Tender For Annual Repair And Maintenance Of Residential Building At Jail Road Mandi Under Mandi Division No.Ii Hppwd Mandi, Distt. Mandi (H.P.). (Sub Head:- Providing And Fixing Prepainted Steel Sheet For Ceiling, Steel Work, Cupboard Shutter And Oth
Tender Value
3.57 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
7 days left
EMD
7200
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Repair And Maintenance Of Residential Building At Jail Road Mandi Under Mandi Division No.Ii Hppwd Mandi, Distt. Mandi (H.P.). (Sub Head:- Providing And Fixing Prepainted Steel Sheet For Ceiling, Steel Work, Cupboard Shutter And Other Minor Works Etcetera In Type-Iii Qtr. No.I & Qtr. No.35) .
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials upto any lead complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 2 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 3 | Providing and fixing 0.37mm (zero point thirty seven millimetre) thick prepainted linning steel sheet in ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (Base members of steel work shall be measured & paid seprately) complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 4 | Providing and fixing 18 mm (eighteen millimetre) thick Raj Nagar plain white/ Udaipur green/ Zebra black marble gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment,epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera area of slab over 0.50 sqm (zero point five zero squaremetre) at all floor levels complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge |
| 5 | Repairs to plaster of thickness 12 mm (twelve millimetre) to 20 mm (twenty millimetre) in patches of area 2.5 (two point five) squaremeters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, with cement mortar 1:4 (one cement : four fine sand) including carriage of material within all leads and lifts and other incidentals complete in all respect and as per the entire direction and satisfaction of Engineer-in-Charge. |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in cement mortar 1:3 ( one cement : three sand) complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 7 | Distempering one or more coats on old work with oil bound washable distemper of approved brand and manufacture to give an even shade complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 8 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etcetera complete including carriage of material within all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge. |
| 9 | Providing and applying white cement based putty of average thickness 1 mm (one millimetre) , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material within all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge. |
| 10 | Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/10 sqm (at the rate of zero point seven five litre per ten square metre) of approved brand and manufacture complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 11 | Finishing walls with textured exterior paint of required shade with one or more coats on old work applied @ 1.82ltr/10sqm (at the rate of one point eighty two litre per ten squaremetre) complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 12 | Providing and laying in position cement concrete 1:2:4 (one cement: two coarse sand :four graded, crushed stone aggregate 20mm (twenty millimetre) nominal size ) excluding the cost of centering, shuttering, in all works up to all floor level including curing complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 13 | Providing and fixing 18mm (eighteen millimetre) thick HDHMR both side prelaminated board in Shutter/shelves/cup board with butt joints and fixing with nails and screws etecetera complete with all accessories including carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 14 | Providing M.S. Piano hinges having overall width 35mm (thirty five millimetre) ISI marked IS :3818 finished with nickel plating and fixing with necessary screws etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 15 | Providing and fixing 125mm (one hundred twenty five millimetre) bright/matt finished stainless steel handles of approved quality and make with necessary screws etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 16 | Providing and fixing double strip (horizontal type) magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 17 | Providing and fixing 40mm (forty millimetre) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etcetera complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 18 | Providing and fixing PVC edge Tape of superior quality in cupboard, ward robe shutters, including fixing with necessary adhesive/screws etcetera complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 19 | Providing and fixing fly proof stainless steel grade 304 wire gauge with 2nd (second) class teak wood beading 62X19 mm (sixty two into nineteen millimetre), to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm (one point four millimetre) in both directions with wire of dia. 0.50 mm (zero point five zero millimetre) complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender