Tender For Renovation Of Firefighting System Including Installation Of Pumps And Laying Of Ms Pipeline With Accessories At Multiple Slipway, Marine Dockyard, Sri Vijaya Puram
Tender Value
19.22 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
17 days left
EMD
38459
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Firefighting System Including Installation Of Pumps And Laying Of Ms Pipeline With Accessories At Multiple Slipway, Marine Dockyard, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Cutting and removing RCC/rich mix by using pavement breaker including cost of hire charges of pavement breaker and the work shall be carried out as per the direction of the EIC.The rates including cost of hire charges of pavement breaker or air comprssor with POL and operator all labour charges for breaking and stacking of unserviceableand serviceable materials, gas cutter & minor T&P, transportation of materials, GST, LWC, ..etc , complete. |
| 2 | Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work upto plinth level.1:3:6 (1 cement, 3 pulverised stone sand and 4 grade stone aggregate 20mm nominal size).The work shall be carried out as per the direction of the EIC.. The rates including cost of cement, all other materials, all labour charges, materials, minor T&P, transportation of materials, GST, LWC, ..etc , complete. |
| 3 | Providing form work including centering shuttering so as to give rough finish strutting and propping etc. height of propping and centering below supporting floors to ceiling not exceeding 4m and removal of the same for in site reinforced concrete and plain concrete work in:(a) foundation footings bases of coloumns etc and mass concrete.The work shall be carried out as per the direction of the EIC.The rates including cost of all labour charges, all other materials, minor T&P, transportation of materials, GST, LWC, ..etc , complete. |
| 4 | Providing and fixing Heavy Duty MS pipes conforming to IS 1239 (Part 1) Class 'C'of nominal bore 80 mm (3\\" dia) complete with fittings. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate is including the cost of MS pipes and fittings, cutting, threading, welding/jointing, trenching and refilling, all labour, materials, T&P, transportation, LWC, GST, etc., complete. |
| 5 | Providing and fixing Heavy Duty MS pipes conforming to IS 1239 (Part 1) Class 'C' of nominal bore 100 mm (4\\" dia) complete with fittings. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate is including the cost of MS pipes and fittings, cutting, threading, welding/jointing, trenching and refilling, all labour, materials, T&P, transportation, LWC, GST, etc., complete. |
| 6 | Providing and fixing approved quality Heavy Duty MS Bend conforming to IS 1239 (Part 2) of nominal bore 80 mm (3\\" dia), including cutting, threading, jointing, and welding. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS bend, jointing materials, cutting/welding charges, all labour, T&P, transportation, LWC, GST, etc., complete |
| 7 | Providing and fixing approved quality Heavy Duty MS Bend conforming to IS 1239 (Part 2) of nominal bore 100 mm (4\\" dia), including cutting, threading, jointing, and welding. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS bend, jointing materials, cutting/welding charges, all labour, T&P, transportation, LWC, GST, etc., complete |
| 8 | Making connection of MS distribution branch pipe to 100 mm (4\\") nominal bore main header line by providing and fixing Heavy Duty MS 'T' Joint conforming to IS 1239 (Part 2) [3\\" dia & 4\\"dia], including cutting, threading, and welding. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS 'T' joint, cutting and welding charges, all labour, required jointing materials, minor T&P, transportation, LWC, GST, etc., complete |
| 9 | Providing and fixing Gunmetal (GM) Single Landing / Hydrant Valve of 63 mm nominal size, ISI marked conforming to IS 5290, complete with blank cap, chain, and flanged/threaded jointing accessories. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of GM hydrant valve, blank cap with chain, bolts, nuts, rubber washer/gasket, fixing, all labour, T&P, transportation, LWC, GST, etc., complete. |
| 10 | Providing and fixing Heavy Duty Mild Steel (MS) companion flanges conforming to IS 6392 / IS 1239 for 80 mm (3\\") and 100 mm (4\\") nominal bore MS pipes, fittings, tees, and bends, including welding, alignment, and jointing with MS bolts, nuts, washers, rubber insertion gasket, and gasket shellac as required. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS flanges, MS bolts and nuts, rubber gaskets, jointing compound, gas cutting, electric welding electrodes, hire charges of welding equipment, all labour, T&P, transportation, LWC, GST, etc., complete |
| 11 | Removing all scales, rust, and dust, degreasing the surface, and thereafter painting MS pipes, fittings, accessories, motor with pumpset, and base frame by applying one coat of Zinc Phosphate primer followed by two coats of synthetic enamel paint. The work shall be carried out as per the directions of the EIC. The rate includes cost of all paints, primer, solvents, surface cleaning tools, scaffolding arrangements, all labour charges, T&P, transportation of materials, LWC, GST, etc., complete |
| 12 | Installation, Testing & Commissioning of 01 No. electrically operated water pump at Slipway Firefighting Pump House, Dry Dock Complex. The work shall be carried out as per the directions of the EIC. The rate excludes the cost of the electrical water pump, which will be supplied free of cost by the Department, but includes installation (positioning, alignment, grouting, connection to suction and delivery pipelines), testing & commissioning, all labour charges, required jointing materials, T&P, transportation of materials, LWC, GST, etc., complete. |
| 13 | Supply, Installation, Testing & Commissioning of 01 No. Star-Delta Starter for operating electrically operated water pump (50 HP motor) with safe motor protection and all required accessories including copper cable connection from starter to motor and copper earthing at Slipway Firefighting Pump House, Dry Dock Complex. The work shall be carried out as per the directions of the EIC. The rate includes cost of starter, copper cable, earthing materials, installation, testing & commissioning charges, all labour charges, minor T&P, transportation of materials, LWC, GST, etc., complete |
| 14 | Installation, Testing & Commissioning of 01 No. diesel-operated water pump at Slipway Firefighting Pump House, Dry Dock Complex. The work shall be carried out as per the directions of the EIC. The rate excludes the cost of the diesel pump, which will be supplied free of cost by the Department, but includes installation, testing & commissioning charges, alignment, connection to pipelines, all labour charges, required jointing materials, T&P, transportation of materials, LWC, GST, etc., complete. |
| 15 | Dismantling of existing electrically operated firefighting pump assembly from the foundation, including dismantling of suction and delivery pipelines along with all connected accessories at Slipway Firefighting Pump House, Dry Dock Complex. The work shall be carried out as per the directions of the EIC. The rate includes gas-cutting charges, unbolting, stacking of materials, all labour charges, T&P, transportation of materials, LWC, GST, etc., complete. |
| 16 | Providing and fixing Cast Iron (CI) Gate Valve 100 mm dia. double-flanged type (conforming to IS 14846 / IS 780). The work shall be carried out as per the directions of the EIC. The rate includes cost of CI Gate Valve, MS bolts with nuts, rubber gaskets, fixing charges, all labour charges, required materials, minor T&P, transportation of materials, LWC, GST, etc., complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender