Tender For Electrical Landscaping Work For Residential C Us
Tender Value
58 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
10 days left
EMD
1.16 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikode → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrical Landscaping Work For Residential C Us
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, fabricating, installing, testing and commissioning of outdoor floor-mounted weatherproof LT control panel fabricated from 14 SWG galvanized sheet /CRCA sheet steel, dust and vermin proof, having minimum IP55 degree of protection, complete with sloping canopy, hinged lockable front door, removable gland plate, cable alley, earthing studs, danger notice, and powder-coated finish . The panel shall be of adequate size to accommodate one No. 6-way TPN vertical distribution board, along with suitable syntax box with DIN rail arrangements for mounting one no. contactor, one no. programmable digital timer, and associated control accessories including a 4P MCB. The panel shall be complete with internal wiring, terminal blocks, connectors,mounting brackets,fasteners,sealing gaskets,cable entry provisions, gland plate, interconnections, hardware, and all accessories required for satisfactory operation. The panel shall be provided with a suitable MS pedestal/stand fabricated from structural steel sections, securely fixed to a PCC foundation using approved anchor fasteners. The panel shall be designed in accordance with relevant IS and IE rules. Detailed fabrication drawings, dimensions, component layout, and foundation drawings shall be submitted to the Engineer-in-Charge for approval prior to commencement of fabrication. The item shall be complete in all respects including installation, testing, commissioning, and handing over as required. |
| 2 | Supplying, fabricating, installing, testing and commissioning of outdoor floor-mounted weatherproof LT control panel fabricated from 14 SWG galvanized sheet /CRCA sheet steel, dust and vermin proof, having minimum IP55 degree of protection, complete with sloping canopy, hinged lockable front door, removable gland plate, cable alley, earthing studs, danger notice, and powder-coated finish . The panel shall be of adequate size to accommodate one No. 4-way TPN vertical distribution board, The panel shall be complete with internal wiring, terminal blocks, connectors,mounting brackets,fasteners,sealing gaskets,cable entry provisions, gland plate, interconnections, hardware, and all accessories required for satisfactory operation. The panel shall be provided with a suitable MS pedestal/stand fabricated from structural steel sections, securely fixed to a PCC foundation using approved anchor fasteners. The panel shall be designed in accordance with relevant IS and IE rules. Detailed fabrication drawings, dimensions, component layout, and foundation drawings shall be submitted to the Engineer-in-Charge for approval prior to commencement of fabrication. The item shall be complete in all respects including installation, testing, commissioning, and handing over as required. |
| 3 | Supplying and fixing 6 way(8+18), vertical type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)Legrand or techno equivalent etc. |
| 4 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (8 + 12), Double door |
| 5 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A |
| 6 | Supplying and fixing 6-32A , Four pole, 430 V, C curve Miniature circuit breaker (MCB) in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 7 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple Pole |
| 8 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single Pole |
| 9 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 A |
| 10 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Upto 35 sq. mm |
| 11 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Upto 35 sq. mm |
| 12 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 13 | Supplying and laying of 50 mm / 38 mm ISI-marked DWC HDPE pipe, including all necessary accessories such as sockets, bends, couplers, etc., conforming to IS 14930 (Part II). The work shall include cutting, jointing, fitting, and laying of the pipe either in the existing trench complete as required. |
| 14 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm) |
| 15 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 16 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (28mm) |
| 17 | Supply of 1.1 kV grade 4C x 25 sq.mm, Aluminium conductor XLPE insulated PVC sheathed round wired armoured power cable(as per IS ) as required. |
| 18 | Supply of 1.1 kV grade 4C x 16 sq.mm, Aluminium conductor XLPE insulated PVC sheathed round wired armoured power cable(as per IS ) as required. |
| 19 | Supply of 1.1 kV grade 2C x 10 sq.mm, Aluminium conductor XLPE insulated PVC sheathed round wired armoured power cable(as per IS ) as required. |
| 20 | Supply of 1.1 kV grade 4C x 10 sq.mm, Aluminium conductor XLPE insulated PVC sheathed round wired armoured power cable(as per IS ) as required. |
| 21 | Supply of 1.1 kV grade 3C x 2.5 sq.mm, Copper conductor XLPE insulated PVC sheathed round wired armoured power cable(as per IS ) as required. |
| 22 | Supply of 1.1 kV grade 3C x 4 sq.mm, Copper conductor XLPE insulated PVC sheathed round wired armoured power cable(as per IS ) as required. |
| 23 | Supplying and laying of 3X2.5 Sq.mm. ISI marked PVC insulated and PVC sheathed copper single core and multi-core shaethed bright annealed bare copper flexible cables for voltage grade 1.1 KV grade as required.(Make:,RR cable,KEI,Polycab or equvalent) including necessory clamps, screw etc. as required |
| 24 | Supplying and laying of 3X1.5 Sq.mm. ISI marked PVC insulated and PVC sheathed copper single core and multi-core shaethed bright annealed bare copper flexible cables for voltage grade 1.1 KV grade as required.(Make:,RR cable,KEI, Polycab or equvalent) including necessory clamps, screw etc. as required |
| 25 | Supply and laying of 3 inch 80 NB GI pipe (medium class B) on ground with all accessories like socket, bend, couplers with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., and making good the damages of road with concrete mixture of 1 : 2 : 4 including watering & ramming etc. as required. |
| 26 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. (but without charcoal/ coke and salt ) as required. |
| 27 | Providing and fixing 25 mm X 6 mm G.I strip on surface or in recess for connections etc. as required. |
| 28 | Providing and fixing 25 mm X 3 mm G.I strip on surface or in recess for connections etc. as required. |
| 29 | Supply of suitable amount (60kg) of earthing compound (EXCEL compound or equivalent) etc. as required. |
| 30 | Supply and laying one number of the 12 SWG good quality bare copper wire along the cable with connections etc. as required. |
| 31 | Supply and laying one number of the 14 SWG good quality bare copper wire along the cable with connections etc. as required. |
| 32 | Supplying and fixing cable details tags using Aluminium sheet of size 10 cm X 3 cm X 2 mm or nearest size on the existing cable. |
| 33 | Supply and providing GI pipe earthing for streetlight with 2.5 Meter long, 40 mm dia GI pipe, drilling holes on the pipe as per IS standards with zinc coating, providing masonry enclosure with cover plate having locking arrangement, including connection to Street Light Earth terminal with 25 x 3 mm GI flats, and providing a copper bus bar at the foundation of the street light for termination and interconnection of the earthing system, including all necessary materials, nuts, bolts, clamps, connectors, labour and other accessories as required. In case a bimetallic strip/connection is used, necessary safety precautions and suitable measures shall be provided to prevent galvanic corrosion and ensure a safe and reliable connection. Complete in all respects. |
| 34 | Supply and fixing ,testing and commissioning 24 Hour Digital Time switch (crono)for operating automatic ON-OFF function 110 - 240 VAC 1 C/O Base/DIN 25 ON/OFF Each,L&T 67DDT0 or equivalent. |
| 35 | Supplying ,Installation ,Testing and Commissioning of 3 pole power contactor,Type MNX40,240V coil voltage. |
| 36 | Marking on existing panel boards using paint (incoming, outgoing, cable size, switchgear rating etc) as required/ instruction from Engineer in charge. |
| 37 | Supplying, installing, testing and commissioning of 200 x 238 x 111 or suitable size weatherproof junction/distribution box suitable for outdoor installation, complete with cable entry/exit provisions for 4-core 10 sq.mm cables, 3-phase loop-in/loop-out arrangement, 1 No. DP RCCB and 2 Nos. SP outgoing MCBs of suitable ratings, including DIN rail, cable glands, lugs, terminal blocks, neutral and earth terminals, internal interconnections and all necessary accessories. The box shall be securely fixed by suitable clamps/brackets to the pole or foundation, as applicable, complete with necessary hardware, testing and commissioning in accordance with relevant IS/IEC standards and CPWD specifications. (make Hensel or approved equivalent) |
| 38 | Charges for concreting with 30 x 30 x 70 cm up to ground level and 20 cm above ground level using 8 mm steel reinforcement with cement concrete of 1:1.5:3, after excavation and plastering the sides including a neat cement flushing coat, painting with cement paint etc, as required.A preliminary foundation drawing shall be submitted and approval obtained from the Engineer-in-Charge prior to commencement of the foundation work. |
| 39 | Charges for concreting with 20 x 20 x 50 cm up to ground level and 10 cm above ground level using 8 mm steel reinforcement with cement concrete of 1:1.5:3, after excavation and plastering the sides including a neat cement flushing coat, painting with cement paint etc, as required.A preliminary foundation drawing shall be submitted and approval obtained from the Engineer-in-Charge prior to commencement of the foundation work. |
| 40 | Charges for concreting with 30 x 30 x 80 cm up to ground level and 30 cm above ground level using 8 mm steel reinforcement with cement concrete of 1:1.5:3, after excavation and plastering the sides including a neat cement flushing coat, painting with cement paint etc, as required.A preliminary foundation drawing shall be submitted and approval obtained from the Engineer-in-Charge prior to commencement of the foundation work. |
| 41 | Supply, installation, testing and commissioning of 10 W outdoor LED landscape light, BAJAJ TLLUM 10W 30K 80 C3 GW S or approved equivalent, having 10 W system wattage, 3045 K ±175 K CCT, 850 lm luminous flux, luminaire efficacy 85 lm/W, CRI >70, input voltage 140–270 V AC, PF >0.90, THD <15%, 4 kV built-in surge protection, IP65 ingress protection and IK07 impact protection, with 50,000 hours lumen maintenance, die-cast aluminium top cover with extruded aluminium housing, powder-coated finish in Graphite Grey (RAL 7024) with white (RAL 9003) side supporting triangle, anti-glare UV-stabilized clear opal acrylic diffuser and constant-current electronic driver with high-voltage protection, including all necessary accessories, mounting/fixing hardware and incidental materials, fixing securely to the prepared foundation/base, alignment and positioning, installation, testing and commissioning, complete in all respects.Before installation, approval shall be obtained from the Engineer-in-Charge by submitting the necessary test certificates, technical documents, product images/catalogue photographs, detailed structural drawings and warranty certificate/details from the OEM for a minimum period of 3 years. |
| 42 | Supply, installation, testing and commissioning of 12 W outdoor garden/landscape bollard light, LUKER DUNE B8, Model/Code LODBS12 or approved equivalent, having 12 W wattage, suitable for WH/WW light colour, aluminium die-cast body, silver grey finish and IP54 ingress protection, as per the original OEM technical datasheet. The item shall include all necessary mounting/fixing arrangements, brackets, base plate, foundation/fixing bolts, nuts, washers, connectors, cable termination accessories, internal wiring and other electrical and mechanical accessories required for complete installation. The luminaire shall be securely fixed to the prepared foundation/base with proper alignment and orientation.Before installation, approval shall be obtained from the Engineer-in-Charge by submitting the necessary test certificates, technical documents, product images/catalogue photographs, detailed structural drawings and warranty certificate/details from the OEM for a minimum period of 3 years. |
| 43 | SITC of 45 W LED Post-Top Luminaire, Bajaj Borage Nx 45 W or technically and commercially equivalent model of any reputed make as approved by the Engineer-in-Charge (EIC), having 45 W rated power, 120 lm/W efficacy, warm white, 3000 K or 5700 K CCT, IP66 ingress protection, IK08 impact protection, THD <10%, high-quality die-cast aluminium housing and UV-stabilized clear polycarbonate diffuser, complete with integral LED driver/control gear and all necessary accessories, fittings, mounting adaptor/spigot suitable for 60 mm diameter pole, clamps, fasteners, nuts, bolts, washers, gaskets, connectors, internal wiring and all other materials required for secure mechanical and electrical installation, alignment, testing and commissioning, complete as directed by EIC. Before procurement/installation, the contractor shall submit the manufacturer's technical sheet, product description and construction/technical details of the offered luminaire and demonstrate one complete sample of the proposed light to the EIC if possible ; the technical sheet, description, construction and physical arrangement of the luminaire shall be examined and approved by the EIC, and installation shall be undertaken only after such approval. An OEM warranty certificate with minimum of 3 years shall be provided to the Engineer-in-Charge after installation. |
| 44 | SITC of 3.0 m decorative GI pole for post-top LED luminaire, reference model BJPL 01 3M ECO POLE (TOP DIA. 48 MM) or technically and commercially equivalent model of any reputed make as approved by the Engineer-in-Charge (EIC), manufactured using high-quality GI pipe with galvanizing thickness of more than 35 microns, complete with all necessary accessories and fittings required for installation and fixing of a 48 mm diameter post-top luminaire, including suitable top mounting arrangement/adaptor, base plate, foundation bolts, nuts, washers, fasteners, internal cable routing provisions and all other accessories required for proper erection, alignment, secure fixing and commissioning of the pole, complete as directed by EIC. The contractor shall submit the manufacturer's technical sheet, product description and technical/construction details of the offered pole and shall demonstrate the same to the Engineer-in-Charge for examination and approval before installation. The pole shall be installed only after approval of the submitted technical details and demonstration by the EIC. |
| 45 | Supply, installation, testing and commissioning of Geometric Pole with LED pole light, Jaquar Bright Scape Pole, Model OPO-BLK-PSSQDA7560CWT35M or approved equivalent, complete with the pole structure and integrated LED luminaire as per the original OEM technical datasheet, including all necessary mounting arrangements, brackets, base plate, foundation bolts, nuts, washers, electrical accessories, internal wiring, cable termination accessories and other fittings required for a complete and operational installation. The LED luminaire shall be of 60 W wattage, CRI ≥70, CCT 5700 K, luminous flux 6000 lm, asymmetric beam distribution and IP65 ingress protection, or strictly as specified in the submitted OEM technical datasheet for the quoted model. The pole shall be securely fixed to the RCC foundation using suitable foundation bolts and fixing hardware, including alignment, grouting and all associated installation works.Before installation, approval shall be obtained from the Engineer-in-Charge by submitting the OEM technical datasheet, test certificates, product images/catalogue photographs, detailed structural and foundation drawings, electrical details and warranty certificate/details from the OEM for a minimum period of 3 years. |
| 46 | Supply, Installation , Testing and Commisioning of LED Spike light with die-cast aluminium housing designed for rugged outdoor usage minimum IP 65 protection ,IK 06 rating,efficacy 60 lumens/wattminimum wattage of 9W or above including giving connections with required length of 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc with all necessary accessories etc. as required.(Bajaj BL SPYKZ Nx 9W or equivalent techno commercial model as approved by engineer in charge) |
| 47 | Supply, Installation , Testing and Commisioning of LED Bush light with die-cast aluminium housing designed for rugged outdoor usage minimum IP54 protection ,minimum wattage of 9W or above including giving connections with required length of 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, fixing on existing foundation with necessary arrangements , making good the damages, colour washing etc with all necessary accessories etc. as required.(Luker Cube Series or equivalent techno commercial model as approved by engineer in charge) |
| 48 | Dismatling of metallic pole of following length errected in cement concrete including excavation, removing/cutting the pole from the concrete and refilling etc and transportation of pole to yard. as required. Above 6.5 Meter and upto 8.0 Meter |
| 49 | Demolishing of street light plinth and disconnection ,isolation and cutting of cables etc.as required. |
| 50 | Dismantling existing light fittings from the pole with/with out rad/clamp using ladder/scaffolding arrangements and handing over to EMU store safely as required Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender