Tender For Renovation Of Police Guard Room 1St Floor Bmop Rbi Kolkata
Tender Value
44.60 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
0 days left
EMD
89214
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Police Guard Room 1St Floor Bmop Rbi Kolkata
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Oct-2026 | Modification in BOQ | BOQ | 27-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Toilet Dismantling: Carefully dismantling the floor tiles upto mother slab,wall tiles upto the brickwork face,basin counter including vertical supports, sanitary fitting & fixtures,Brick partition wall,brickwall ledge partition,false ceiling,Mild steel glazed windows etc., including stacking the usable / salvage items at place directed, making good the damages matching with the surroundings and disposing off the debris out of Banks premises complying the statutory nos to KMC dump yard etc..as directed by the Engineer-in-Charge.(plan area of floor,ceiling and elevation of peripheral wall will only be considered for measurement)(use of machines for dismantling is forbidden)(Noise causing work may be restricted during office hours) |
| 2 | Providing and fixing in position approved heavy quality 100 mm sand cast iron pipes for concealed / exposed work using pipes in required length with specials of ISI :3989 make or any other approved make for soil / waste line with all fittings and specials like bends, junctions with or without door Tee, etc., with cement gasket joints, making connection with CI trap, existing lines, gully traps, manholes, cutting holes in the walls, closing the same with cement concrete and finishing with cement mortar, painting the pipes with black bitumen for concealed piping work and with two coats of first quality synthetic enamel paint of approved make and shade over a coat of metal primer for exposed piping work, providing and fixing heavy quality MS clamps, etc. The rate shall also include for scaffolding, testing, commissioning etc. all complete as directed by engineers. The rate shall include chasing in walls for concealed piping work and refilling the same after laying of pipes with plain cement concrete 1:2:4 etc. complete.100mm |
| 3 | Providing and fixing in position approved heavy quality 100 mm sand cast iron pipes for concealed / exposed work using pipes in required length with specials of ISI :3989 make or any other approved make for soil / waste line with all fittings and specials like bends, junctions with or without door Tee, etc., with cement gasket joints, making connection with CI trap, existing lines, gully traps, manholes, cutting holes in the walls, closing the same with cement concrete and finishing with cement mortar, painting the pipes with black bitumen for concealed piping work and with two coats of first quality synthetic enamel paint of approved make and shade over a coat of metal primer for exposed piping work, providing and fixing heavy quality MS clamps, etc. The rate shall also include for scaffolding, testing, commissioning etc. all complete as directed by engineers. The rate shall include chasing in walls for concealed piping work and refilling the same after laying of pipes with plain cement concrete 1:2:4 etc. complete.75mm |
| 4 | Providing and fixing 25mm nominal dia CPVC pipes(SDR 11) having thermal stability for hot and cold water supply, including all CVPC plain & brass threaded fitting, i.e fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes of fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per the direction of Bank's Engineer. |
| 5 | All are same above but for 20mm nominal dia pipes |
| 6 | Providing and fixing 40mm dia PVC pipes (HDPE, oriplast or any other approved by bank) sch. 80 quality/UPVC pipes of approved make of SCH 80 with all necessary fittings like PVC/UPVC tees, elbows, bends, G.I. clamp, hooks etc. including concealing in wall or floor, of required by cutting charges and mending damages. |
| 7 | Providing and fixing 110mm dia PVC pipes (Supreme,Astral or any other approved by bank) sch. 80 quality/ with all necessary fittings like PVC/UPVC tees, elbows, bends, G.I. clamp, hooks etc. including concealing in wall or floor, of required by cutting charges and mending damages. |
| 8 | Providing and fixing 75mm dia PVC pipes (Supreme,Astral or any other approved by bank) sch. 80 quality/ with all necessary fittings like PVC/UPVC tees, elbows, bends, G.I. clamp, hooks etc. including concealing in wall or floor, of required by cutting charges and mending damages. |
| 9 | Sunken floorProviding and applying polymer based two compound water proofing treatment to the sunken portion of the toilets, baths, kithcen etc. by using products of Sika Top seal 107,M/s Pidilite, M/s Fosroc, M/s MC-Bouchemie or any other approved equivalent in the following steps(i) Providing and applying 20mm thick water proofing cement plaster 1:4 (1 cement : 4 coarse sand) mixed with water proofing compound as per the manufacturer's specifications to the sunken floor and sides including rounding off junctions / corners with water proofing cement mortar etc. all complete (ii) Providing and applying two or more coats of two compound based polymer water proofing treatment with applicable coats (as per manufacturer's specifications) of water proofing polymer / chemical of Sika Top seal 107M/s Pidilite, M/s Fosroc, M/s MC-Bouchemie or any other equivalent approved make to the sunken floor, sides,walls etc.; testing the treated surface by ponding method(as per per feasibility) for 72 hours.(iii) Repeat the treatment till no seepage is observed on the treated surfaceNote :1. The entire sunken portion waterproofing treatment shall be completely leakproof as observed during DLP period .Any seepage observed during DLP shall be liable for redoing the entire waterproofing treatment failing which PBG will be envoked.2.Single measurement of the floor and wall shall only be considered for payment for all sub items of work |
| 10 | Providing and laying brick bat coba to the sunken floors using best quality locally available well burnt sliced bricks in cement mortar 1:4 ( 1 cement: 4 coarse sand) mixed with water proofing compound of approved make as per manufacturer's specifications, roughening the top layer of cement mortar / top surface of sunk filling with broom to receive the flooring etc. all complete as directed by Bank's engineer.Note: No deduction for squatting / w.c.pan, C.I. pipes etc. will be made for the measurement purpose |
| 11 | Brickwork Providing and constructing half brick masonry wall in superstructure using locally available 1st class bricks for partitions in cement mortar 1:4 ( 1 cement : 4 sand ) at all heights of multistoreyed building with H.B wire netting at every third layer, including scaffolding, maintaining proper line, level & plumb, necessary curing, etc all complete as per the directions of the Bank's Engineer in charge. |
| 12 | Providing and laying plain cement concrete 1:2:4(1 cement : 2 coarse Sand : 4 graded stone aggregate 20mm nominal size)mixing with polymer based waterproofing admixture over the bare RCC slab to fill the depth and to receive the vitrified tile over it all complete including labour ,carriage, curing complete as directed by Bank's Engineer.(toilets) |
| 13 | Toilet Flooring Supplying and laying approved size ,finish and shade ceramic /vitrified non-skid, non-slip tiles of approved manufacturer in flooring, laid to required level, slope and pattern on 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding set in cement slurry,jointing neatly with epoxy grout mixed with matching pigment, cleaning, curing etc complete as directed by the Bank's engineer.(Basic cost of tiles: Rs.750/- per sqm excluding GST) |
| 14 | Toilet Dado Supplying and fixing approved size ,finish and shade ceramic /vitrified glossy/matt finish tiles of approved manufacturer in Dado laid on average 12mm thick cement mortar (1:3) bedding set in cement slurry with 25-30mm backing cement mortar on brickface including jointing with polymer cement grout of matching shade or mixed with polymer and matching pigment, cleaning, curing, making good the damages, cleaning etc. all complete as directed by Bank's engineer.Use of any machine for dismantling is not permisible. (Basic cost of tiles Rs. 750/- per sqm excluding GST) |
| 15 | Wash basin counterProviding and fixing in position machine cut 20mm thick one side polished kadappa slab for wash basin with cut out of required size to accommodate countertop oval shaped basin, supported on 20mm dia “A” class GI. pipe bracket (horizontal support), including cost of cutting chases in walls fixing with cement mortar (1:3). The rate should also include cost of supplying and fixing one side polished 25mm thick vertical support of kadappa stone on each side, etc all complete as per the directions of the Bank’s Engineer. (Basic Rate of kadappa stone: Rs.520/- per Sqm) |
| 16 | Providing, laying and fixing in position minimum 18 mm thick machine cut mirror polished granite stone counter slab and vertical slab, facia etc on the kadappa stone slab of approved quality, colour and shade, complete including making cut-out of required shape and size for fixing oval shape wash basin, finishing the edges with grinding to Bull nose shape, polishing the cut edges as specified etc, cutting chases in walls & fixing with cement mortar (1:3), etc all complete as per direction of Bank’s Engineer.(Basic Rate of Granite slab: Rs.2500/- per Sqm) |
| 17 | Supplying and fixing new wash basin glazed vitreous china oval shaped under counter wash hand basin Jaquar(CNS-WHT-701)parryware/hindware(GARNET/ZEN)/porcelain sink of Jaguar/Hindware/Parryware or apporved eqv. for drinking water counter of or any approved brand approved size including fixing all type of fittings e.g 32mm dia CP waste coupling,Jaquar or equivalent make bottle trap,15mm dia wire netted PVC connector pipe 600mm long etc. all complete as per direction of Bank’s Engineer . Basic cost of wash basin Rs.2000/-each excluding GST |
| 18 | Sanitary fittings and fixturesSupplying & installing approved make & model single piece European commode(P or S trap) with cistern and hydraulic seat cover etc of Jaguar(CNS-WHT-853S220SPPSM),Parryware,Hindware or any other approved equivalent complete set including all necessary fittings accesories & hardwares including making leakproof connection with flushing cistern, cutting & chasing brick /RCC memebers/ walls, floors , removing old P/S traps if required etc. complete as directed by Bank's engineer.Wall hung commode with hydraulic seat cover (basic rate is Rs. 12,240/- excluding GST) |
| 19 | Providing and fixing white vitreous china water closet squatting pan(Indian type) alongwith \\"S\\" or \\"P\\" trap of Parryware(C01231C/C01311C) or approved eqv including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled materials all complete as per the direction of Bank's Engineer. Basic Rate of Odisa Pan is Rs 2000/- exluding GST Providing, fixing and testing approved make & model following C.P. brass bath room plumbing, sanitary fittings & accessories with flange wherever applicable, etc complete all as directed by Bank's engineer |
| 20 | 15 mm C.P. Brass fittings2 way Bib Cock with nozzle (quarter turn ) Jaguar(CON-CHR-041KN) -or of approved eqv Note: Basic rate of Bib cock Rs.1494/- each excluding GST |
| 21 | Health faucet with 8mm diameter, 1.20mt long flexible tube & wall hook as per approved make Jaguar (ALD-CHR-563) Note: Basic rate of health faucet with 8mm diameter, 1.20mt long flexible tube & wall hook is Rs.990 Each excluding GST |
| 22 | Angular Stop cock of approved make Note: Basic rate of Angular Stop cock is Rs. 1080 each excluding GST |
| 23 | Providing and fixing 25mm dia gate valve of Zoloto or any equivalent approved |
| 24 | 15mm mixer (for hot and cold water) Central hole basin pillar cock pressmatic (Jaquar PRS 031)Note: Basic rate of mixer pillar cock is Rs.2011 each excluding GST |
| 25 | Providing and fixing white vitreous urinal such as Jaquar (URS-WHT-13261H size 355x340x535mm)/ Parryware/ Hindware or any other approved equivalent brand & size by bank, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per C.I. trap with outlet grating and other couplings in C.P. brass,Bottle Trap of Jaguar or approved equivalent including painting of fittings and cutting and making good the walls and floors wherever required.Note - (Basic rate or urinal Rs.3168/- each excluding GST) |
| 26 | Providing and fixing Urinal Valve Auto Closing Built-in Control Cock & Wall Flange such as Jaquar (PRS-077)/ Parryware/ Hindware or any other approved equivalent brand & size by bank, with fittings, standard size C.P. brass flush pipe, including painting of fittings and cutting and making good the walls and floors wherever required.Note - (Basic rate Rs.2100/- each excluding GST) |
| 27 | Providing and fixing Urinal Partitions such as Jaquar (JSE-CHR-110US450X, Size 900HX450W)/ Parryware/ Hindware or any other approved equivalent brand & size by bank, with fittings, including cutting and making good the walls and floors wherever required.Note - (Basic rate Rs.4745/- each excluding GST) |
| 28 | shower tap with mixture non telephonic arrangement (Jaquar-CON 219 KN) Note: Basic rate of material is Rs. 4392/-each excluding GST |
| 29 | Shower head /rose round shape with shower arm casted 190mm long including base plate etc complete. (Jaquar OHS-1709) Basic rate of the material is Rs.2000/- excluding GST. |
| 30 | C.P. Brass fittings & accessoriesSingle towel rail 600mm long (Jaquar ACN1111SM)Note: Basic rate of Single towel rail 600mm long is Rs. 1170 each excluding GST |
| 31 | Soap dish holder JAQUAR CAN-CHR 1131NNote: Basic rate of Soap dish holder is Rs. 648 each excluding GST |
| 32 | 100mm. Anti cockroach Stainless steel floor trap grating of Nirali or approved make over the trap mouth including fixing it white cement and seal the gap peroperly . |
| 33 | 100 mm CI/PVC nahani trap/multitrap at the floor recsessed area and connecting the CI/UPVC/PVC concealed waste pipes with the cement mortar joint and perishable item all complete . |
| 34 | Mirror having (mirror glass shall be of Saint gobain,AIS,Modi guard or approved equivalent) fixed over Stainless steel studs including complete set etc as per size of washbasin area |
| 35 | Soap dispensor of approved make and model.basic rate is Rs 1200/- excluidng GST.Make and model shall be as approved by Bank's Engineer |
| 36 | Decorative Gypsum false ceiling:Providing and fixing single/multilevel false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, includingincluding jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum moisture resistant board of Saint Gobain or approved equivalent and GI channels and sections shall be of Gyproc series of Saint Gobain make or approved equivalent.The rate shall be inclusive of required scoffolding, all complete done in workmanlike manner and adhering all safety precautions, fire protective measures etc. as directed by the Bank’s Engineer. |
| 37 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer , calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, adequate screw withdrawal strength , and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. Frame size 50x125mm |
| 38 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer, calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives having minimum density of 650 kg/cum and adequate screw withdrawal strength and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. 30 mm thick avg |
| 39 | Solid Flush door for toilet main doors: Providing 1st quality Teak woodwork in frames of doors wrought framed and fixed in position with flat iron hold fast of required dia & length. Teakl wood quality and section details shall be approved by Bank's EngineerProviding 40x5 mm flat GI hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).The teak wood frames shall be finished smooth with DUCO or approved equivalent spray paint of approved shade after making necessary surface preparation,pudding works etc complete before application of spray paint as per manufacturer's specification..Providing and fixing 30mm thick factory made ISI marked BWP flush door of Century club prime or approved equivalent shutters ,Heavy duty Stainless Steel 4 set butt Hinges as approved by Bank's Engineer with necessary screws/Providing & Fixing decorative 1mm thick laminated sheet of approved make on both side approved colour shade, design, pattern including cost of marine grade adhesive./Providing and fixing Godrej or any approved eqquivalent make mortise locks, with necessary steel screws etc. complete./Providing and fixing Godrej or any approved eqquivalent make universal hydraulic door closer approved brand with necessary accessories and screws etc. complete/Providing and fixing bright finished brass(heavy duty) hanging type floor door stopper with necessary screws, etc. complete/. The sal wood frames shall be finished smooth with DUCO or approved equivalent spray paint of approved shade after making necessary surface preparation,pudding works etc complete before application of spray paint as per manufacturer's specification..(Door size avg : 2m x 2.1m) |
| 40 | Granite window and door sill Providing, laying and fixing in position minimum 18 mm thick machine cut mirror polished galaxy black granite stone slab at door sill and window sill in stepped form to restrict backflow of rainwater of approved quality, colour and shade, complete including making required shape and size for fixing , finishing the edges with grinding to Bull nose shape, polishing the cut edges as specified etc, cutting chases in walls & fixing with cement mortar (1:3), etc all complete as per direction of Bank’s Engineer.(Basic Rate of Granite slab: Rs.3000/- per Sqm) |
| 41 | Providing & applying cement plaster 1:4 (1 cement: 4 sand) of thickness 12mm (average) in single layer including raking the joints, removing dust & cleaning the surface including necessary scaffolding, including fixing of chicken mesh (by proper nailing) at least 4” wide on the joints between the junction of old and new walls/RCC surface, curing, etc all complete as per directions of Bank's Engineer. |
| 42 | Removing / Scraping / Cleaning the existing wall / surface, providing and applying two or more coats of white cement based putty of average thickness 1mm of approved brand and manufacturer over the false ceiling gypsum board,ceiling / wall surfaces etc. to prepare the surface even and smooth complete to receive the primer and paint etc. Rates shall include for scaffolding wherever required |
| 43 | Providing and applying two or more coats of premium Acrylic emulsion paint of Berger Silk Breathe Easy,Asian Royal Shine or approved make and shade to ceilings and other surfaces to give an even shade over one or more coats of internal primer(solvent thinnable) as per manufacture's specifications , including necessary scaffolding, preparation of surface etc., complete including all leads and lifts as per the directions of the Bank’s Engineer. |
| 44 | Grinding,cleaning and Mirror polishing of the existing kota stone floor, skirting by appropriate cutting stone grinding machine(using 7 distinct grades of polish stones) and hand cutting wherever required also for removing the stain including cement slurry filling matching with the existing colour as required.The rate shall also include and removing the debris from the premises all complete as per direction of Bank’s Engineer. |
| 45 | Providing and applying two or more coats of 1st quality synthetic enamel paint of approved make and shade to MS glazed windows and steel frames,Mesh windows,WPCV doors etc over surfaces to give an even shade over a coat of wooden(wood primer)/metal primer(zincchromate) as per manufactures specifications , including necessary scaffolding, preparation of surface etc., complete including all leads and lifts as per the directions of the Bank’s Engineer. |
| 46 | Wall cladding Supplying and fixing approved size ,finish and shade ceramic /vitrified glossy/matt finish tiles of approved manufacturer in Dado laid on average 12mm thick cement mortar (1:3) bedding set in cement slurry with 25-30mm or more backing cement mortar on brickface including jointing with polymer cement grout of matching shade or mixed with polymer and matching pigment, cleaning, curing, making good the damages, cleaning etc. all complete as directed by Bank's engineer.Use of any machine for dismantling is not permisible. (Basic cost of tiles Rs. 750/- per sqm excluding GST) |
| 47 | Buyback for taking away the scrap and salvagableitems generated from dismantling includingexisting old sanitary/plumbing fittings and fixtures,wooden shutters,pipelinesMS windows,false ceiling sections,old toilet doors etc etc complete asdirected by Bank's Engineer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender