Tender For Balance Work Govt. Senior Secondary School Sarog Tehsil Theog Distt. Shimla, Hp (Sh:- Providing Roofing Etc.)
Tender Value
22.43 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
8 days left
EMD
45000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Work Govt. Senior Secondary School Sarog Tehsil Theog Distt. Shimla, Hp (Sh:- Providing Roofing Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Providing form work with steel plates 3.15mm ( three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm ( thirty x thirty x five millimetre).so as to give a fair finish including centering, shuttering, strutting and propping etc. in any height/depth of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in (b)In columns |
| 2 | Beams girders lintel etc. |
| 3 | Providing and laying cement concrete work 1:1.5:3 (1 Cement:1.5 Sand:3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Col.piller post and struts etc. |
| 4 | a) Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor two level. |
| 5 | Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire up to floor two level including carriage of materials within all leads and lifts and other incidentals. |
| 6 | Brick work using common burnt clay building bricks in cement mortar 1:6 (1 cement :6 sand) 2nd Class in foundation and plinth Brick work using common burnt clay building bricks in cement mortar 1:6 (1 cement :6 sand) |
| 7 | Providing woodwork in frames of doors,windows, clerestory, windows and other frames wrought,framed and fixed in position including all leads and lifts as per the direction of Engineer-in-charge. 2nd class deodar wood. |
| 8 | Providing and fixing panelled glazed or pabelled and glazed shutter for door and window and clearstory windows including brick enamelled iron butt hinges with necessary screw 40 mm thick 2nd class d/wood.including all leads and lifts as per the direction of Engineer-in-Charge. |
| 9 | Glazing with Toufened glass panes 10mm thickness i/c carriage of material with in all leads and lifts as per the direction of engineer-in-charge. |
| 10 | Providing and fixing anodized aluminum sliding door bolts anodized transparent or dyed to required shade with bolt and nut and screws etc. 300 mmx16mm |
| 11 | Providing and fixing Aluminium tower bolts (Barrel type) anodized transparent or dyed to required shades and color with screw etc. complete . 200x10mm door |
| 12 | 100X10mm Size Window |
| 13 | Providing and fixing Aluminium handels anodized transparent to dyed to requried colour of shade with necessary screws etc complete. including all leads and lifts as per the direction of Engineer-in-Charge. 150x10mm door |
| 14 | 100mm Window |
| 15 | Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3(1cement:3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 16 | Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. |
| 17 | Prepainted steel sheet in roofing over steel trusses of Kolermetal or equivelent prepainted single skin trepeziodal profile sheeting 0.60mm thickness having 1060 mm cover with (overall width 1126 mm )28 mm crest depth at 353+2 centre to centre crest distance .There will be two ribs at the centre for stiffening having crest depth of 2.5 mm . the main crest width at top of 25 mm &at lower 81 mm base metl of cold rolled steel coil with zinc coating . Top coat with regular modified polyster coating of approved shade and balancing reverse coat with polyster paint. Fixing of steel shall be with self drilling and self taping screw of size 5.5 mm dia &Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 18 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. |
| 19 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts &nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges-including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 20 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet ridges or hips up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. |
| 21 | Providing and fixing valley 60 cm overall 0.60mm thick plastic sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 22 | Providing and fixing 10cm wide and minimum 90cm over all semi circuler plain sheet gutter with iron brackets 40x5 mm size, bolts and nuts and washer etc.)including making necessary with rain water pipes xomplete as per design 0.80 mm thick including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 23 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 24 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint |
| 25 | In gratings framed guard bars,ladders,railling,brackets and similar works including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 26 | Providing and fixing on walls face100 mm dia PVC rain water pipes / ventilating pipe of 2.7 mm thick supreme or its equivelent conforming to IS No13592-92 of fire resistent ,chemical resistent and should be able to with stand tempature up to 60*C and fitting the joints all conform to IS No working preshure of not less then 4.5kg /sqm including filling the joints with approved adhesive complete. 150 mmdia pipe including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 27 | Providing and fixing on walls face110 mm dia PVC rain water pipes / ventilating pipe accessories for rain /waste water pipe including filling the joint with approved adhesive type B and material shall be accompanied by the test ceritifiting certitying the quili of material IS No diamension and warrenty PVC plain Bend 110 mm dia 2.7 mm thick. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 28 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : |
| 29 | Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters Enamel paint other than white including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 30 | Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting Readymixed paint brushing wood primer pink including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 31 | Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including leaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than whiteincluding carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 32 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement mortar 1:6 (1 cement:6 and).including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 33 | 15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement mortar 1:4 (1 cement:4 and).including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 34 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 35 | Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 36 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 37 | Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 38 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge |
| 39 | Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender