Tender For Upgradation Of Electric Network By Way Of Sub Main / Mccb / Sub Boards Including All Allied Accessories At New Assembly Civil Secretariat Srinagar.
Tender Value
4.97 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
12 days left
EMD
9940
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Electric Network By Way Of Sub Main / Mccb / Sub Boards Including All Allied Accessories At New Assembly Civil Secretariat Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and Fixing of 8 (4+24) ways horizontal typed , sheet steel, Double Door Distribution Board, TPN 240V/415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (L&T/Siemens/Legrand/ Schneider Make) |
| 2 | Supplying and Fixing of 4 ways [4+4} vertical typed , sheet steel, Double Door Distribution Board, TPN 240V/415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (L&T/Siemens/Legrand/ Schneider Make) |
| 3 | Supply/ installation/testing and commissioning of CPRI Approved (IS/IEC:61439) panel Wall nounted compartmentalized , Mian Distribution panels ,fabricated out of sheet steel of 16 gauge dust protected, painted incl earth terminal with all necessary accessories as required for panel with internal wiring of panel .The Panel is to provided and fitted with following adjustable type controlling /Protection switch gear devices(1) Normal Incoming160 Amp TPN MCCB 35 kA with thermo magnetic adjustable based of Legrand/ Siemens/ ABB /Schinder /L&T/Havells make = 1 no 300 Amp TPN Bus bar Al Strips = 1 SetVolt meter =1 no, Ammeter = 1 no ,phase indicators =1set100 Amp 4 Pole change-over to switch from normal supply to DG supply Legrand/Havells/L&T/Schineider/ABB makeOutgoing:1) 40 Amp DP = 2 No. for Lighting Circuits2) 63 Amp DP = 2 No. for Heating Circuits3) 32 Amp DP = 3 No. for inverter and AC Points of Legrand/Havells/L&T/Schineider/ABB make |
| 4 | Supply/Fixing/Testing and Commissioning of 6Amp to 32 Amp Rating SP,240 volt C Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB . DB Complete with connections.(L&T/Siemens/Legrand/Schneider/Eton/eqv Make) |
| 5 | Supply/Fixing/Testing and Commissioning of following rating, Double pole, (P+N) 240 V, C* Curve 10K,Miniature Circuit Breaker (MCB) in the existing MCB DB complete with connections. (L&T/Siemens /Legrand/Schneider Make) |
| 6 | 32 Amp |
| 7 | 40Amp. |
| 8 | 63Amp. |
| 9 | Supply/Laying/Connecting and Commissioning of 120 sq.mm 3.5-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/Polycab/Eq. Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench .(Material to be approved before execution) |
| 10 | Maintenance Free copper rod earthing system with soil treatment to improve the Pit resistance Value.Supply,Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from earthing rod up to main Control panel through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job. |
| 11 | Supply/Laying of 25/32/38mm Dia and 2mm thick PVC Conduit/Lockable Channel of Anchor/Ravindra Blue/Finolex Make with other accessories like bends,etc complete to be laid in wall for downs and finishing the surface to its original shape by cement mortar plastering/Wall Putty/Paint etc. |
| 12 | Supply/Installation/Testing and Commissioning of 3-Phase, Four Pole 100 Amp,415V Ac,50Hz offload Manual Changeover Switch side handle in enclosure Havells/L &T/ABB Make including S/F/Crimping of Suitable Size of thimbles for connections as per site requirement |
| 13 | Supply and fixing of Hylum sheet (phenolic laminated sheet), 3 mm / 6 mm / 10 mm thick (as specified), duly cut to required size and shape, fixed with necessary nuts, bolts, screws, washers, spacers etc., including finishing and making good the surface, complete as required |
| 14 | Supply/Installation/Testing and Commissioning of 3-Phase, Four Pole 200 Amp,415V Ac,50Hz 36KA S/F/Crimping of Suitable Size of thimbles for connections as per site requirement |
| 15 | Supply/laying/Testing and Commissioning of 10mm sq single core FRLS PVC insulated duly Crimped by way of Suitable Size of thimbles for connections as per site requirement |
| 16 | Supply/laying/Testing and Commissioning of 16mm sq single core FRLS PVC insulated duly Crimped by way of Suitable Size of thimbles for connections as per site requirement |
| 17 | Supply/laying/Testing and Commissioning of 4 mm sq single core FRLS PVC insulated duly Crimped by way of Suitable Size of thimbles for connections as per site requirement |
| 18 | Supply/laying/Testing and Commissioning of 2.5mm sq single core FRLS PVC insulated duly Crimped by way of Suitable Size of thimbles for connections as per site requirement |
| 19 | Supplying and Fixing of 2+8way SPN MCB DB ways horizontal typed , sheet steel, Single Door Distribution Board as required. (L&T/Siemens/Legrand/ Schneider Make) |
| 20 | Supply/Installation/Testing and Commissioning of CPRI Approved (IS/IEC:61439) Main Controlling Panel,fabricated out of heavy gauge sheet steel ,dully Painted with powder coated paint ,dust protected ,earth terminal fitted on epoxy cleats, volt meter & Ammeters with selector switch & CT Coil of required ratio with all necessary connections & inner wiring of panel on both heating and lighting circuits. The switches are connected with bus bars inside panel & manufacturer CPRI Certified.The switch are adjustable type made of Havells/ L&T/ABB/Legrand/Siemens Make and change over switch should be of Havells/ L&T/Legrand/ Schneider Make.(1) Normal Incomer:a) 125 Amp-2-Pole ,16kA C-CURVE MCCB with extended terminals Havells/L&T/Legrand/Schneider Make as approved=01 No. b) 250 Amps P&N Al. Bus Bar Set = 01 Set,Digital Voltmeter ,Ammeter ,C.T Coils with Selector Switch & Phase indicator Set.Outgoing:(1) Normal outgoing forHeating/AC/Lighting/Inverter etc load(a) 63-Amp DP MCB = 02 No. for Heating Sub-main.(b) 40-Amp DP MCB= 02 No. |
| 21 | Supply/Laying/Connecting and Commissioning of 50 sq.mm 2-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/RR Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench |
| 22 | Providing and installation of single phase preventer as per IS12360 |
| 23 | Supply/Installation/Testing and Commissioning of 3-Phase, three Pole 150 Amp,415V Ac,50Hz 36KA S/F/Crimping of Suitable Size of thimbles for connections as per site requirement |
| 24 | Supply/Installation/Testing and Commissioning of 3-Phase,four Pole 150 Amp,415V Ac,50Hz 50 KA S/F/Crimping of Suitable Size of thimbles for connections as per site requirement |
| 25 | Providing and fixing 150 mm × 150 mm heavy-duty square GI chequered duct inspection cover with frame, fabricated from 6 mm thick galvanized steel plate, complete anti-skid surface, locking arrangement, nuts, bolts and all accessories.\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender