Tender For Repair/ Servicing Of Hot Water Appliances,Solar Water Heater Including Connected Works Under Age E/M -Ii Of Ge (South) Meerut
Tender Value
60 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
12 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Servicing Of Hot Water Appliances,Solar Water Heater Including Connected Works Under Age E/M -Ii Of Ge (South) Meerut
BOQ
| Sl. No. | Item Description |
| 1 | Taking down the water heater (geyser) assembly of 25/ 50 ltr capacities carefully from site after disconnecting the water and electric connection, opening the geyser assembly and descalling deposited in the inner container/ Assembly and outlet water pipe set complete all as specified and directed |
| 2 | Refixing of water heater of any capacity (25/50 ltr) after repair of necessary works inlcuding all connected accessories element, thermostate, NRV, switch socket, MCB etc. complete all as specified and directed |
| 3 | Attending to Geyser complaints at site including checking and rectification of any electric fault/ water leakage and making good in all respects including minor repairs, replacement of unserviceable heating element , gate valve, air release valve, switch, socket, plug top , AC box, burnt copper wire connections whatever required complete all as specified and directed by Note- Cost of such items shall be paid under respective items ). |
| 4 | Material and labour for point wiring with 2.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLSH PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit of any size not less than 20 mm dia complete with all accessories / fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed |
| 5 | Supply only thermostat size 6/11\\" long , suitable for water heater of any capacity as per site requirement complete all as specified and directed |
| 6 | Supply only of 15 mm bore gun metal globe or gate valve ISI marked complete all as specified and directed |
| 7 | Supply only water heater element 1.5 /2.0 KW capacity with rubber ring Round/triangular type complete with clamps, nuts and bolts washers etc for geysers ISI marked as per existing complete all as specified and directed. |
| 8 | Supply only Non return valve 15mm dia made of bronze ISI marked heavy duty fixed in repairscomplete all as specified and directed |
| 9 | Supply only indicator bulb and PVC heavy duty base (Red / Green) of approved make all as specified and directed |
| 10 | Supply only spring loaded Air-release safety valve made of brass as per existing shape and size, of approved make complete all as specified and directed |
| 11 | Supply only 15mm dia PVC connection 450 mm long , suitable for hot water supply , complete all as specified and directed. |
| 12 | Supply only 15mm dia PVC connection 450 mm long , suitable for cold water supply , complete all as specified and directed. |
| 13 | Supply only of Zebra fastner of size 12x100 mm complete all as specified and directed . |
| 14 | Supply only of Zebra fastner of size 18x100 mm complete all as specified and directed . |
| 15 | Supply only of flexible copper lead 3 core of size 40/0.0076 complete and making electric connections etc. in geyser complete all as specified and directed. |
| 16 | Supply only top plug flush type 3 pin 15/16 Amps 230 volt. all as specified and directed. |
| 17 | Supply only piano type switch of 15/16 Amps 230 volt. all as specified and directed. |
| 18 | Supply only piano type socket of 15/16 Amps multipupose 230 volt. all as specified and directed. |
| 19 | Supply only metal plug top 20 Amps for geyser complete all as specified and directed |
| 20 | Supply only metal plug socket 20 Amps for geyser complete all as specified and directed |
| 21 | Supply only MCB SP, AC, 240 volts of 32 Amps, C curve, 10 kA, and making connections complete all as specified & directed. |
| 22 | Supply only cutout 2/4 pin suitable for glass line geyser of water capacity 25/50 ltr . complete all as specified and directed |
| 23 | Supply only capillary thermostat white/ pink suitable for glass line geyser of water capacity 25/50 lyr . Complete all as specified and directed |
| 24 | Supply only replacement of water heater syphon assembly steel plate with nuts and bolts, washers, clamps and rubber ring any Make of geyser, for 25/50 ltr capacity of Geysers.complete all as specified and directed |
| 25 | Supply only replacement of inner container/tank made of stainless steel for 25 litre capacity as per existing one or complete all as specified and directed |
| 26 | Supply only replacement of inner container/tank made of stainless steel for 50 litre capacity as per existing one or complete all as specified and directed |
| 27 | Supply only outer cover of 25 litre capacity water heater fabricated out of 24 gauge mild steel sheet duly painted with two coats of synthetic enamel paint white colour over a coat of red oxide primer inside and outside cover of any type of geyser as per existing one or complete as specified and directed |
| 28 | All as per srl item No. 27 above but 50 ltrs Geyser capacity. |
| 29 | Material only for preparation of old steel surfaces of geyser of capacity 25/50 litres and applying with one coat of synthetic enamel paints white and writing GE(S) MES with black enamelled paint not less than 6 cm wide complete all as specified and directed. |
| 30 | Supply only replacement of bottom cover for geyser in two pieces made of GI sheet duly painted in required/existing size and shape suitable for 25 litres capacity geyser complete all as specified and directed. |
| 31 | All as per item No 30 here-in-before but for 50 ltr capacity Geysers. |
| 32 | Material only for rock wool after removing the existing unserviceable Glass wool in between the inner and outer cell of Geyser of any cap and Make, complete all as specified and directed. |
| 33 | Supply & fixing in replacement industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified and directed |
| 34 | Supply and fix in repair copper cable single core PVC insulated size -1.5mm complete all specifed and directed. |
| 35 | Supply and fix in repair cable single core PVC insulated size -2.5mm complete all specifed and directed. |
| 36 | Supply and fix in repair cable single core PVC insulated size -4 mm complete all specifed and directed. |
| 37 | Supply and fix in repair plastic conduit pipe size 20/25mm for protection of cable complete all as specified and directed. |
| 38 | Supply only of flexible copper lead 3 core of size 2.5 sqmm complete and making electric connections etc. in geyser complete all as specified and directed. |
| 39 | Material and labour in replacement of sub main wiring with 6.0 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC surface conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making connection complete all as specified & directed. Note:- One meter of conduit along with 2x 6.0 Sq mm wire and one 6.0 sq mm earth shall be measured as one unit length. |
| 40 | Material and labour in replacement of sub main wiring with 4.0 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 4.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC surface conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making connection complete all as specified & directed. Note:- One meter of conduit along with 2x 4.0 Sq mm wire and one 4.0 sq mm earth shall be measured as one unit length |
| 41 | Dismantling solar water heating system panel of 100 litres capacity, any Make and type by removing the glass panel carefully and refixing it after cleaning dust, cleaning the water collector tubes and aluminium foil including descaling the existing hot water storage tank of any capacity and replacement of rock wool complete all as specified and directed |
| 42 | All as per Serial item No. 41 above here-in-before but of 200 litre capacity. |
| 43 | All as per Serial item No. 41 above here-in-before but of 300 litre capacity. |
| 44 | All as per Serial item No. 41 above here-in-before but of 500 litre capacity. |
| 45 | Supply and fix in replacement glass panel rubber beeding of approved quality, complete all as specified and directed |
| 46 | Supply and fix in replacement heating element of 5000W, B.S.P with thermostat pocket and metal cap all as per existing one and complete all as specified and directed |
| 47 | Supply and fix in replacement heating element of 3000W, B.S.P with thermostat pocket and metal cap all as per existing one and complete all as specified and directed |
| 48 | Supply and fix in replacement heating element of 2000W, B.S.P with thermostat pocket and metal cap all as per existing one and complete all as specified and directed |
| 49 | Supply and fix in replacement heating element of 1000W, B.S.P with thermostat pocket and metal cap all as per existing one and complete all as specified and directed |
| 50 | Supply only thermostat size 11\\" long , suitable for water heater of any capacity as per site requirement complete all complete all as specified and directed |
| 51 | Supply & fix in replacement of Solar water heater storage tank of capacity 300 ltr with MS stand of strandard size , inlet/ outlet,over flow water pipe connections complete with nuts and bolts of suitable size and PCC work in 1;2;4 ratio as required at site including taking down old UNSV complete all as specified and directed |
| 52 | Supply & fix in replacement of Solar water heater storage tank of capacity 200 ltr with MS stand of strandard size , inlet/ outlet,over flow water pipe connections complete with nuts and bolts of suitable size and PCC work in 1;2;4 ratio as required at site including taking down old UNSV complete all as specified and directed |
| 53 | Supply & fix in replacement of flat plate collector panel for solar water heater size of each plate 1000x 2000 mm ( 03 Plates) complete with copper tubing, tuffend glass, rubber beeding, inlet and outlet water connections to each other of capacity 300 LPD ISI marked (complete Copper panel) including taking down old unsv complete all as specified and directed |
| 54 | Supply & fix in replacement of flat plate collector panel for solar water heater size of each plate 1000x 2000 mm complete with copper tubing, tuffend glass, rubber beeding, inlet and outlet water connections 100 LPD ISI marked including taking down old unsv complete all as specified and directed |
| 55 | Supply & fix in replacement of tuffend glass suitable for flat plate collector panel of size 1000x 2000 mm complete with rubber beeding after removing the existing broken glass carafully and cleaning completely all as specified and directed |
| 56 | Supply / laying and fixing 25mm bore galvanised steel tubing medium grade with all fittings, laid in trenches, under road or fixed to wall with clamps and nuts and bolts of suitable size for cable protection complete all as specified and directed. |
| 57 | Supply / laying and fixing 40 mm bore galvanised steel tubing medium grade with all fittings, laid in trenches, under road or fixed to wall with clamps and nuts and bolts of suitable size for cable protection complete all as specified and directed. |
| 58 | Supply & fix in replacement of rubber hose pipe heavy duty for hot water of size 32 / 25mm inner dia for fixing in tank to panel and panel to panel as required at site including 02 nos of SS clamp adjustable clamp with brass nut ccomplete all as specified and directed |
| 59 | Supply and fix in replacement gun metal gate valve 40mm dia with wheel ISI marked complete all as specified and directed |
| 60 | Material and labour in replacement of insulation to hot water pipe of size 40mm bore with glass wool wripped with chiken mess wire of suitable gauge and aluminium foil complete all as specified and directed |
| 61 | Material and labour in replacement of insulation to hot water pipe of size 32mm bore with glass wool wripped with chiken mess wire of suitable gauge and aluminium foil complete all as specified and directed |
| 62 | Material and labour in replacement of insulation to hot water pipe of size 25mm bore with glass wool wripped with chiken mess wire of suitable gauge and aluminium foil complete all as specified and directed |
| 63 | Material and labour in replacement of GI union of size 40mm bore complete with fixing and testing.complete all as specified and directed |
| 64 | Material and labour in replacement of GI union of size 25mm bore complete with fixing and testing.complete all as specified and directed |
| 65 | Material and labour in replacement of GI Elbow of size 40mm bore complete with fixing and testing.complete all as specified and directed |
| 66 | Material and labour in replacement of GI Elbow of size 25mm bore complete with fixing and testing.complete all as specified and directed |
| 67 | Material and labour in replacement of GI nipple upto 100mm long of size 40mm bore complete with fixing and testing.complete all as specified and directed |
| 68 | Material and labour in replacement of GI nipple upto 100mm long of size 25mm bore complete with fixing and testing.complete all as specified and directed |
| 69 | Rotational moulded polyethylene water storage tanks 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position including taking down old unsv complete all as specified and directed |
| 70 | Rotational moulded polyethylene water storage tanks 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position including taking down old unsv complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender