Tender For Civil And Mep Works For Setting Up Physiotherapeutic Centre For Hindlabs At Ulloor, Thiruvananthapuram
Tender Value
60 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
8 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Civil And Mep Works For Setting Up Physiotherapeutic Centre For Hindlabs At Ulloor, Thiruvananthapuram
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Providing and fixing partition wall made of twin-layer construction using 12 mm thick commercial plywood conforming to IS: 1328 (BWR type) / ISI IS:303 Grade, of approved make, with decorative lamination on the exposed face and balancing lamination on the other face, using minimum 1.0 mm thick laminate hot-press bonded with approved adhesive (3M / Henkel or equivalent) in approved colour and pattern, complete. The minimum overall width of the twin-layer partition shall be 75 mm, including internal framework made of 18 mm thick BWR grade plywood, with fixing arrangement as per design. The top and side edges of the partition shall be finished with minimum 80 mm wide border using 16 mm thick BWR grade plywood on face edges with white laminate, with the top exposed surface finished in high-gloss laminate, and all exposed edges sealed with minimum 1.3 mm thick matching glossy PVC edge band, complete. Necessary decorative grooves shall be provided at all joints in laminate. The partition shall be firmly fixed to floor and adjoining walls, true to line, level and plumb, complete as directed by the Engineer-in-Charge. Measurement shall be in elevation, and only the front elevation area shall be measured for payment. (Approved makes: Plywood / Century / Greenply; Laminate/ Century / Merino / Greenlam or equivalent.) |
| 3 | Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including top & bottom fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge. |
| 4 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately) |
| 5 | Supply of Fowler Bed with Mattress & Cushion (for Hospital Purpose) having Top flat platform made of perforated CRC sheet of thickness of 16G or better. Bed frame must be sturdy and stable to support weight of at least 170 kg. The frame structure should be made up of at least 16 G CRC, rectangular / circular pipe of 100 mm x 30 mm and mounted on trolley base made up of 100mmx30mm CR C rectangular pipe of 16 gauge. All adjustments for fowler position must be obtained from crank shaft, manually operated with stainless steel/ABS foldable handle on both the shaft. Fowler bed should be of following dimension: Mattress area of Length 2000 to 2010 mm x Width 800 to 900mm x Height: - 500 to 550mm (without mattress). The finished bed must be rust proof, pre-treated and polished Stainless Steel. The bed should have telescopic side rails of stainless steel of 22 Gauze with spring loaded locking arrangement on both sides. Should have easily removable head and foot panels made up of ABS plastic. Should have strong & good quality single wheeled total locking type Swivel Castors of 125 to 150 mm diameter with breaks on all four castors for stabilized position. There should be suitable buffer mechanism to avoid hitting of the bed to the wall from all sides. Should have provision of fixing suitable rod for hanging intravenous / irrigation fluid bottle on both sides at head end and foot end. Each bed should be supplied with 1 no. good quality I. V. rod. Should have hooks on bed frame on both side for holding urine / drainage bag (at least 2 Nos. on each side). Hooks should be in-turned to prevent injury to bystander. Bed production facility to be US FDA registered. Bed to be European CE and facility to be ISO 9001, 14001 and 13485 approved. Mattress to be four sectional and to be combination of good quality foam and coir layer and exactly fitting to the bed. |
| 6 | Supply of Wooden Physiotherapy Examination Table with Storage Shelf. The table measures approximately 1800 mm × 600 mm × 750mm and should use premium hardwood construction |
| 7 | Hospital Cubicle Curtain Work: Providing, stitching, and fixing stain-retardant and fire-retardant hospital cubicle curtains suitable for X-ray room, ultrasound room, screening area, and general patient privacy partitions, made from approved quality polyester/antimicrobial fabric of minimum 180-200 GSM, washable and colour-fast, with mesh/net panel not less than 300 mm at the top for ventilation and fire safety compliance, and overall finished curtain height not less than 2.10 m, including full-length pleating (minimum 1.5 times fullness), reinforced heading tape, stainless steel or nylon hooks/rollers, and proper hemming at bottom. The work shall include supply of cloth (minimum rate Rs. 300 per metre or above), stitching, finishing, and fixing to existing or new ceiling-mounted aluminium curtain track/rod, complete in all respects as directed by the Engineer-in-Charge. Rate shall be measured and paid per running metre (Rmt) of curtain track/rod length, inclusive of fabric quantity, stitching, accessories, labour, wastage, and all incidental charges, but excluding the cost of curtain track/rod if supplied separately, complete. |
| 8 | Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 150mm/230mm/300 mm thick with Grade- I AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). |
| 9 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. |
| 10 | Supply, installation, and commissioning of interlocking foam mats made from high-quality EVA (Ethylene Vinyl Acetate) material designed for gym and fitness environments. The mats should come in| Im x Im sections, with a thickness of at least 1.5cm to provide| cushioning and protection for floors during high-impact exercises. The interlocking design should ensure a secure, seamless fit without] the need for adhesive, with beveled edges for easy installation and safety. Each mat should have a non-slip, textured surface for| improved traction and stability during use. The EVA material should| be durable, water-resistant, easy to clean, and free from harmful chemicals such as phthalates, ensuring both safety and longevity. The| mats should be lightweight, easy to store, and capable of withstanding] heavy use in commercial settings. Make :- Boldfit, Powermax, Kobo, Durafit, Cockatoo etc. |
| 11 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 12 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 13 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm |
| 14 | Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm |
| 15 | Executive Table 2100mm*750mm*750 mm, made of 18 mm Thick Medium Density Fibre Board with decorative laminate Laminate on one side and balancing laminate on inside. 8 Module Flip Boxes with Supply Box having min 3 nos universal type power socket controlled by One switch, 1 data points on table top including divided power and control cable & wire ways from end to end should be provided. Storage Unit to be provided as fixed on the Table. Storage unit of 600mm*750mm*650mm made of 18 mmm thick MDF with decorative laminate on visible sides and balancing laminate on inside areas all complete with lock, handles, channels and all necessary fixing arrangemnts and fittings all complete. The storage unit comprises of 3 drawers. All Edges finished with 2mm thick edge band of approve shade and colour. All as per designs as per instructions of the Architect/ Engineer in charge. |
| 16 | Work Station- Providing and fixing Linear workstation table unit of size 1200 × 600 × 750 mm (L×W×H) with pedestal. All sufficient frameworks are to be made up of powder-coated MS steel tubes of size 40x40x2 mm and side panelled vertical supports and backside partition are to be made with 1.5 mm thick perforated MS sheet panels. Table top should be made with 25 mm thick prelaminated MDF and all edges to be fixed with 2mm thick edge beadings. All workstation should have a 8 module flip boxes and with 3 nos universal type power 6A socket controlled by One switch, 2 data points one for network and other for IP PBX , separate power and data cable raceways also to be provided. Table top sides to be fixed with 10 mm thick frosted toughened glass panels having 400mm ht at sides and 400mm fabric-covered magnetic middle panel made with 12mm thick MDF to be fixed in the backside of table top and including all as per the drawings and instruction of Engineer In Charge.Providing and fixing pedestal storage unit of size 450 × 450 × 650 mm (W × D × H) with three (3) drawers, made out of 18 mm thick pre-laminated medium density fibre board (MDF) conforming to IS:14587:1998, using Grade-I (exterior grade) boards, finished with decorative laminate on one side and balancing laminate on the other side, complete with drawer channels, individual locks, and handles, and all fittings wherever required; all exposed edges sealed with 2.0 mm thick PVC edge banding tape of approved brand; complete including fabrication, fixing, installation, transportation, loading, and unloading, executed in all respects as per drawings and directions of the Engineer-in-Charge. |
| 17 | High back executive chair- Suppply and Installation of 360 degree revolving type High back mesh chair with adjustable lumbar support, Adjustable head rest, Seats made of High resilience Polyurethane foam upholstered with fabric. Height adjustable lumbar support pad with 3 Dimensional adjustable arm rests, Auto Weight Sensing mechanism with multi position locking system, puneumatic height adjustment gas list of class 4. Base to be of Nylon with twin wheel castors. The cairs supplied should be BIFMA certified |
| 18 | Medium back executive chair-Suppply and Installation of 360 degree revolving type medium back mesh chair with adjustable lumbar support, Seats made of High resilience Polyurethane foam upholstered with fabric. Height adjustable lumbar support pad with 2 Dimensional adjustable arm rests, Auto Weight Sensing mechanism with multi position locking system, puneumatic height adjustment gas list of class 4. Base to be of Nylon with twin wheel castors. The cairs supplied should be BIFMA certified |
| 19 | Non revolving Visitors chair-Suppply and Installation of Fixed type cantiliver medium back mesh chair with Seats made of High resilience Polyurethane foam upholstered with fabric, with fixed arm rests. The cairs supplied should be BIFMA certified |
| 20 | Providing & laying storage shelves made up of 18mm thick BWR Plywood with 1mm thick laminate on exposed surface in open shelves with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). Storage unit depth 400 mm. (Note: Only front elevation area will be considered for making payment). Design to be done as per the instructions of the Architect/ Engineer in Charge |
| 21 | MS Powder-Coated Cushioned Airport Type Three-Seater Waiting Chair: Providing and supplying airport type three-seater waiting chair having main frame made of heavy duty mild steel (MS) tubular/rectangular section with central beam support, finished with epoxy powder coating of approved shade and thickness not less than 60 microns. Each seat shall be ergonomically designed with cushioned seat and back made of high-density PU foam upholstered with superior quality rexine/fabric, fixed securely to the frame. The chair shall be provided with MS armrests between seats, sturdy MS legs fitted with PVC/nylon bushes for floor protection, suitable for heavy-duty use in hospital waiting areas. The overall size shall not be less than 1500 mm length with minimum 450 mm seat depth and 450 mm seat height. The item shall include all materials, labour, fittings, transport, handling and placing at site complete as per the direction of the Engineer-in-Charge. |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick Fixing with hinges of required size and necessary screws (Note: Hinges and necessary screws hall be paid separately) |
| 23 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 24 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (Copper oxidized as per IS : 1378)250x10 mm |
| 25 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 :2011 (Board with BIS certification marks) |
| 26 | Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit. |
| 27 | Designer Reception Table of size 240 cm x 75 cm x 75 cms with 30 cm width counter top at 105 cm made of 18mm/12mm approved make using boiling water proof plywood (710 grade including 2 drawer units (each unit comprises of 2 nos.drawers having outer dimension of 15 cm height and one no.of height 35-40cms)on both ends finished with fixing of approved make 12mm thick acrylic solid surfaces on all visible exposed surfaces (excluding inside of drawer units)including the cost of 6 nos. designer handles for drawers, required provision /cutouts for Power/Data plates installation , complete as per the design. |
| 28 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 29 | Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge |
| 30 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding over Aluminium rectangular tube of minimum size 50x25x2mm, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics including all required & complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 31 | Providing and fixing 3M Fasara frosted etching film of thickness 25 microns self-adhesive of approved colour, shade, and quality with cutting as per approved design and pattern, including cleaning of glass and making surface smooth for fixing of film to the surface, all completed as per the direction of the engineer in charge. |
| 32 | Vinyl Glass Stickers for Branding : Supply and pasting of Vinyl Glass Stickers in approved size and design in glass partition and door as per the instruction of Engineer in Charge. |
| 33 | Providing and fixing non-illuminated foam board signage of approved design, size and colour, made from high-density PVC foam board (Sunboard or equivalent) of minimum 5 mm thickness, suitable for indoor application, finished with high-quality digital printed vinyl / self-adhesive vinyl (minimum 720 dpi, 6?8 pass printing) as per approved artwork, including surface preparation, pasting, trimming and neat edge finishing. The foam board shall be fixed to wall, partition or ceiling using approved adhesive, double-sided tape, screws with caps or spacers, including all necessary fittings, hardware, labour, scaffolding and incidentals, complete as directed by the Engineer-in-Charge. Measurement shall be in square metre of finished exposed area. |
| 34 | Backlit Acrilic Board with projected letters: Supply, installation, testing and commissioning of weatherproof backlit acrilic board with projected letters made upof 20mm thick acrilic board and having box depth of min 100mm in approved size and design with reqired LED strips for high glow light. The board shall be fabricated and fixed over suitable welded and painted 25X25X3mm MS angle frame in suitable location and in proper line and level with all necessary fastners, supports etc.Electrical works likes electrical wirings, connections, fittings, externaly fixed weather proof 2/3 pin plug points and sockets including boxes etc. to be complete properly.All fabrication and fixing should be done as per approved design and instructions of Engineer in Charge. (Note: Only front elevation will be measured.) |
| 35 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal dia pipes |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work100 mm nominal dia pipes |
| 38 | SS Handle-Providing and fixing SS H handle having min 40 cm length in toughed glass door including all necessary screws etc. complete |
| 39 | SS Patch lock-Providing and fixing of glass door SS Patch Lock with out handle in toughened glass door including all necessary screws etc. complete |
| 40 | Wiring |
| 41 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C |
| 42 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C |
| 43 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire |
| 44 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 45 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 46 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire |
| 47 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.Group C |
| 48 | DB and Switchgear |
| 49 | Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 50 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door |
| 51 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) |
| 52 | Supply and Fixing of 40 A to 63 A, TP MCB in the existing MCB DB complete with connections, testing and commissioning etc. |
| 53 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 Way (4+18), Double door |
| 54 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 55 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 56 | Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps |
| 57 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps |
| 58 | Supplying and fixing TP sheet steel enclosure on surface/ recess along with 40 amps 415 volts \\"C\\" curve TP MCB complete with connections, testing and commissioning etc. as required. |
| 59 | Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel. making connections. etc. as required. 125 Amp,16 KA,TPMCCB |
| 60 | Fixtures |
| 61 | Supplying, conveyance and Installation of 150-250 mm sweep,1350 rpm, 3 - 5 blade BLDC Exhaust Fan including frames and all mounting accessories complete. Recommended Make: Atomberg Efficio/Crompton Brisk Air |
| 62 | SITC of recessed/surface LED downlight fitting 18W complete with high efficiency SMD LEDs, aluminium housing with powder coated finish, polycarbonate diffuser, independent electronic driver, suitable for operation on 140–270V AC supply, having minimum 1450 lumens output, CCT 4000K, CRI ≥80, power factor ≥0.9, THD <10%, LED life ≥50,000 hours, including fixing in false ceiling with necessary accessories, wiring, interconnections, testing and commissioning, conforming to IS 10322 & IS 15885 as required of approved make such as Havells / Philips / Wipro / or as per approved list of makes in the Tender document and approved by Engineer-in-Charge, with prior approval and submission of technical datasheets, test certificates and samples as required, complete in all respects. |
| 63 | Supply and Installation of surface/recess mounted LED 2x2 luminaire with CRCA housing suitable with fully diffused diffuser for general lighting. The luminaire should have CRI > 80 and CCT of both 6500K/5700K, Cool White Light. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3700 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 36 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make-Philips, Crompton, Wipro or equivalent |
| 64 | Supplying, conveyance and Installation of BLDC Type Wall Fan having 3 blade, 400 mm sweep, Speed 1350 rpm, Air Delivery 70 CMM minimum, Wall Mount Fan including frames and all mounting accessories complete. Recommended Make: Atomberg Renesa/V-Guard ENVIRO WF BLDC/Havells Platina |
| 65 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 66 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 67 | Supplying and fixing suitable size PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 68 | Supplying and fixing suitable size PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 69 | Supply, installation, testing and commissioning of LED Cove Light comprising 24V DC flexible LED strip, minimum 14 W/m, CRI ≥90, efficacy ≥100 lm/W, 3000K/4000K CCT, mounted in an anodized aluminium profile with opal diffuser, complete with electronic driver, connectors, mounting accessories, wiring, testing and commissioning. Make: Philips/Signify, Wipro, Havells, Crompton |
| 70 | Supply, installation, testing and commissioning of LED Cove Ceiling Light, recessed/surface mounted, 6–12 W, die-cast aluminium housing with opal polycarbonate diffuser, efficacy ≥100 lm/W, CRI ≥80, 3000K/4000K CCT, input 230V AC, 50Hz, power factor ≥0.95, IP20 protection, complete with electronic LED driver, mounting accessories, wiring, testing and commissioning. |
| 71 | Network System |
| 72 | Supply, installation, testing, and commissioning of an enterprise-grade managed network switch suitable for LAN access applications. The switch shall be provided with a minimum of 16 ports 10/100/1000 Mbps Ethernet ports and minimum 2 numbers SFP/SFP+ uplink ports, supporting non-blocking architecture with adequate switching capacity for full-duplex operation. The equipment shall support Layer-2 switching features including IEEE 802.1Q VLAN, STP/RSTP/MSTP, Link Aggregation (LACP), IGMP snooping, and Quality of Service (QoS) with traffic prioritization based on 802.1p/DSCP. The switch shall provide enterprise-grade security features such as port security, access control lists (ACLs), secure management through SSH/HTTPS/SNMPv3, and centralized authentication using RADIUS/TACACS+. Management shall be possible through web-based GUI, CLI, and SNMP, with support for logging, monitoring, and firmware upgrades. The switch shall comply with applicable IEEE standards, be rack-mountable with all accessories, operate on 230 V AC, 50 Hz power supply. Make : Cisco Catalyst / Fortinet / CommScope |
| 73 | Supply Installation Testing & Commissioning of 16 Port Loaded Cat 6 - U/UTP Modular Toolless Patch Panel having a metal structure enabling them to be durably fixed to the uprights of the 19\\" chassis. Include rear cable manager to hold cables without need for cable ties. The termination of I/0's shall be without any manual crimping tools. |
| 74 | Supplying and drawn of UTP 4 pair CAT 6A LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable including termination in both sides. |
| 75 | Supply and fixing of 4U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete |
| 76 | Supply and Fixing suitable size modular GI/PVC box with cover in front on and providing and fixing 1 no RJ 45 including connections as required. |
| 77 | Supply, Installation, Testing and Commissioning of Wifi Access Point with superior 802.11ac performance (up to 1.2Gbps) 2 x 2 (Transmit x Receive) with 2 streams of data for 2.4 GHz (300 Mbps) and 5 GHz (1750 Mbps) of reliable data delivery 802.11ac beamforming to improve range, minimizes interference while maximizing data rates Internal antennas for maximum RF performance. including Wall / Ceiling Mount Kit for fixing access points With required licenses & OEM technical support / warranty along with required accessories |
| 78 | Supply and laying of 1 metre long patch chord. |
| 79 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 80 | CCTV System |
| 81 | Supply, Conveyance and Installing of 4/5MP IP Bullet/Dome Camera having 1/3\\" Progressive Scan True Day and Night Colour IR Camera having effective pixel of 4/5 MP, Video frame rate of 4/5MP @30FPS, Minimum illumination of 0.01 [email protected], 0 lux@IR On, 30-50 M IR Range, 24 IR LED, AWB, AGC, BLC, 2D Noise reduction, with 3.6mm board lense, 12 VDC, PoE IP67 rated weatherproof performance. 1 year warranty. Make: Bosch/CP Plus/Honeywell/Hikvision or equivalent |
| 82 | Supply, installation, testing and Commissioning of 16 Ch Embedded Network Video Recorder with 4 HDD Bays Supports 4K Cameras, HDMI, VGA. Two-way Audio Input: 1ch, 3.5mm. IP Video Input: 16-Ch (Upgradable to 16 Channels).Incoming Bandwidth: 160Mbps. Outgoing Bandwidth: 160Mbps. HDMI Output. VGA Output. Audio Output. Compression:H.265+, H.265, H.264, MJPEG. Recording Resolution: 8MP/6MP/5MP/4MP/3MP/ 1080P. Network: 2×RJ45 self-adaptive 10/100/1000 Mbps network interfaces. 4 SATA interface. Up to 10TB for each HDD. 100~240V AC.support all channel Audio |
| 83 | Supply and Installation of Network Switch. 8 Port PoE Switch 1000BASE-T Copper Ethernet PoE+ connections, 10M/100M/1G RJ-45 copper ports, 1000BASE-X Fiber SFP ports, 8 port Auto sensing 10/100/1000 Mbps PoE, minimum CPU memory 512 MB with 2 SFP/combo ports, Energy Efficient Ethernet (IEEE 802.3az). Make: Cisco/CP Plus/ Netgear or equivalent |
| 84 | Supply of 2TB internal hard disk for use in Network Video Recorder (NVR) systems for CCTV/video surveillance. The hard disk shall be of surveillance-grade, specifically designed for 24×7 continuous operation and capable of handling multi-camera recording without data loss. The drive shall be of 3.5 SATA form factor with SATA III (6Gb/s) interface and optimized firmware for sequential write operations, vibration tolerance, low power consumption, and error recovery suitable for NVR workloads. The hard disk shall have a workload rating appropriate for continuous surveillance applications and be compatible with the specified NVR model. The supply shall include all necessary mounting accessories, cables, and connectors required for proper installation. |
| 85 | Supply and fixing of 4U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete |
| 86 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 87 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 88 | Supply, Installation, testing and commissioning of 43 inch smart 4k LED TV including mounting accessories accessories. Make: Sony/Samsung/LG |
| 89 | Supply and installation of 20 mtr HDMI cable. |
| 90 | Supplying and drawn of UTP 4 pair CAT 6A LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable including termination in both sides. |
| 91 | IP PBX System |
| 92 | Supply, Installation, Testing, Commissioning and Integration of enterprise-grade IP PBX System with support for minimum 500 SIP users, 80 concurrent calls, 50-party conference, 80 SIP trunk accounts, 4 FXO + 2 FXS ports, minimum 1.5 GHz Quad-Core processor, 1 GB DDR RAM, 8 GB eMMC Flash, compatible with minimum 12 SIP IP Phones with provision for future expansion. The system shall support SIP protocol, IVR, voicemail, call recording, call forwarding, transfer, conference, CDR, web-based management, and secure communication using SRTP, TLS, and HTTPS. The scope shall include all required licenses, configuration, programming, testing, commissioning, integration with 12 IP phones, accessories, and complete installation. Make: Matrix / Grandstream / Clixoo |
| 93 | Supply and Integration of Business IP Phone compatible with PoE and IP PBX system, having LCD Display of size minimum 2 inch along with accessories complete. Make: Matrix/Grandstream/Clixxo or equivalent. |
| 94 | Supplying and drawn of UTP 4 pair CAT 6A LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable including termination in both sides. |
| 95 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 96 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet |
| 97 | UPS System |
| 98 | Supply, Installation, Testing and Commissioning of True on-line Double Conversion 15 KVA UPS system with 3:3 Crest Factor Three Phase Input Three Phase Output. Inversion shall be Microprocessor controlled with instantaneous sine wave Control using IGBT. UPS shall have standard display features, alarms, safeties, etc Input Voltage range : a) Phase – Three Phase with ground b)Votage range 190 VAC – 470 VAC c)Input Frequency :50/60 Hz d)Power Factor : 0.95 or above e)THD : less than 5% with full load Bypass f) Voltage Range – 200VAC – 240 VAC ) Frequency range – 45-55 Hz/55-65 Hz Output Voltage Range h)Voltage Range – 200VAC – 240 VAC i)Frequency range – 50/60 Hz j)Voltage distortion – linear load <= 2% k)Voltage distortion – nonlinear load <= 5% l)Output waveform – pure sinewave m) Crest Factor – 3:1 Minimum Back up time : Continuous 60 Minutes at full load Rectifier shall be Full wave Type (Shall fully meet the specified input power requirements) Battery Type: Sealed Lead Acid Maintenance Free DC Voltage : 96V DC System, Battery Nos and capacity shall be designed for optimum storage space. Installation &Commissioning Required Breakers also needs to be provided in input and output side for the UPS. Make: Liebert Vertiv/APC by Schneider/Numeric by Legrand |
| 99 | LT Cabling and End Termination |
| 100 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp |
| 101 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp |
| 102 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 95 sq mm |
| 103 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 104 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm) |
| 105 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm) |
| 106 | Air Conditioning System |
| 107 | Supply, Installation, testing and commissioning of Cassette type Air Conditioner of following capacity and specifications: Consisting of ceiling-mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of energy-efficient suitable rotary compressor for operation on single-phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation, with R-32/R-410A or equivalent refrigerant and fixing of room (fan coil) unit on ceiling, standard 3m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigerant gas etc complete as required. (Make: Blue Star, Daikin, Hitachi, Carrier or equivalent). Minimum 2 TR 3 Star rated (inverter type AC) as per BEE |
| 108 | Additional refrigerant Copper piping for Split ACs : Supplying and installation of additional refrigerant piping consisting good quality copper tubing, Elastomeric Nitrile rubber insulation etc. |
| 109 | Drain Piping for Split ACs: Supply & installation of PVC insulated piping for condensate drain Including wall chasing, necessary supports, Clamps etc complete as required |
| 110 | Metering Cubicle |
| 111 | Supply, installation, testing and commissioning of a dust-proof and vermin-proof wall-mounted outdoor KSEB metering panel housed in a weatherproof synthetic (polycarbonate/FRP) meter box enclosure with lockable double doors, suitable for outdoor applications. The metering panel shall be UV-resistant, corrosion-free, and shall comply with the requirements of KSEB and the Electrical Inspectorate. The panel shall be equipped with one 125A, 16-25kA, 4-pole MCCB with thermal-magnetic release, one set of spreader terminals, and an LT type three-phase energy meter complete with a transparent viewing window for meter reading. The scope shall also include all necessary internal wiring, terminal blocks, gland plates, earthing arrangements, mounting accessories, and associated hardware required for complete installation. The enclosure shall have a minimum degree of protection of IP54 and the entire system shall be installed, tested, and commissioned in accordance with the latest EB, CEA, and Electrical Inspectorate regulations, complete. |
| 112 | Earthing |
| 113 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 114 | Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 115 | Public Address System |
| 116 | Supply, installation, testing and commissioning of a complete 120 W, 100 V line background music system comprising 12 Nos. ceiling-mounted 6 W/10 W speakers, one 120 W mixer amplifier with Bluetooth, USB, FM, AUX and microphone inputs, one wired handheld microphone, speaker cables, conduits, connectors, mounting accessories and all other necessary materials for complete installation. The system shall provide uniform, clear and distortion-free audio coverage throughout the physiotherapy centre and shall be suitable for background music and voice announcements. The work shall include wiring, testing, commissioning and demonstration of the complete system. Makes: Bosch, TOA, Ahuja, Honeywell, JBL Commercial, Yamaha, Bose Professional Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender