Tender For Repairs To Existing Damaged Flooring, Gates, Windows, Ventilators, Approach Road And Steps Blocks Of Bldg. No. 174, Store Section, At Hef.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Nov 2026
8 days left
EMD
24020
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Existing Damaged Flooring, Gates, Windows, Ventilators, Approach Road And Steps Blocks Of Bldg. No. 174, Store Section, At Hef.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in Soft / loose soil. |
| 2 | M & L for Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil |
| 3 | M & L for Soling (or sub base) with broker boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient & camber with 200mm soling |
| 4 | M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc.15 cm thk, spread, levelled & rammed including watering |
| 5 | Fair finished formwork to sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work (flat); vertical or to batter. |
| 6 | M & L for 75 mm thk plain cement concrete type B1, 1:2:4 mix, using 20 mm graded aggregates, in sub-floors, floors, paving including shuttering etc. & with smooth finishing the concrete pavement by using extra cement & Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green. |
| 7 | M & L for 100 mm thk plain cement concrete type B1, 1:2:4 mix, using 20 mm graded aggregates, in sub-floors, floors, paving including shuttering etc. & with smooth finishing the concrete pavement by using extra cement & Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green. |
| 8 | Forming 12mm thick Expansion joints in 150mm thick concrete slab filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A |
| 9 | M & L for providing 20mm thick Screed bed or bedding layer in cement mortar 1:6 mix for laying floor finishes |
| 10 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Except Stone) |
| 11 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 12 | M & L for brick with fly ash bricks straight or curved on plan exc 6 mean radius, built cement mortar in 1:4 |
| 13 | M & L for rendering 20 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4). |
| 14 | Raking out joints/ pointing to brick work in walls in Cement to bricks on edge in floors, surface channels, roofs, etc. |
| 15 | S & F for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete. |
| 16 | S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 17 | S & F of Powder Coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified & powder coating of any colour (Thickness of powder coated not less than 50 micron) |
| 18 | S & F for 6mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 19 | S & F for Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 20 | M & L for synthetic enamel painting on Old steel surface of any decription with preparation of surface by suitable scrapping method and red oxide primer, in single coat, then providing synthetic enamal painting in two coats etc. complete |
| 21 | M & L for preparing of surfaces & applying two coats of cement paint on old wall surfaces. |
| 22 | M & L for preparing of surfaces & applying two coats of distemper oil emulsion paint on wall surfaces. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender