand/Anchor roma plus/ABB & shall be approved before execution of work. |
| 7 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required of Schneider /Havells/ Legrand /Anchor roma plus/Eq.Make |
| 8 | Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/Recessed medium class PVC conduit (Havells/Polycab/ eqv Make) & shall be approved before execution of work (Including Cost of Conduit/Channel) |
| 9 | 2x10 sq.mm+ 1x16 sq.mm Earth for Power point/Machine Point Sub main in One run from Main Panel to Distribution Boards. |
| 10 | 2x6 sq.mm+ 1x6 sq.mm (P+N+E) for Lighting Sub main in One run from Main Panel to Distribution Boards. |
| 11 | 2x4 sq.mm+ 1x4 sq.mm (P+N+E) for Inverter/AC Sub main in One run from Main Panel to Distribution Boards. |
| 12 | 2 X 1.5 sq. mm |
| 13 | Supply/Fixing/Testing and Commissioning of 6Amp to 32 Amp Rating SP,240 volt C Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB . DB Complete with connections.(L&T / Siemens / Legrand / Schneider / Eton /eqv Make) |
| 14 | Supply/Fixing/Testing and Commissioning of following rating, Double pole, (P+N) 240 V, C* Curve 10K,Miniature Circuit Breaker (MCB) in the existing MCB DB complete with connections. (L&T/Siemens /Legrand/Schneider Make) |
| 15 | 32 Amp |
| 16 | 40Amp. |
| 17 | 63Amp. |
| 18 | Supplying and Fixing of MCB 8 (4+24) ways horizontal typed , sheet steel, Double Door Distribution Board, TPN 240V/415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (L&T / Siemens / Legrand / Schneider Make) |
| 19 | Supplying and Fixing of MCB 6 (4+18) ways horizontal typed , sheet steel, Double Door Distribution Board, TPN 240V/415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (L&T / Siemens / Legrand / Schneider Make) |
| 20 | Supply/Installation/Testing and Commissioning of 18W + LED Surface/recess depending on the type of ceiling Mounted (Commerical Type) light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacement of fixtures of Philips/Havell's/Wipro/Jaquar |
| 21 | Supply/Installation/Testing and Commissioning of 1200 mm sweep, ceiling fan with 03 No. blades, 30 cm long down rod, 02 No. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Havells Make.(3-Star) |
| 22 | Supply/Installation/Testing and Commissioning of 400 mm sweep, fan with 03 No. aerodynamically designed and balanced blades, adjustable upward and downward tilt,120 spokes guard , Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Havells Make.(3-Star) |
| 23 | Supply/Installation/Testing and Commissioning of 225-250mm Shutter Typed,320 Cu.m/Hr.AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37dB of Following Sizes including connection etc USHA/Havells/ Make.(3-Star) |
| 24 | Supply/Laying/Connecting and Commissioning of 70sq.mm 3.5-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/RR Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench |
| 25 | Maintenance Free copper rod earthing system with soil treatment to improve the Pit resistance Value.Supply,Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from earthing rod up to main Control panel through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job. |
| 26 | Supply/Laying of 25/32/38mm Dia and 2mm thick PVC Conduit/Lockable Channel of Anchor/Ravindra Blue/Finolex Make with other accessories like bends,etc complete to be laid in wall for downs and finishing the surface to its original shape by cement mortar plastering/Wall Putty/Paint etc. |
| 27 | Supply/Installation/Testing and Commissioning of 3-Phase, Four Pole 100 Amp,415V Ac,50Hz offload Manual Changeover Switch side handle in enclosure Havells/L &T/ABB Make including S/F/Crimping of Suitable Size of thimbles for connections as per site requirement |
| 28 | Supply and fixing of Hylum sheet (phenolic laminated sheet), 3 mm / 6 mm / 10 mm thick (as specified), duly cut to required size and shape, fixed with necessary nuts, bolts, screws, washers, spacers etc., including finishing and making good the surface, complete as required |
| 29 | Supply and fixing of 1' x 4 ' 36 w LED Surface light fixture (300 mm x 1200 mm) LED Surface Mounted Light Fixture – 36 Watt, Aluminium Body (Havells Make)Type: LED Surface Mounted Panel LightSize: 1 ft x 4 ft (300 mm x 1200 mm)Wattage: 36 WattsMounting: Surface Ceiling MountedHousing: Extruded Aluminium frame withpowder-coated finishDiffuser: Opal Polycarbonate/PMMA diffuser for uniform glare free illuminationInput Voltage: 220–240 V AC, 50 HzPower Factor: ≥ 0.90Driver: High-efficiency constant current electronic driverSystem Efficacy: Minimum 100 lm/WLuminous Flux: Minimum 3600 LumensColour Temperature: 3000K / 4000K / 6500K as specifiedCRI: ≥ 80Beam Angle: 120°THD: < 10%Surge Protection: Minimum 2.5 kVIP Rating: IP20Life Span: Minimum 50,000 HoursOperating Temperature: -10°C to +45°CFinish: White powder-coateds Havells /Phillips /eqv Make |
| 30 | Supply and fixing of angle batten holder SSK/Eqv make with 9-20 watt LED Lamp of Phillips /GM/Eqv make |
| 31 | Supply and fixing of Wall Mounted Heavy Duty Industrial Exhaust FanSweep Size: 450 mm (18\\") / 600 mm (24\\") as specifiedBody: Heavy-gauge die-cast aluminium or CRCA steel body with powder-coated finishFrame: Heavy-duty steel frame with corrosion-resistant coatingBlades: Aerodynamically designed cast aluminium blades, statically and dynamically balancedHeavy-duty continuous-duty induction motor with 100% copper winding Double ball bearing, maintenance-freeVoltage: 230 V AC, 50 Hz (Single Phase) / 415 V AC, 50 Hz (Three Phase)Protection Class: IP55Insulation Class: Class FSpeed: 900–1450 RPM |
| 32 | Supply and fixing of 2 feet LED tube fitting ntegrated LED Batten Light Fitting 2 Feet (600 mm)Wattage: 20 W ± 5% Extruded Aluminium body with powder-coated finish Opal Polycarbonate diffuser for uniform glare-free illumination Input Voltage: 100–300 V AC, 50 HzPower Factor: ≥ 0.90Luminous Efficacy: Minimum 100 lm/WLuminous Flux: Minimum 2000 LumensColour Temperature: 6500 K (Cool White) / 4000 K (Neutral White)Havells/Syska /eqv make |
| 33 | Supply and fixing of PVC Ceiling rose [2/3]ISI Marked suitable for connection of light /fan point comp with necessary connections etc Anchor/Havells/eqv make |
| 34 | Supply and fixing of LED Batten Light Fitting 4 Feet Extruded Aluminium body with powder-coated finish Opal Polycarbonate diffuser for uniform glare-free illumination Input Voltage: 100–300 V AC, 50 HzPower Factor: ≥ 0.90Luminous Efficacy: Minimum 100 lm/WLuminous Flux: Minimum 2000 LumensColour Temperature: 6500 K (Cool White) / 4000 K (Neutral White)Havells/Syska /eqv make |
| 35 | Providing & Fixing of IK08 IP-66 protected high power LED 50 Watt flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate |
| 36 | Supply/laying/Testing and Commissioning of 10mm sq single core FRLS PVC insulated duly Crimped by way of Suitable Size of thimbles for connections as per site requirement |
| 37 | Supply/laying/Testing and Commissioning of 16mm sq single core FRLS PVC insulated duly Crimped by way of Suitable Size of thimbles for connections as per site requirement |
| 38 | Supply/laying/Testing and Commissioning of I feet LED Bed light/mirror light of Havells /wipro/eqv make duly fitted16mm sq single core FRLS PVC insulated duly Crimped by way of Suitable Size of thimbles for connections as per site requirement Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender