Tender For Annual Repair And Maintenance Of Residential Building At Jail Road Mandi Under Mandi Division No.Ii Hppwd Mandi, Distt. Mandi (H.P.). (Sub Head:- Providing And Laying Distempering, Painting, cement concrete Work, Tile Work And Cupboard Wor
Tender Value
2.72 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
6 days left
EMD
5500
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Repair And Maintenance Of Residential Building At Jail Road Mandi Under Mandi Division No.Ii Hppwd Mandi, Distt. Mandi (H.P.). (Sub Head:- Providing And Laying Distempering, Painting, cement concrete Work, Tile Work And Cupboard Work Etcetera In Type-Iv Qtr. No.I & 5) .
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work with any thickness in floors and roofs laid in cement mortar including stacking material complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimetr) (thickness to specified by the manufacturer) of first quality conforming to IS : 15622 of approved make in colours such as white, lovery, gray, fume red brown, laid on 20mm (twenty millimetre) thick cement mortar 1:4 ( one cement : four coarse sand), jointing with gray cement slurry @ 3.3 Kg/sqm (at the rate of three point three kilogram per squaremetre) including pointing the joints with white cement and matching pigment etcetera complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 3 | Providing and laying Duro stone vetrified tiles (450mmx200mmx8mm) (four hundred fifty millimetre into two hundred millimetre into eight millimetre) in grey/coloured of required shade in skirting risers of steps and dados on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 4 | Repairs to plaster of thickness 12 mm (twelve millimetre) to 20 mm (twenty millimetre) in patches of area 2.5 (two point five) squaremeters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, with cement mortar 1:4 (one cement : four fine sand) including carriage of material within all leads and lifts and other incidentals complete in all respect and as per the entire direction and satisfaction of Engineer-in-Charge. |
| 5 | Providing second class deodar wood work in frames of doors, windows, clerestory,windows and other frames wrought, framed and fixed in position including carriage of material within all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge. |
| 6 | Providing and fixing 4mm (four millimetre) thick float glass panes with putty and glazing clips in steel door, window and clerestorey window complete in all respect including carriage of material within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 7 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 8 | Finishing with Deluxe Multi Surface Paint system for interiors and exteriors using primer as per manufacturers specifications. Two or more coat applied on walls @ (at the rate of) 1.25 ltr/10 sqm (one point two five litre per ten square metre) over and including one coat of special primer applied @ (at the rate of) 0.75 ltr/10 sqm (zero point seven five litre per ten square metre) of approved brand and manufacture complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction of Engineer-in-Charge. |
| 9 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etcetera complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction of Engineer-in-Charge. |
| 10 | Providing and applying white cement based putty of average thickness 1 mm (one millimetre) , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material within all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge. |
| 11 | Providing and fixing 18mm (eighteen millimetre) thick HDHMR both side prelaminated board in Shutter/shelves/cup board with butt joints and fixing with nails and screws etecetera complete with all accessories including carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 12 | Providing and Fixing decorative high pressure 1.00mm(one point zero millimetre) thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 13 | Providing and fixing 125mm (one hundred twenty five millimetre) bright/matt finished stainless steel handles of approved quality and make with necessary screws etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 14 | Providing and fixing hydraulic hinges for cup board shutter superior quality with necessary screws etcetera complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 15 | Providing and fixing 1mm (one millimetre) thick edge burnt tape of superior quality in cupboard, ward robe shutters, including fixing with necessary adhesive/screws etcetera complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 16 | Providing and fixing 18 mm (eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite stone for kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera at all levels complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 17 | Providing and laying in position cement concrete 1:2:4 (one cement: two coarse sand :four graded, crushed stone aggregate 20mm (twenty millimetre) nominal size ) including curing complete excluding the cost of centering, shuttering, in all works up to all floor level complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 18 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 19 | Providing and fixing 15 mm (fifteen millimetre) nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m (one point zero metre) spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 20 | Providing and fixing 20mm (twenty millimetre) diametre curtain rods of 1.25 mm (one point two five millimetre) thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etcetera wherever necessary complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge. |
| 21 | Providing and fixing MS BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid seprately) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender