Tender For B.O.Q For Conversion Of Existing Hall At 2Nd Floor To Meeting Cum Training Hall At Sadder Treasury Srinagar
Tender Value
74.24 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
0 days left
EMD
1.48 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for B.O.Q For Conversion Of Existing Hall At 2Nd Floor To Meeting Cum Training Hall At Sadder Treasury Srinagar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Oct-2026 | Corrigendum | Other | 02-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Part-A Civil Work |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/cequivalent design mix) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead :Thickness above 25 mm upto 40 mm. |
| 5 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed fromM.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part-I : 2011 (Board with BIS certification marks) |
| 6 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm |
| 7 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate incl. cost and carriage of materials involved complete. |
| 8 | Providing and fixing of PVC wall panelling of superior quality of make like wall face or equivalent (0'10\\" x 10'0\\") including all necessary fittings and accessories etccomplete as per directions of Engineer-in- charge. |
| 9 | Providing and fixing of oval shaped table with 30 seater minimum capacity of size (17 feet in length, 30 inch in height, 24 inch in top width) with 19mm ply board (ply to ply) including cost of sunmica (8mm thick) of commercial quality, hardware, adhesives with budloo frame of 2\\"x2\\" including cost of beading, carriage and placing at site of superior quality as per the directions of Engineer-in-charge at site complete. |
| 10 | Providing and fixing of 0.8 mm thick textured dulmica/ sunmica of superior quality and approved brand manufacture incl. carriage, adhesives, complete job to be fixed on table as per the directions of Engineer-in-charge at site complete. |
| 11 | Providing and fixing of plastic 60mm dia PC Desk Grommet Cable Tidy Wire Hole Cover of superior quality as per the directions of Engineer-in-charge at site complete. |
| 12 | Providing and fixing of Ornamental beading ofrequired shape and size of standard quality incl. carriages, adhesive etc. as per the directions of Engineer-in-charge at site complete.(wooden) |
| 13 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class Kail wood 35mm |
| 14 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 15 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes ofthickness 4.0 mm (weight not less than 10kg/sqm) |
| 16 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth includingnecessary repairs to scratches etc. complete. |
| 17 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 18 | Providing and Fixing of various hardware fittings of standard quality. |
| 19 | Tower Bolts 100 mm |
| 20 | Handles 125 mm |
| 21 | Hinges 75 mm |
| 22 | Eye Hook |
| 23 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 24 | Carriage of material by mechanical Transport including loading, unloading etc. complete. |
| 25 | Sand for an average lead of 15 Kms from approved source. |
| 26 | Stone aggregate for an average lead of 15 Kms from approved source. |
| 27 | Part-B Electrification |
| 28 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor (Havells/P olycab/ Fenolex/ equivalent as directed by engineer incharge.) single core cable in surface / recessed medium class PVC conduit/ Channel (Anchor/ Polycab /Ravindra/ equivalent make as directed by engineer incharge.), with modular switch (|Anchor roma urban/Legrand /SSK NV/equivalent make as directed by engineer incharge.), modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 29 | Wiring for light/ power plug with 2X4 sq. mm + 1 x 4 sq.mm earth wire, FRLS PVC insulated copper conductor (Havell/ Polycab/ Fenolex/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit. |
| 30 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, cmodular plate, suitable GI/ PVC box, connections etc. as required. Modular switch and socket:- (Anchor roma plus/ Legrand Mylinc/ Seimens/ / schneider Live/ Crabtree athena / Abb make). |
| 31 | Wiring for lighting circuits/ inverter circuits/ 6- 10 amp power plugwith 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessedalongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 32 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/10 A modular socket outlet and 2 nos. 5/10 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- (Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia / crabtree athena make.) |
| 33 | Supplying and fixing suitable size Gi box/ PVC Box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Legrand Mylinc / Seimens/ schneiderLeiva / Crabtree athena/ Abb make.) |
| 34 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP M.C.B, \\"C\\" curve including connections painting etc as required. For Ac's |
| 35 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/ Anchor/ equivalent as directed by engineer incharge.), single core cable in surface/ recessed medium class PVC conduit as required. |
| 36 | 2 X 1.5 sq. mm+1 X 1.5 sq. mm earth wire |
| 37 | 2 X 6 sq. mm+1 X 6 sq. mm earth wire |
| 38 | 2 X 10 sq. mm+1 X 6 sq. mm earth wire |
| 39 | 2 X 16sq. mm+1 X 6 sq. mm earth wire |
| 40 | Supplying and fixing of following sizes of medium class PVC condut/ Channel/ duct! Anchor/Ravindra/ Eq. makejalong with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, complete |
| 41 | 25 mm |
| 42 | 32 mm |
| 43 | Supply and fixing of wooden channel/ casing made from Kashmiri Budloo wood having 2.6\\" 3\\" width suitable for carrying out wiring for different circuits |
| 44 | Supply installation testing and commissloning of 18W + LED Surface/recess, Mounted light luminary fitting,square or round shape with minimum system lumen efficacy ≥ 120 Im/Wattwith Pressure Die cast Aluminiura Housing and Heat Sink and P.F.>0.95, THD×10%, CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM8D test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting flxtures for a period of Two years ,which includes replacement of fixtures of Philips/ Helonix/Wipro / Regent make / sample to be approved before installation. |
| 45 | Supply installation testing and commissioning of 36 W + (2x2) LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with CRCA/ Al. Diacast Housing and P.F.>0.95,THD<10%,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V.The Fixture should have In built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacement of fixtures of Philips/crompton/Wipro make /Helonix sample to be approved before installation. |
| 46 | S/F testing and comm. Of MCB's of the below mentioned capacities in sub main controls, 10Klegrand C curve/ Schinider/ L&T./ABB make. |
| 47 | 6-32 Amp SP MCB |
| 48 | 40-63amp DP MCB |
| 49 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, celling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete. USHA Striker/Havells Oyster matalic/Crompton flavia/Sample to be approved before installation |
| 50 | Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor Roma urban/SSK NV/ equivalent make as directed by engineer incharge. |
| 51 | Supply and fixing modular blanking plates on existing modular switch plates, excluding cost of plates. |
| 52 | Supply installation testing and comm. Of 250mm sweep exhaust fan shutter type of havell /Bajaj/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/ window as per siterequirement and necessary connections. |
| 53 | Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode, 80mm dia connecting the plate with main control board by 10 SWG copper wire with 1/2\\" dia. Fuil thread brass nut and boit and washers. Refilling of pit with chemical. compound |
| 54 | Providing and fixing of Al.thimble 10-35mm sq. |
| 55 | Supply, Installation, Testing & Commissioning of 15 KVA 3-Phase IN singl Phase out ON Line UPS System with provision for connecting in 3 phas input and 3 phase output configuration, unity pf, LCD display with gravit sensor, built in OVCD, to provide backup time of 60 minutes at full loa (minimum VAH 24000), With In-Built Isolation Transformer of repute make dully ISI Marked (APC Schineider/ETON/VERTIV/ equivaler standard make) (Compitable to Genrator Supply having varing frequency With on line double conversion topology, high frequency techonology with front LCD,automatic bypass for fault tolerance & complete wit required Number, 12 Volts 65 AH SMF VRLA Batteries (Exide Amaron/Quanta make) with connecting links with angle iron batter stand complete job, complete with battery rack with two year warrant against any manufacturing defect. The job further includes AMC for UP and batteries for a period of three years with replacement warren reckoned from date of sucessfull commissioning. |
| 56 | Engaging of highly skilled labour / Electrician/ IT Related personal for carrying out I.T repairs at site, Dismentling of old damaged materials like wires in scraps, fixtures switches-sockets, servicing of panels and allied works, complete as directed by the engineer at site and stacking and handing over to concerned department including carrying out repairing works etc. |
| 57 | Supplying and fixing following way, Triple pole and neutral, sheet steel, MCB distribution board, (legrand/ Shinider/ABB make) 240 V, on surface recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted includingearthing etc as required. (But without MCB/RCCB/Isolator) |
| 58 | 6 way, Double door (18+4) |
| 59 | Supply fixing testing and comm. Of backlite holder/batten holder/ar holder/ ceiling roseSSK/Anchor make incl. PVC Block. |
| 60 | S/L, testing and commissioning of PVC Copper cable 650 V/1100 V Gr as per IS 7098 (Part 1) 1988 with upto Date Amendments. Havell standard make as directed by engineer incharge and making termination with brass compression gland and Copper lugs of requiredsize. |
| 61 | 35 sq.mm 3.5 core (un-armoured) |
| 62 | (UPS Panel) Design, Fabrication, Supplying, Installation, Testing and commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type CFT hinged doors, duly painted with provision for fixing of following switch gears,, Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc.as required.( As per approved design,size may vary as per site requirement) |
| 63 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductorcable including earthing etc. as required. |
| 64 | Normal INCOMING from UPS-1: |
| 65 | a)100A DP MCCB 16 KA including spreader links including spreader links, icu-ics-100% (Adjustable thermal and Adjustable magnetic release) Legrand/ Shinider/Semiens/ABB make. |
| 66 | b) 2 No. of Aluminium Bus Bar of 200 Amp. |
| 67 | c) Digital meters and phase indicators -1 set. |
| 68 | Normal INCOMING from UPS-2: |
| 69 | a)100A DP MCCB 16 KA including spreader links including spreader links, icu-ics-100% (Adjustable thermal and Adjustable magnetic release) Legrand/ Shinider/ Semiens/ABB make. |
| 70 | b) 2 No. of Aluminium Bus Bar of 200 Amp. |
| 71 | c) Digital meters and phase indicators -1 set. |
| 72 | OUTGOING: |
| 73 | a) 63amp DP MCB 10 KA Legrand/ Shinider/ABB/L&T sample to be approvedbefore installation.. |
| 74 | b) space for 12 way MCB's |
| 75 | (Main Panel) Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet, floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, Aluminium Bus Bar of various ratings after taking Derating factor into account, andother allied accessories etc. as required.(As per approved design,size may vary as per site requirement) |
| 76 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copperconductor cable including earthing etc. as required. |
| 77 | Normal INCOMING: |
| 78 | a) 160A 4P MCCB 50 KA including spreader links including spreader links, icu=ics=100% (Adjustable thermal and Adjustable magnetic release)Legrand/Shinider/Semiens/ABB make. |
| 79 | b) 4 No. of Aluminium Bus Bar of 400 Amp. |
| 80 | c) Digital meters and phase indicators -1 set. |
| 81 | d) onload Change over switch 100 Amp for generator.Front operated. |
| 82 | e) 4 No. of Aluminium Bus Bar of 200 Amp. |
| 83 | f) Digital meters and phase indicators -1 set. |
| 84 | OUTGOING: |
| 85 | a) 63amp TPN MCB 10 KA Legrand/ Shinider/ABB/L&T sample to be approved before installation.. |
| 86 | b) 40-63amp DP MCB 10 KA C - curve Legrand/ Shinider/ABB/L&T sample to be approved before installation.. |
| 87 | c) 100 amp DP MCB 10 KA C-curve Legrand/ Shinider/ABB/L&T sample to be approved before installation. |
| 88 | d) space for 20 way MCB's |
| 89 | S/L , testing and commissioning of PVC XLPE insulated alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 90 | 70 sq.mm 3.5 core |
| 91 | Supply, Installation, Testing and Commissioning of 27U networking rack, fully loaded, floor mounted with cable manager, cooling fans, equipment tray, PDU (5/16A-2 nos.) front open glass door, castor wheels. |
| 92 | Supply and laying of CAT 6 UTP cable in 1\\" PVC channel/pipe as required complete with all accessories to be laid along walls/surface, over ceiling, corridors and open spaces including drilling of holes/making good the damaged surfaces occurred during wiring work. |
| 93 | Supply, Installation, Testing and Commissioning of CISCO make Switchmodel CBS350-24P-4G including configuration with present network. |
| 94 | Supply and Fixing of PVC back box complete with single face plate andinformation outlet. |
| 95 | Supply, Installation,Testing and Commissioning of CAT 6 patch cords 2 m |
| 96 | Shifting of networking items, Switches, routers, rack to new server room location including identifications of LAN cables, proper tagging, providing and crimping of new RJ 45 connectors, dressing and providing of cables managers as required work complete as per direction of site engineer. the job also includes Dismantling & shifting to stores existing defunct/ damaged UPS systems, inverters and batteries including MS battery rack, servo stablizers, loose material and damaged wires/cables work complete as per direction of engineerin charge. |
| 97 | Part-C Digital Audio and Video Conferencing system |
| 98 | Supply, installation, testing and commissioning of Video Conferencing. sytem having specification. Video Standards and Protocols H-264 AVC, H-264 High profile H.256 Video Input 1 x HDCL 1 xHDMI 3 x USB Video Output -2x HOMI people video resolution, 4K, 30b fps (TX and RX) content sharing poly content APP support/Apple Air Play/IMiracast/ 1x HDMI input Audio poly Noise Block Al Technology Audio input- UP to three 1 x IP microphone arrays (20 ft pickup range each)- 1 xHDMI 1 x 3.5 mm stero linein Microphones Upto three iP microphone arrays (20 ft pick up range Jeach) Audio Output 1x HDMI ix3.5 mm stereo line-out other interfaces 3 k USB 3.0 1x US8-C 1x RS-232. 8 pin mini DIN Bluetooth 5.02 wifi 802, 11 a/b/g/n/ac (MIMO) Multichannel Concurrency inter operability Zoom Certified Microsoft teams certified, All Cloud services providers through- polyvideo App model. USB Devices Mode. Support for native 3rd party application includes Zoom Rooms, Microsoft Team, Ring Central Go to Room Dialpad Package includes G7500 codee cable Bundle Bundles available with E-60 camera, touchcontroller, Bluetooth remote control, and IP table microphone complete with decorative glass stand with S.S clamps etc as required. Warranty :- One year of make Polycom Group 7500/Cisco make. |
| 99 | Supply installation testing and commissioning of HDMI Splitter 1* 4 asper the attached specifications. Make: Cypress/ Kramer/ Christie |
| 100 | Supply installation testing and commissioning of Digital Signal Processor Make: Cypress/ BXB/ Aton |
| 101 | Supply installation testing and commissioning of Rx Tx as per the attached specifications, Make: Cypress/Kramer/Christie |
| 102 | Supply installation testing and commissioning of 65 inches LED TV as per theattached specifications. Make: SAMSUNG/SONY/LG |
| 103 | Supply installation testing and commissioning of 98 inches LED TV as per the attached specifications. Make: SAMSUNG/SONY/LG |
| 104 | Supply Installation Testing and Commissioning of Digital Chairman Unit Make: BOSCH/ Equivalent standard make as desired by engineer incharge. |
| 105 | Supply installation Testing and Commissioning of Digital Delegate Unit.Make: BOSCH/ Equivalent standard make as desired by engineer incharge. |
| 106 | Supply installation Testing and Commissioning of Digital conference system controller .Make: BOSCH/ Equivalent standard make as desired by engineerincharge. |
| 107 | Supply, installation, testing & commissioning of Wall Mount Loudspeaker Make: BOSCH/ Equivalent standard make as desired by Jengineer incharge. |
| 108 | Supply Installation Testing and Commissioning of 240 W Mixer Amplifier Make: BoSCH/ Equivalent standard make as desired by engineer incharge. |
| 109 | Supply, installation, testing & commissioning of Handheld Wireless Mic system Make: BoSCH/ Equivalent standard make as desired by engineer incharge. |
| 110 | Supply, Installation, Testing and Commissiong of 4*4 Matrix Switcher Make: Cypress |
| 111 | Supply, Installation, Testing and Commissiong of 4 X 4 Digital Audio Signal Processor with specifications as per Annexure Make: BXB/ Xilica/ QSC |
| 112 | Supply, Installation, Testing and Commissiong of HDMI Tx/Rx pairs with specifications as per Annexure Make: Cypress/Kramer/Creston |
| 113 | SITC of cable cubby |
| 114 | SITC of HDMI Cable 20 meter long |
| 115 | SITC of 1.5 meter HDMI cable |
| 116 | SITC of 2 Core speaker wire (pvc sheathed 40 / 76) |
| 117 | SITC of 1.5 Sq.mm, 2 core power wire insulated in PVC conduit pipes |
| 118 | SITC of 24U Rack Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender