Tender For Renovation Of House No. 915, (Type-9) Sector-7, Chandigarh. (Ibm No. W4/2026/26404)
Tender Value
1.06 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
1 days left
EMD
2139
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of House No. 915, (Type-9) Sector-7, Chandigarh. (Ibm No. W4/2026/26404)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Oct-2026 | Tender postponement | Date | 30-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :DSR 2.10 |
| 2 | Pipes, cables etc, not exceeding 80 mm dia DSR 2.10.1.1 |
| 3 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia DSR 2.10.1.2 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: DSR 6.1 |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand): DSR 6.1.1 |
| 6 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:DSR 17.3 |
| 7 | W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1 |
| 8 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. DSR 17.16A |
| 9 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : DSR 17.25 |
| 10 | Flat back wash basin of size 550x400 mm DSR 17.25.2 |
| 11 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings as DSR 17.28 |
| 12 | 32 mm dia DSR 17.28.2.1 |
| 13 | Providing and fixing soil, waste and vent pipes :DSR 17.35.1 |
| 14 | 100 mm dia DSR 17.35.1 |
| 15 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 DSR 17.35.1.2 |
| 16 | 75mm diameter : DSR 17.35.2 |
| 17 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 DSR 17.35.2.2 |
| 18 | Providing and fixing heel rest sanitary bend DSR 17.40 |
| 19 | 100 mm dia DSR 17.40.1 |
| 20 | Sand cast iron S&S as per IS - 3989 DSR 17.40.1.2 |
| 21 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60 |
| 22 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 23 | Sand cast iron S&S as per IS - 3989 DSR 17.60.2.1 |
| 24 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. : DSR 18.10 |
| 25 | 15 mm dia. nominal bore : DSR 18.10.1 |
| 26 | 20 mm dia. nominal bore : DSR 18.10.2 |
| 27 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :DSR 18.17 |
| 28 | 20 mm nominal bore DSR 18.17.1A |
| 29 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 30 | 45 cm length : DSR 18.21.2 |
| 31 | 15mm nominal bore DSR 18.21.2.1 |
| 32 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 33 | 15 mm nominal bore : DSR 18.46.1 |
| 34 | 20 mm nominal bore : DSR 18.46.2 |
| 35 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.t. DSR 18.48 |
| 36 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 DSR 18.49 |
| 37 | 15 mm nominal bore. DSR 18.49.1 |
| 38 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51 |
| 39 | 15 mm nominal bore. DSR 18.51.1 |
| 40 | Providing and fixing C.P. brass Stop Cock ( concealed ) of standard design and of approved quality conforming to IS: 8931 ) DSR 18.52 |
| 41 | 15 mm nominal bore : DSR 18.52.1 |
| 42 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.DSR 18.53A |
| 43 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931s . DSR 18.53 |
| 44 | 15 mm nominal bore. DSR 18.53.1 |
| 45 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. DSR 18.62 |
| 46 | 20 mm Nominal Bore DSR 18.62.2 |
| 47 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 48 | With common burnt clay F.P.S. (non modular) bricks : DSR 18.76.1 |
| 49 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. : DSR 18.77 |
| 50 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. DSR 18.78 |
| 51 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) 100 mm dia, of approved make viking |
| 52 | Provinding and fixing of C.P. Brass/ SS Towel Ring with screw etc complete in all respect of approved make Jal Model No. 36524 Warna or equivalent Model of CERA / Kerovit / ESSCO. |
| 53 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 54 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 55 | Provinding and fixing of C.P. Brass/ SS Soap Dish holder complete in all respect of approved make Jal Model No. 36540 Warna or equivalent Model of CERA / Kerovit / ESSCO |
| 56 | Providing and fixing of CP Pillar Cock of approved make |
| 57 | Providing and fixing of C.P. brass Cup ( Heavy Duty ) of approved make |
| 58 | Providing and fixing HCI Cover with frame for GT & IC of approved make |
| 59 | Providing and fixing 22\\"x16\\" (550x400) mm beveled edge mirror complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 60 | Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen Sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required of Size 27\\" x 20\\" x 8\\" of approved make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender