Providing And Fixing Of Road Furniture And Ferrocover At Various Place In Nagar Palika Phulera.

Sharing tender

Providing And Fixing Of Road Furniture And Ferrocover At Various Place In Nagar Palika Phulera.-Providing and laying marking of center line and stopline etc with hot thermoplastic compound 2.5 mm thickon road/ plain surface, including reflectorising glassbeads @ 250 gms per sqm area with special applicatormachine, as per IRC:35 including cleaning the surfaceof all dirt, dust and other foreign matter, demarcationat site and traffic control involved. The finished surfaceto be level, uniform and free from streaks and holes asper clause 803 of MoRT&HSpecification including all material, labour, machinery,lighting, guarding and maintenance of diversion ,Providing and fixing “L” type bollard 135cmheight made out of 1.25mm thick M.S. sheetwelded in conical section having upper dia 15cmand lower dia 20cm with another attachment of150x150x7mm thick plate and hold fast at bottom,whole body is painted in white stove enamel andred reflective 3 band, each of 7.5cm and onereflective sheet of 15cm dia provided to itcomplete in all respect including all material,labour, diversion., Supplying and fixing of Single Moulded twinShank Raised Pavement Markers made ofpolycarbonate and ABS moulded body andreflective panels with micro prismatic lenscapable of providing total internal reflection ofthe light entering the lens face and shall upport aload of 16000 kg tested in accordance to ASTM D4280 type H and complying to Specifications ofCategory A of MORTH Circular No RW/NH/33023/ 10-97-DC) III Dt 11.06.1997. Theheight, width and length shall not exceed 50 mm,100 mm and 100 mm and with minimumreflective area of 13 Sq cm on each side and theslope to the base shall be 35+/-5 degree. Thestrength of etachment of the integrated cylindricalshanks, (of diameter notless than 19 +/- 2 mm and height not less than30+/- 2 mm) from the body is to be a minimumvalue of 700 Kgf. Fixing will be by drilling holeson the road for the shanks to go inside, withoutnails and using epoxy resin based adhesiv6 as permanufacturers recommendation and complete asdirected by the engineer. (manufactured from3M,Avery or equivalent) , Providing and fixing PVC Bump Speed Breakerssize 350 mm x 250 mm x 50 mm fitted with keyhooks complete with labour material and trafficdiversion arrangements, Providing and fixing of reinforced Ferro-Cement draincovers designed for A class loading duly marked oncover with adequate steel reinforcement havingthickness 75mm to 150mm anti corrosive bitumenpainted M.S. plate , Rim and M.S. lifting hooks,Admixtures like plasticizer, bond improving compound,shrinkage, resistance compound, abrasion resistantcomplete as per approved design etc.Standard Size600x800mm (75mm thick) for span 300 to 450mm, Standard Size 1000x800mm (100mm thick) for span451 to 700mm, Standard Size 1500x600mm (125mm thick) for span701 to 1200mm, Standard Size 2100x500mm (150mm thick) for span1201 to 1500mm ,Supplying and installation of delineators (roadway indicators, hazard markers, object markers),80-100 cm high above ground level, painted blackand white in 15 cm wide stripes, fitted with 80 x100 mm rectangular or 75 mm dia circularreflectorised panels at the top, buried or pressedinto the ground and confirming toIRC-79 and thedrawings.